Search USGS⌕ Search

USGS · ofr7453

Reconnaissance engineering geology of Sitka and vicinity, Alaska, with emphasis on evaluation of earthquake and other geologic hazards

Abstract

A program to study the engineering geology of most of the larger Alaska coastal communities and to evaluate their earthquake and other geologic hazards was started following the 1964 Alaska earthquake; this report about Sitka and vicinity is a product of that program. Field-study methods were of a reconnaissance nature, and thus the interpretations in the report are subject to revision as further information becomes available. This report can provide broad geologic guidelines for planners and engineers during preparation of land-use plans. The use of this information should lead to minimizing future loss of life and property due to geologic hazards, especially during very large earthquakes. Landscape of Sitka and surrounding area is characterized by numerous islands and a narrow strip of gently rolling ground adjacent to rugged mountains; steep valleys and some fiords cut sharply into the mountains. A few valley floors are wide and flat and grade into moderate-sized deltas. Glaciers throughout southeastern Alaska and elsewhere became vastly enlarged during the Pleistocene Epoch. The Sitka area presumably was covered by ice several times; glaciers deeply eroded some valleys and removed fractured bedrock along some faults. The last major deglaciation occurred sometime before 10,000 years ago. Crustal rebound believed to be related to glacial melting caused land emergence at Sitka of at least 35 feet (10.7 m) relative to present sea level. Bedrock at Sitka and vicinity is composed mostly of bedded, hard, dense graywacke and some argillite. Beds strike predominantly northwest and are vertical or steeply dipping. Locally, bedded rocks are cut by dikes of fine-grained igneous rock. Host bedrock is of Jurassic and Cretaceous age. Eight types of surficial deposits of Quaternary age were recognized. Below altitudes of 3S feet (10.7 m), the dominant deposits are those of modern and elevated shores and deltas; at higher altitudes, widespread muskeg overlies a mantle of volcanic ash which commonly overlies glacial drift. Alluvial deposits are minor. Man-emplaced embankment fill, chiefly sandy gravel, covers many muskeg and former offshore areas; quarried blocks of graywacke are placed to form breakwaters and to edge large areas of embankment fill and modified ground. The geologic structure of the area is known only in general outlines. Most bedded Mesozoic rocks probably are part of broad northwest-trending complexes of anticlines and synclines. Intrusion of large bodies of plutonic igneous rocks occurred in Tertiary and Cretaceous time. Extensive faulting is suggested by the numerous linear to gently curving patterns of some fiords, lakes, and valleys, and by a group of Holocene volcanoes and cinder cones. Two major northwest-striking fault zones are most prominent: (1) the apparently inactive Chichagof-Sitka fault, about 2.5 miles (4.0 km) northeast of Sitka, and {2) part of the active 800-mile- (1,200-km) long Fairweather-Queen Charlotte Islands fault system, lying about 30 miles (48 km) southwest of the city. Many earthquakes have been reported as felt at Sitka since 1832, when good records were first maintained; several shocks were very strong, but none of them caused severe damage. The closest major earthquake (magnitude about 7.3) causing some damage to the city occurred July 30, 1972, and had an epicenter about 30 miles (48 km) to the southwest. Movement along the Fairweather-Queen Charlotte Islands fault system apparently caused most of the earthquakes felt at Sitka. The probability of destructive earthquakes at Sitka is unknown. The tectonics of the region and the seismic record suggest that sometime in the future an earthquake of a magnitude of about 8 and related to the Fairweather-Queen Charlotte Islands fault system probably will occur in or near the area. Effects from some nearby major earthquakes could cause substantial damage at Sitka. Eight possible effects are as follows: 1. Sudden dis

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lynn A. Yehle. 1974. Reconnaissance engineering geology of Sitka and vicinity, Alaska, with emphasis on evaluation of earthquake and other geologic hazards. https://doi.org/10.3133/ofr7453

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗

Special Contributing Area Loading Program user’s manual

Information on the Special Contributing Area Loading Program execution and functions are presented in this user’s manual. An appendix presents a potential improvement for the user to consider. The hydrologic routing simulation method to model flow through multiple reservoirs, or sewer system components, is described. The use of Special Contributing Areas is described to run a successful simulation, which includes user input of hydrologic time series of flow components and the necessary formats. Upon completion of a successful Special Contributing Area Loading Program simulation, the program outputs hydrologic time series and a descriptive text file containing the model results for each defined sub-unit, or Special Contributing Area. The output time series contain flows through, and overflows from, the three reservoirs in the series, and the text file contains input and output path locations.

Open-File Report↗

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report↗