Evaluation of aquifer interconnection from aquifer characteristics computed by using specific capacity data within the vicinity of the Tremont Barrel Fill site, Clark County, Ohio

Amy M. Gahala

doi:10.3133/ofr20151026

Home/Archive/USGS

USGS · ofr20151026

Evaluation of aquifer interconnection from aquifer characteristics computed by using specific capacity data within the vicinity of the Tremont Barrel Fill site, Clark County, Ohio

Amy M. Gahala

View original source ↗Read source document ↗Export metadata ↓

Abstract

The Tremont Barrel Fill site is immediately north of the Tremont City Landfill near Tremont City, Clark County, Ohio. The site was an unlined pit used as a repository for disposing industrial liquid wastes and sludge from 1976 through 1979. Previous investigations led the U.S. Environmental Protection Agency (USEPA) to conclude that the site poses a contamination risk to nearby residents relying on private supply wells opened to the underlying deep sand and gravel and limestone aquifers. The USEPA also concluded there is a potential risk to the residents of the nearby Tremont City; the city obtains its municipal water supply from the Mad River Valley aquifer, which is recharged by the adjacent limestone aquifer. The U.S. Geological Survey (USGS) assessed the degree of hydraulic interconnection, and thus possible contaminant pathway(s), between the two aquifers (the sand and gravel and the limestone) underlying the Barrel Fill site, with consideration for the impact of an identified interconnection between the limestone and the Mad River Valley aquifer used for municipal supply. Aquifer interconnection between the sand and gravel aquifer overlying the limestone aquifer is assessed by analysis of specific capacity data from well-construction logs for derivation of estimates of transmissivity (T) and horizontal hydraulic conductivity (K h ). Data of this nature is limited in the control or knowledge about how well these data were collected and reported; therefore, the T and K h are estimations. Similar values of T and K h are used to infer the degree of aquifer interconnection based on the USEPA Hazard Ranking System, which states that aquifers are considered interconnected when the hydraulic conductivities are within two orders of magnitude. The results of the hydraulic analysis from 127 wells open to either the sand and gravel or the limestone aquifer indicate that the transmissivity of these aquifers is within one order of magnitude and horizontal hydraulic conductivity is within two orders of magnitude. As such, on the basis of the applied ranking system the two aquifers can be considered hydraulically interconnected.

Explore related subjects

Open-File Report Report

Source-reported bounding extent: 39.839122664473194° to 40.00552775916049° latitude; -83.96987915039061° to -83.6334228515625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Amy M. Gahala. 2015. Evaluation of aquifer interconnection from aquifer characteristics computed by using specific capacity data within the vicinity of the Tremont Barrel Fill site, Clark County, Ohio. https://doi.org/10.3133/ofr20151026

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report↗

USGS2026

End-user needs for remote sensing wetlands of the Prairie Pothole Region of North America

The Prairie Pothole Region (PPR) of North America comprises globally important grassland and wetland ecosystems critical for numerous populations of migratory birds. Due to the importance of this region for migratory birds, and particularly waterfowl, and the threats of habitat loss due to intensifying agriculture, there is a mature and diverse system of conservation organizations, agencies, and partnerships that spends hundreds of millions of dollars annually on habitat conservation to support migratory bird populations. Remote sensing can be a powerful tool for observing and evaluating global change at large scales as well as expanding inferences from field studies to the broader landscape with statistical models. However, development and utilization of these tools has lagged behind their demand for several reasons, including concerns over spatial and temporal resolution and accuracy of products; perception of a misalignment with decision-maker needs; technological barriers such as skill sets of conservation professionals, computing resources, data access, and usability. In this report, we summarize the needs of conservation professionals and scientists who use or want to use remote sensing data products to inform science about wetland change and conservation of wetlands in the PPR. We assembled this information through several methods leading up to, during, and following a January 2026 PPR Wetland Remote Sensing Workshop. The workshop included United States and Canadian scientists, conservation professionals, and policy experts. Our goal was to bring together end-users and remote sensing product developers jointly to explore reducing the lag between product development and utilization of products to inform science and conservation. Specifically, we aimed to identify gaps in wetland remote sensing that limit effective monitoring, management, and conservation in the PPR, and to develop a framework that outlines pathways to address these gaps by fostering collaboration, improving communication networks, encouraging discussion, and building on existing and ongoing efforts. This report summarizes our participants’ descriptions of end-user needs and the outcomes of the workshop.

Prairie Pothole region↗

USGS2026

Bathymetric survey and storage capacity of Upper Lake Mary near Flagstaff, Arizona in 2024

The U.S. Geological Survey (USGS), in cooperation with the city of Flagstaff, collected bathymetric, light detection and ranging (lidar), and land-survey data of Upper Lake Mary in Arizona during the months of April and October 2024. The city of Flagstaff uses a combination of groundwater from well fields throughout the Flagstaff area and surface water, mainly from Upper Lake Mary, for its potable water supply. The purpose of the survey is to update previous surveys using new technology and compare the results to previous surveys to determine if there was a decrease in storage capacity that could affect the city’s water supply. The lakebed was mapped in April 2024 using a vessel equipped with a multibeam echosounder (MBES) and mobile lidar scanner with positioning captured using a real-time kinematic global navigation satellite system (RTK GNSS) base and receivers. In October 2024, areas of the reservoir that were too shallow for the boat and shoreline that were not captured by the vessel-based lidar were surveyed on foot using hand-held RTK GNSS receivers. At full pool (spillway elevation of 6,831.82 feet above NAVD 88 [2,082.34 meters (m)], Upper Lake Mary has a storage capacity of 16,449.80 acre-feet (20,290,611.73 cubic meters) and a surface area of 953.57 acres (3,860,926.075 square meters). The reservoir is 5.7 miles (9.7 kilometers) long and varies in width from 326 feet (99.36 m) near the central, narrow portion of the reservoir to 2,613 feet (796.44 m) in the upper portion. Comparisons between this survey and the previous two surveys from the 1950s and 2006 indicate no apparent decrease in reservoir area or storage capacity. Results of the 2024 survey indicate that Upper Lake Mary’s storage capacity increased by 0.9 percent from the 2006 survey and a 1.6 percent increase in surface area from the 2006 survey.

Arizona↗