Search USGS⌕ Search

USGS · ofr88298

Maps showing the Seabeam bathymetry and sedimentologic and biologic sample locations on Horizon Guyot, Mid-Pacific Mountains and a summary of existing data

Abstract

Horizon Guyot (Fig. 1) is a 300-km-long, 75-km-wide volcanic ridge with a relatively flat summit that is diagnostic of guyots (Hess, 1946). The U. S. Geological Survey (USGS) began a study of Horizon Guyot in 1983 as part of a program on the origin, distribution, and composition of ferromanganese-oxide precipitates that encrust the hard substrate of sea floor edifices, such as seamounts and volcanic ridges (Hein and others, 1985a). Mass movement and bedload transport of sediment appears to influence the thickness of these crusts on seamount flanks (Hein and others, 1985b). Because Horizon Guyot has been studied more extensively than any other volcanic edifice in the Mid-Pacific Mountains (Heezen, Fischer, and others, 1971; Lonsdale and others, 1972; Winterer, Ewing, and others, 1973), it was chosen as the principal site for a USGS study of sediment transport processes and the geotechnical behavior of sediment on seamounts (Cacchione and others, 1988; Schwab and others, 1988). In March, 1987, Horizon Guyot was again investigated using the R/V ATLANTIS II and the D.S.R.V. ALVIN (cruise 118-12); sponsored by the National Science Foundation. Although primarily a biologic investigation, observations from 10 submersible dives, bottom samples collected at depth using ALVIN and from the surface using the ATLANTIS II, and Seabeam swath-bathymetry (sponsored by the USGS and the Office of Naval Research) add to the overall Horizon Guyot data set. In this report, we summarize the existing data base, present a Seabeam bathymetric map of the study area, ALVIN dive tracklines, the sample locations, and a brief description of the samples collected or other station activities on the ATLANTIS II cruise 118-12. The detailed bathymetric map of the study area (Plate 1) was constructed by merging data obtained by a Deep-Tow study (Lonsdale and others, 1972) (Fig. 1) with data obtained from the swath-bathymetry mapping system onboard the ATLANTIS II. Detailed information on the Seabeam bathymetric system is given by Renard and Allenou (1979).

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

W. C. Schwab, J.R. Hein, K.L. Smith, C. P. de Moustier, L.A. Levin, Amatzia Genin, W.W. Wakefield, R.J. Baldwin. 1988. Maps showing the Seabeam bathymetry and sedimentologic and biologic sample locations on Horizon Guyot, Mid-Pacific Mountains and a summary of existing data. https://doi.org/10.3133/ofr88298

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗