Search USGS⌕ Search

USGS · sir20205072

Quality of pesticide data for groundwater analyzed for the National Water-Quality Assessment Project, 2013–18

Abstract

The National Water-Quality Assessment (NAWQA) Project of the U.S. Geological Survey (USGS) submitted nearly 1,900 samples collected from groundwater sites across the United States in 2013–18 for analysis of 225 pesticide compounds (pesticides and pesticide degradates, hereafter referred to as “pesticides”) by USGS National Water Quality Laboratory schedule 2437 (S2437). For the associated NAWQA study of pesticide occurrence and concentration in groundwater, and for other studies using pesticide results determined by S2437, it is necessary to assess the ability of reported results to meet data-quality requirements that will allow study objectives to be achieved. This assessment of the quality of S2437 results reported in 2013–18 examined data from field and laboratory quality-control samples, along with third-party performance assessment samples, to estimate bias and variability and to identify their potential sources, with an emphasis on implications for the interpretation of pesticide data for groundwater. Results indicate that measurements produced by the S2437 method for most pesticides have bias and variability that would be considered acceptable for many interpretative studies, which could therefore use the results without qualification or censoring. However, the reported data for a subset of pesticides have the potential for unacceptable contamination bias, high or low recovery bias, or high variability as a consequence of method performance and (or) nonlaboratory factors that could preclude their use for certain common objectives or could necessitate adjustment or qualification to meet those objectives. Based on data for laboratory blanks, censoring of some detections for a subset of pesticides reported by the laboratory in environmental samples might be necessary or desirable to avoid an unacceptably high likelihood of a false-positive result caused by laboratory contamination. The 90-percent upper confidence limit for the 95th percentile of laboratory blank concentration equals or exceeds the minimum reported groundwater concentration in at least 1 water year for 28 pesticides. During at least 1 water year, this upper confidence limit exceeds the maximum laboratory detection limit for 17 pesticides and exceeds the maximum laboratory reporting limit for 3 pesticides (ametryn, atrazine, and diazinon). The level of contamination indicated by this upper confidence limit should not substantially affect the suitability of reported environmental concentrations for any compound for comparison with corresponding human-health benchmarks. Despite being subjected to the same laboratory processes as laboratory blanks, field blanks indicated little evidence of contamination bias. This observation could largely be the consequence of data-reporting practices, which utilize detections in laboratory blanks to censor results in associated field samples (including blanks and environmental samples) when relative concentrations indicate that a result could have a substantial contribution from laboratory contamination. Laboratory censoring appears likely to reduce the risk of false-positive results in environmental samples below the level that laboratory blank results alone would imply. Whereas data available for third-party blind blank samples analyzed in 2018 indicate that only propoxur had any false-positive results, data for pesticides that were not spiked into blind spike samples analyzed in 2013–18 indicate that the false-positive rates for 31 pesticides exceeded 1 percent when considering only detections reported at concentrations greater than the maximum detection limit. Although about half of these pesticides lack substantial supporting evidence of contamination bias based on laboratory blank or field blank detections, indicating that spiking issues or degradation of parent compounds within the spiked samples might be a contributing factor to some false-positive results, these results indicate the need to closely examine detections reported for some pesticides in environmental samples analyzed during a similar period for possible contributions from contamination bias. Data for blind spike samples that were spiked at concentrations above the maximum reporting limit indicate that false-negative rates for eight pesticides exceed 10 percent; substantial low bias could affect results reported for these pesticides in environmental samples analyzed during a similar period. Data for laboratory reagent spikes, which measure recovery of pesticides in blank water, show little evidence for unacceptable recovery bias for S2437 pesticides. However, field matrix spikes, which measure recovery of pesticides in environmental matrices, indicate that degradation and (or) matrix effects could result in moderate to substantial low bias for groundwater results for several pesticides. Low bias could cause some reported concentrations to be categorized as being below a benchmark when the actual concentration in groundwater is greater than the benchmark. Occurrence and concentrations in groundwater could be substantially underrepresented for six pesticides with benchmarks (1H-1,2,4-triazole, asulam, bifenthrin, cis-permethrin, fenbutatin oxide, and naled) that have median recoveries between zero and 50 percent in field matrix spikes. Two compounds (didealkylatrazine and 2-hydroxy-6-ethylamino-4-amino-s-triazine) have median recoveries near or greater than 150 percent in field matrix spikes, indicating a substantial high bias. Plots of data for all spike types show clear changes in the typical recovery with time for some pesticides, which would require further examination for evaluation of temporal trends in environmental concentrations. Data for laboratory reagent spikes indicate that nearly all S2437 pesticides have acceptable variability resulting from random measurement error. Only two compounds (fenbutatin oxide and naled) have F-pseudosigma values greater than 30 percent for recovery, which implies the potential for relatively high variability in reported concentrations and could affect comparison of concentrations to benchmarks and determination of whether concentrations for samples collected at separate locations or times are truly different with a specified level of confidence. Data for third-party blind spike samples show relatively high variability for a greater number of pesticides, although these results likely reflect the influence of degradation and (or) differences in the magnitude and variability of concentrations used for blind spikes relative to laboratory reagent spikes. Detailed analysis of variability using field replicate data is possible for only 12 pesticides on S2437; low variability in analyte detection and concentration is indicated for most of these pesticides in groundwater.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 25.08° to 49.38905° latitude; -124.68721° to -66.96466° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Laura M. Bexfield, Kenneth Belitz, Mark W. Sandstrom, Delicia Beaty, Laura Medalie, Bruce D. Lindsey, Lisa H. Nowell. 2020-07-27. Quality of pesticide data for groundwater analyzed for the National Water-Quality Assessment Project, 2013–18. https://doi.org/10.3133/sir20205072

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

Scientific Investigations Report↗

Groundwater budget for the Portneuf River Basin, southeastern Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources, developed the first groundwater budget for the upper Portneuf River Basin in southeastern Idaho, a tributary of the Snake River. A groundwater budget for the Portneuf River Basin supports water resource and administrative management decisions within the basin and for downstream users of the eastern Snake River Plain aquifer. The analysis quantifies inflows, outflows, and residuals for an aquifer system defined by the Idaho Department of Water Resources under three recent precipitation conditions: an average year (2016), a dry year (2021), and a wet year (2023). The budget was calculated for the basin and for two subbasins delineated by the U.S. Geological Survey streamgage Portneuf River at Topaz, Idaho (13073000): the above Topaz subbasin, which includes the Portneuf-Gem valley, and the below Topaz subbasin, which includes Marsh Valley. Aquifer inflows include mountain-front recharge; areal recharge; recharge from applied water, including recharge from irrigation, canal seepage, and effluent returns; groundwater flow into the basin; and reservoir seepage. Outflows include groundwater pumping for agricultural, municipal, and domestic uses; subsurface outflow through the Portneuf gap; and discharge to streams as base flow. Estimated annual inflows for the full basin ranged from 116,880 acre-feet in 2021 to 154,880 acre-feet in 2023, and outflows ranged from 132,190 acre-feet in 2016 to 158,490 acre-feet in 2023. Basinwide residuals, the change in storage plus uncertainty, were −2,410 acre-feet in 2016, −18,410 acre-feet in 2021, and −3,610 acre-feet in 2023, and each subbasin had a mixture of negative and positive residuals. These basinwide results, interpreted as change in storage plus water-budget uncertainty, indicate minor net losses that increase with dry conditions, consistent with well depth-to-water measurements indicating gradual multi-decadal declines. Patterns in subbasin residuals are driven by irrigation practices and surface-water management; for example, the above Topaz subbasin relies more on groundwater for irrigation, resulting in more negative residuals during dry years. In contrast, the below Topaz subbasin depends more on surface water, producing positive residuals during dry years because of irrigation losses and canal seepage. The analyses for both subbasins indicate decades-long groundwater declines, which agree with the overall negative residuals calculated. The largest sources of uncertainty include climate inputs (precipitation and evapotranspiration) and poorly constrained components such as groundwater inflow and tributary stream infiltration. These findings provide insight into how climatic variables and irrigation practices affect groundwater inflows and outflows within the Portneuf River Basin.

Idaho↗

World minerals outlook—Antimony, copper, graphite, niobium, potash, silicon, silver, and tungsten through 2030

Demand for mineral commodities continues to increase owing to rapid technological advancements and global economic growth. To support this increase in demand, information about current and near-term supplies of these mineral commodities is essential. Such data help evaluate the health and stability of global supply chains and protect against potential supply risks. Current production and production capacity data coupled with information regarding near-term expected changes (such as facility closures, planned expansions, or the completion of new mineral production projects) can provide insight into expected future market developments and expected available supply of mineral commodities. This report within the “World Minerals Outlook” series analyzes data for antimony, copper, natural graphite, niobium, potash, silicon metal, silver, and tungsten—eight mineral commodities listed in the 2025 List of Critical Minerals. World production data from 2019 through 2025, as well as estimated world capacity data from 2023 through 2025 were analyzed. Using these data, near-term (2026–2030) expected world capacities were estimated. For antimony, copper, niobium, silicon metal, silver, and tungsten, modest increases in production capacity of 4 to 10 percent were expected between 2025 and 2030, whereas capacities for natural graphite and potash were expected to increase by about 18 to 20 percent.

Scientific Investigations Report↗