Search USGS⌕ Search

USGS · ofr811303

Stratigraphy, sedimentology, and paleomagnetism of the Coral Ridge sand body, eastern Taylor Valley, Victoria Land, Antarctica

Abstract

A body of moderately well sorted and well stratified ice-cemented sand, here informally called the Coral Ridge sand body, was deposited across eastern Taylor Valley before the deposition of a veneer of glaciogenic deposits related to late Pleistocene incursions of the Ross Sea ice sheet. The Coral Ridge sand body is more than 50 m thick where preserved in a north-south trending ridge that is transverse to the long axis of the valley. The ridge forms a drainage divide that stands 100 m above sea level and separates the basin of Lake Fryxell on the west from the seacoast to the east. An erosion surface having about 35 m of abrupt local relief was apparently developed on the sand body before the latest incursions of Ross Sea ice. The Coral Ridge sand body accumulated in a fluviatile or possibly fluviomarine deltaic environment following deposition of coarse diamictons and interbedded layers of sand in a fjord that once occupied the site of Taylor Valley. From its sedimentary characteristics and topographic distribution, the sand was deposited across the valley following filling of the fjord. The 1) comparatively high degree of sorting, 2) general lack of clay and silt, and of very coarse detritus, and 3) common fluviatile cross-stratification, argue for stream transport and for accumulation principally above sea level. Coarse glacial detritus, which must have existed in the source area, was not transported to the area of sand deposition. Very fine glacial detritus that presumably was transported with the sand was deposited some place beyond the area of sand deposition. Evidence bearing on the direction of transport, and thus the source area, has not yet been developed. The source could have been a grounded ice sheet in the Ross Sea to the east, or alternatively, the source could have lay to the west in the area of the Lake Fryxell basin at a time when the basin was occupied by a more extensive Taylor Glacier. Evidence bearing on the age of the Coral Ridge sand body also is not fully developed. West of the Coral Ridge divide, the upper 2-3 m of a 14-mthick section of Coral Ridge sand near the top of hole DVDP-11 is reversely polarized. All other beds of the ice-cemented sand have been found to be normally polarized. Two possibilities exist: 1) the Coral Ridge sand body was deposited during late Pliocene time, mainly during a time of normal polarity of the Gauss polarity epoch, or 2) the sand body is much younger and was deposited during the Bruhnes normal polarity epoch of Pleistocene time, less than 730,000 years ago (in which case, the reversely polarized strata are anomalous). Additional subsurface and surface geological and paleomagnetic study is required to resolve the problems of age and source, critical to deciphering the late Cenozoic glacial and structural history of Taylor Valley and environs.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: -82.5710101751638° to -67.99793782179677° latitude; 117.11717607954807° to 168.72269363226718° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Donald Parker Elston, Paul H. Robinson, Stephen L. Bressler. 1981. Stratigraphy, sedimentology, and paleomagnetism of the Coral Ridge sand body, eastern Taylor Valley, Victoria Land, Antarctica. https://doi.org/10.3133/ofr811303

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗