Search USGS⌕ Search

USGS · wsp1475M

Ground-water resources of the Bryce Canyon National Park area, Utah, with a section on the drilling of a test well

Abstract

The water need at Bryce Canyon National Park in 1957 was about 1.3 million cubic feet for a tourist season that lasted from the middle of May to the middle of October. To evaluate the adequacy of water-supply sources, a hypothetical future need of 5 million cubic feet of water per season is used. This amount of water might be obtained from the East Fork of the Sevier River, from wells in the alluvium of the East Fork, from Yellow Creek Spring and nearby springs, which are below the canyon rim, or from a well drilled about 2,000 feet to the top of the Tropic shale. Although the present source of water, consisting of wells in the alluvium of East Creek valley, may be an important supplemental source in the future, it will not yield sufficient water in dry years to meet the total demand for water at the park. The yield of Yellow Creek Spring and nearby springs is estimated at a total of 7.8 million cubic feet of water per season. The springs provide water of satisfactory chemical quality, and are a reliable source even in times of drought. A serious disadvantage of using this source of water is the difficulty of constructing a pipeline over extremely rugged terrain from the source to the lodge and headquarters area. A well drilled to the top of the Tropic shale of Cretaceous age in the lodge and headquarters area might penetrate two or more aquifers, one at the base of the Wasatch formation of Eocene age and one or more in the Wahweap and Straight Cliffs sandstones of Cretaceous age. The yield of this well would depend to a large degree on the number of fractures encountered. To assure the most favorable conditions for intercepting fracture zones in the bedrock, a test-well site is proposed near the crest of a gentle anticline where tension fractures in the rocks should be common. Shallow wells in the alluvium of East Creek valley cannot be depended upon to yield sufficient water in times of drought, but they are nevertheless an important source. The water-storage capacity of the alluvium of East Creek valley in the vicinity of the wells of the Utah Parks Co. is estimated at 1.4 million cubic feet. By lowering the water table in the valley uniformly without creating excessively large cones of depression, the alluvium could supply the 1.3 million cubic feet of water per season estimated as the water need in 1957. However, in times of drought this alluvium cannot supply the hypothetical future needs of 5 million cubic feet of water per season.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 37.27074325321638° to 37.73847091078626° latitude; -112.47262325325637° to -112.06792128542472° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

I. Wendell Marine. 1963. Ground-water resources of the Bryce Canyon National Park area, Utah, with a section on the drilling of a test well. https://doi.org/10.3133/wsp1475m

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Basic ground-water hydrology

Ground water is one of the Nation's most valuable natural resources. It is the source of about 40 percent of the water used for all purposes exclusive of hydropower generation and electric powerplant cooling. Surprisingly, for a resource that is so widely used and so important to the health and to the economy of the country, the occurrence of ground water is not only poorly understood but is also, in fact, the subject of many widespread misconceptions. Common misconceptions include the belief that ground water occurs in underground rivers resembling surface streams whose presence can be detected by certain individuals. These misconceptions and others have hampered the development and conservation of ground water and have adversely affected the protection of its quality. In order for the Nation to receive maximum benefit from its ground-water resource, it is essential that everyone, from the rural homeowner to managers of industrial and municipal water supplies to heads of Federal and State water-regulatory agencies, become more knowledgeable about the occurrence, development, and protection of ground water. This report has been prepared to help meet the needs of these groups, as well as the needs of hydrologists, well drillers, and others engaged in the study and development of ground-water supplies. It consists of 45 sections on the basic elements of ground-water hydrology, arranged in order from the most basic aspects of the subject through a discussion of the methods used to determine the yield of aquifers to a discussion of common problems encountered in the operation of ground-water supplies. Each section consists of a brief text and one or more drawings or maps that illustrate the main points covered in the text. Because the text is, in effect, an expanded discussion of the illustrations, most of the illustrations are not captioned. However, where more than one drawing is included in a section, each drawing is assigned a number, given in parentheses, and these numbers are inserted at places in the text where the reader should refer to the drawing. In accordance with U.S. Geological Survey policy to encourage the use of metric units, these units are used in most sections. In the sections dealing with the analysis of aquifer (pumping) test data, equations are given in both consistent units and in the inconsistent inch-pound units still in relatively common use among ground-water hydrologists and well drillers. As an aid to those who are not familiar with metric units and with the conversion of ground-water hydraulic units from inch-pound units to metric units, conversion tables are given on the inside back cover. Definitions of ground-water terms are given where the terms are first introduced. Because some of these terms will be new to many readers, abbreviated definitions are also given on the inside front cover for convenient reference by those who wish to review the definitions from time to time as they read the text. Finally, for those who need to review some of the simple mathematical operations that are used in ground-water hydrology, a section on numbers, equations, and conversions is included at the end of the text.

Water Supply Paper↗

Use of stable isotopes of carbon, nitrogen, and sulfur to identify sources of nitrogen in surface waters in the lower Susquehanna River basin, Pennsylvania

With the exception of sewage and septic effluents, most nitrogen sources and soils contain larger proportions of organic and reduced forms of carbon, nitrogen, and sulfur than inorganic, oxidized forms. In contrast, most surface water and ground water contains larger proportions of dissolved inorganic carbon, nitrogen, and sulfur forms than organic forms. Data indicate that carbon, nitrogen, and sulfur are extensively processed in soils and streams.

Water Supply Paper↗

Validation of a numerical modeling method for simulating rainfall-runoff relations for headwater basins in western King and Snohomish Counties, Washington

The validity of a previously determined numerical modeling method was assessed. Numerical models for 11 drainage basins were constructed with the Hydrologic Simulation Program-FORTRAN (HSPF) with parameter values that were generalized for the physiographic region. Large and recurrent simulation errors were initially identified, but three systematic modifications of the models corrected those errors for 10 out of the 11 basins. The validity of the numerical modeling method for simulating rainfall-runoff relations in the study area, as modified during this investigation, was not rejected, but observed streamflow data were needed to apply the method.

Water Supply Paper↗