Search USGSSearch

USGS · ofr20161143

Occurrence and distribution of arsenic and radon in water from private wells in the Rancocas aquifer, southern New Castle and northern Kent Counties, Delaware, 2015

Abstract

Water samples were collected and analyzed for arsenic and radon from 36 private, mostly domestic wells that tap the Rancocas aquifer in southern New Castle and northern Kent Counties, Delaware, during the summer of 2015. Both arsenic and radon are from natural mineral sources, in particular glauconitic and other marine-derived sediments, which are important components of the geologic formations comprising the Rancocas aquifer. Routine testing of domestic wells is not required in Delaware; as a result, many homeowners are not aware of potential water-quality problems with these chemicals in their well water. Arsenic has previously been detected at levels of potential concern for human health in this aquifer in adjacent parts of Maryland where it is referred to as the Aquia aquifer. Arsenic and radon also have previously been detected in several Rancocas aquifer wells in Delaware. The Delaware Department of Natural Resources and Environmental Control intends to use the data from this project to better identify areas with potential for levels of concern for domestic well owners. This report includes chemical results and maps showing the distribution of sampled wells and concentrations of arsenic and radon. All data collected for this study also are available in the U.S. Geological Survey’s National Water Information System database. Arsenic was detected above the minimum reporting limit of 0.1 micrograms per liter (µg/L) in 34 of the 36 wells sampled with concentrations ranging from about 0.11 to 27 µg/L. In 15 of the samples, arsenic concentrations were at or above the U.S. Environmental Protection Agency (EPA) Maximum Contaminant Level (MCL) of 10 µg/L for public wells. Most of the higher concentrations are clustered along a band running from the southwest to northeast in the southern part of the study area. Radon, which is an inert gas derived from radium, was detected in all water samples with concentrations ranging from 85 to 1,870 picocuries per liter (pCi/L). Currently, the EPA has not set a MCL for radon in public water systems. There were no samples where radon was detected at a concentration exceeding the proposed alternative MCL of 4,000 pCi/L. Samples from 16 of 36 wells were above the lower proposed MCL of 300 pCi/L. Most of these samples were from wells greater than 200 feet deep located in a similar part of the aquifer as the higher concentrations of arsenic along an east-northeasterly line in the southern part of the study area.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 39.298705113102244° to 39.51834388059882° latitude; -75.77888488769531° to -75.43624877929688° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Judith M. Denver. 2016-10-12. Occurrence and distribution of arsenic and radon in water from private wells in the Rancocas aquifer, southern New Castle and northern Kent Counties, Delaware, 2015. https://doi.org/10.3133/ofr20161143

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Special Contributing Area Loading Program user’s manual

Information on the Special Contributing Area Loading Program execution and functions are presented in this user’s manual. An appendix presents a potential improvement for the user to consider. The hydrologic routing simulation method to model flow through multiple reservoirs, or sewer system components, is described. The use of Special Contributing Areas is described to run a successful simulation, which includes user input of hydrologic time series of flow components and the necessary formats. Upon completion of a successful Special Contributing Area Loading Program simulation, the program outputs hydrologic time series and a descriptive text file containing the model results for each defined sub-unit, or Special Contributing Area. The output time series contain flows through, and overflows from, the three reservoirs in the series, and the text file contains input and output path locations.

Open-File Report

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region