Search USGS⌕ Search

USGS · wsp1655

Ground water in the Pullman area, Whitman County, Washington

Abstract

This report presents the results of an investigation of the ground-water resources of the Pullman area, Whitman County, Wash. The investigation war made in cooperation with the State of Washington, Department of Conservation, Division of Water Resources, to determine whether the 1959 rate of ground-water withdrawal exceeded the perennial yield of the developed aquifers, and if so, (1) whether additional aquifers could be developed in the area, and (2) whether the yield of the developed aquifers could be increased by artificial recharge. The Pullman area includes the agricultural district surrounding the city of Pullman, in southeastern Whitman County, and the western two-thirds of the Moscow-Pullman basin, which extends into Latah County, Idaho. The mapped area comprises shout 250 square miles. The area is in a region of smooth rolling hills formed by erosion of thick deposits of loess, which cover a dissected lava plain. The loess (Palouse formation of Pleistocene age) ranges in thickness from less than 1 foot to more than 150 feet. The underlying lava flows, part of the Columbia River basalt of Tertiary age, are nearly horizontal and form bluffs and low cliffs along the major streams. The total thickness of the basalt sequence in the area is not known, but it may be considerably greater than 1,000 feet beneath the city of Pullman. The basalt sequence is underlain by a basement mass of granite, granite gneiss, and quartzite, of pre-Tertiary age. The most productive aquifers in the area are in the Columbia River basalt. They consist of the permeable zones, commonly occurring at the tops of individual lava flows, which may contain ground water under either artesian or water-table conditions. Two such permeable zones have produced more than 95 percent of the ground water used in the Pullman area, or as much as 870 million gallons per year (1957). These two zones are hydraulically connected and lie at depths ranging from about 50 to 170 feet below the land surface at Pullman. The area receives about 21 inches of precipitation annually, about two-thirds of it from October through March. 0nly a fraction of the precipitation reaches the aquifers; the remainder is returned to the atmosphere by evapotranspiration or leaves the area as surface runoff. The basalt is recharged mainly by infiltration from streams and downward percolation from the overlying loess. The ground water moves generally westward. However, most water in the artesian aquifers tapped by wells in the vicinity of Pullman may move toward the city of Pullman, which is the center of major pumping. The rate of movement ranges from extremely slow in the loess and the massive basalt to very rapid in the permeable zones of basalt. The principal modes of discharge from the artesian aquifers are seepage to streams and pumpage from wells. The amount of natural discharge is unknown, but the pumpage ranged from about 340 to 870 million gallons per year, and during 1949-59 it averaged about 800 million gallons (2,500 ac-ft) per year. For about the last 25 years at least, the piezometric surface of the artesian zones has declined each year, indicating that the annual ground-water discharge from the artesian aquifers (including pumpage and natural discharge) has exceeded the recharge in the Pullman area. An analysis of the relation of pumpage to the decline in artesian level indicates that during 1952-59 an average of about 65 million gallons per year was removed from storage. Although the decline in artesian pressures has resulted in an increase in the recharge to the aquifers, the present rate of pumping may be equal to or even exceed the perennial yield of the artesian aquifer in the report area under natural conditions. Geologic and hydrologic conditions seem favorable for the existence of potentially good aquifers below those which are now extensively developed. The deep aquifers seem to have only a slight hydraulic connection with the overlying artesian basalt

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

B. L. Foxworthy, R.L. Washburn. 1963. Ground water in the Pullman area, Whitman County, Washington. https://doi.org/10.3133/wsp1655

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper↗

Use of stable isotopes of carbon, nitrogen, and sulfur to identify sources of nitrogen in surface waters in the lower Susquehanna River basin, Pennsylvania

With the exception of sewage and septic effluents, most nitrogen sources and soils contain larger proportions of organic and reduced forms of carbon, nitrogen, and sulfur than inorganic, oxidized forms. In contrast, most surface water and ground water contains larger proportions of dissolved inorganic carbon, nitrogen, and sulfur forms than organic forms. Data indicate that carbon, nitrogen, and sulfur are extensively processed in soils and streams.

Water Supply Paper↗

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper↗