Search USGSSearch

USGS · fs08800

Use of passive diffusion samplers for monitoring volatile organic compounds in ground water

Abstract

Passive diffusion samplers have been tested at a number of sites where volatile organic compounds (VOC's) are the principal contaminants in ground water. Test results generally show good agreement between concentrations of VOC's in samples collected with diffusion samplers and concentrations in samples collected by purging the water from a well. Diffusion samplers offer several advantages over conventional and low-flow ground-water sampling procedures: * Elimination of the need to purge a well before collecting a sample and to dispose of contaminated water. * Elimination of cross-contamination of samples associated with sampling with non-dedicated pumps or sample delivery tubes. * Reduction in sampling time by as much as 80 percent of that required for 'purge type' sampling methods. * An increase in the frequency and spatial coverage of monitoring at a site because of the associated savings in time and money. The successful use of diffusion samplers depends on the following three primary factors: (1) understanding site conditions and contaminants of interest (defining sample objectives), (2) validating of results of diffusion samplers against more widely acknowledged sampling methods, and (3) applying diffusion samplers in the field.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Philip T. Harte, Michael J. Brayton, Wayne Ives. 2000. Use of passive diffusion samplers for monitoring volatile organic compounds in ground water. https://doi.org/10.3133/fs08800

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction The reports and maps of our Nation’s geological surveys inform and benefit the public, private industry, government officials, and scientists. The use of clear and consistent nomenclature and classifications can improve communication of data and interpretations. Since 1899, the U.S. Geological Survey (USGS) Geologic Names Committee (GNC) has been responsible for defining standards that promote uniform geologic nomenclature and classifications among geoscientists. The GNC periodically publishes a geologic time scale, the “Divisions of Geologic Time,” that serves as the national standard for USGS publications (for example, refer to Orndorff and others, 2023). Authors may use other published geologic time scales, such as those of the Geological Society of America (GSA) or the International Commission on Stratigraphy (ICS), provided that they are clearly specified and referenced. Access to the USGS, GSA, and ICS geologic time scales is also available from the U.S. Geologic Names Lexicon (Geolex) website https://ngmdb.usgs.gov/Geolex/stratres/timescales. The geologic time scale serves a dual purpose by enabling authors to distinguish earth material units by position (chronostratigraphic) and time (geochronologic), as outlined in order of decreasing rank.

Fact Sheet