Search USGS⌕ Search

USGS · ofr20231077

Applying intrinsic potential models to evaluate salmon (Oncorhynchus spp.) introduction into main-stem and tributary habitats upstream from the Skagit River Hydroelectric Project, northern Washington

Abstract

We assessed habitat suitability for salmonids across selected tributaries upstream from three hydroelectric dams on the upper Skagit River in Whatcom County, northern Washington. We used NetMap, a commercial toolset within the ArcMap geographic information system (GIS), to analyze stream attributes based upon a synthetic stream channel network derived from digital elevation models. The GIS-derived stream attributes—including gradient, bankfull width, valley width index, elevation, and stream flow—allowed us to examine the spatial distribution and relative quality of spawning and rearing habitat for salmonids based on existing intrinsic potential (IP) models. As a first step, we created maps of potential anadromous fish distribution by identifying potential migration barriers within the synthetic stream network. Next, we applied a suite of existing IP models for steelhead, coho, and Chinook salmon ( Oncorhynchus mykiss , O. kisutch , and O. tshawytscha , respectively) to estimate low, medium, and high IP habitat for each species. Three different IP models were used for each species, based on species preference curves from populations from coastal Oregon, northern California, Alaska, and western Washington. We found that at least 25 tributaries that were greater than third order and contained habitat with the potential for anadromous fish, totaling about 470 river kilometers in 4,453 synthetic stream reaches averaging about 100 meters (m) in length. The IP of each of these reaches was calculated and placed into low, medium, and high IP categories. For Chinook salmon, the only stream with significantly (in other words, greater than 1 kilometer [km]) high IP reaches was the upper Skagit River upstream from Ross Lake reservoir in Canada, upstream from the third dam in the hydroelectric system. There were differences among the three models evaluated, with the model derived for the lower Skagit River showing more high and medium IP habitat than the other two models that were designed for the Columbia River Basin. For coho salmon, all three models showed similar results favoring medium IP over low and high IP habitat. Of the 3 species examined with existing IP models, steelhead had the most habitat rated as high IP with 19 targeted tributaries showing greater than 1 km of high intrinsic potential habitat.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 48.3° to 49.3° latitude; -121.3° to -120.3° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Jeffrey J. Duda, Jill M. Hardiman. 2023-12-18. Applying intrinsic potential models to evaluate salmon (Oncorhynchus spp.) introduction into main-stem and tributary habitats upstream from the Skagit River Hydroelectric Project, northern Washington. https://doi.org/10.3133/ofr20231077

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗