Search USGS⌕ Search

USGS · 70275050

Seismic intensities, ground motions and basin amplification from the 2022 Mw 6.4 Ferndale, California intraslab earthquake

Abstract

On December 20, 2022, a Mw 6.4 earthquake occurred at a depth of 18 km within the subducting Gorda plate in the Mendocino Triple Junction (MTJ), one of the most seismically active regions of the contiguous United States, causing widespread damage to local communities. Here we document the seismic intensities, ground motions, and basin amplification effects recorded by this earthquake across Humboldt County as part of an ongoing scientific effort to understand subduction zone earthquake hazards. Modified Mercalli Intensity (MMI) values from our post-earthquake field survey report shaking intensities as high as VIII (Severe). Strong ground motion data from 54 seismic stations were processed to calculate amplitude and frequency content parameters across Northern California. The maximum calculated geometric mean PGA and PGV are 1053 cm/s 2 and 52 cm/s (respectively), both recorded within the 3 km deep Eel River sedimentary basin. Comparisons with four published Ground Motion Prediction Equations indicate that PGA and PGV measurements align with expected attenuation-distance patterns for intraslab earthquakes of this nature. Within the Eel River Basin, ground motions for frequencies above 1 Hz are amplified, with respect to reference stations, by factors greater than 2. Our findings suggest that peak ground motions were mainly caused by sedimentary basin site-effects within the Eel River basin, although rupture directivity may have also increased ground motion amplitudes locally. While the Ferndale area is primarily impacted by shallow intraslab earthquakes, our results also raise questions about site-response and basin amplification hazards from a potential megathrust earthquake. The high seismicity rates of the southernmost Cascades call for stronger regional preparedness and improved strategies to mitigate the effects of such a large-scale disaster.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 39.5° to 41° latitude; -124.5° to -123.25° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Leyla Mariam Namazie, Rebecca Medley, Walter D. Mooney. 2025-04-03. Seismic intensities, ground motions and basin amplification from the 2022 Mw 6.4 Ferndale, California intraslab earthquake. https://doi.org/10.1785/0220240338

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related USGS reports

Amploc: A complete Python workflow for amplitude-based locations

Amplitude‐based locations are well suited for characterizing long‐duration seismic sources that may migrate with time, such as debris flows, avalanches, rockfall, and volcanic tremor. Although amplitude‐based location methods have existed for decades, their adoption in real‐time monitoring systems remains limited. We present a complete Python‐based workflow that includes station corrections, amplitude‐based location algorithms, and interactive review tools that are appropriate for real‐time use. The algorithms themselves are not new; however, Amploc integrates several previously published methods into a unified operational framework. The workflow also introduces a browser‐based graphical interface that allows users to review real‐time location results using formats familiar to many observatories. By integrating calibration, location algorithms, and visualization tools, Amploc lowers the barrier to operational use of amplitude‐based locations and improves characterization of phenomena that inform hazard assessments such as long‐period earthquakes, volcanic tremor, and debris flows.

British Columbia, Oregon, Washington↗

Global seasonal microseism intensity and hemispheric asymmetry

Earth’s microseism wavefield dominates seismic background levels at periods between approximately 4 and 20 s, and reflects periodic and secular variations in ocean swell energy. Ocean wave energy couples to the seismic wavefield via distinct primary microseism and secondary microseism (PM and SM) source mechanisms, which are excited by basal swell tractions and seafloor pressure variations due to crossing seas, respectively. This study examines annual amplitude variations for the globally dominant PM (14–20 s) and SM (4–10 s) period bands. Annual harmonic variations are represented by four‐term Fourier series fits to vertical‐component seasonally smoothed acceleration time series from 73 stations in the Global Seismographic and GEOSCOPE networks with over 20 yr of recording and at least 75% data completeness. These annual periodic functions fit between 14%–95% (PM) and 22%–97% (SM) of signal variance. Station annual peak‐to‐peak variations range between 1.2–14.3 dB (PM) and 1.5–20.6 dB (SM). An asymmetry in microseism features exists between the Northern (NH) and Southern (SH) Hemispheres. High‐latitude NH stations show highly correlated PM and SM annual amplitude variations. This character dominates the wider extratropical NH but diminishes at tropical latitudes, and widespread relative PM–SM decorrelation is observed in the SH. These hemispheric characteristics reflect systematic differences in both extratropical storm activity and ocean wave state. Greater annual variation and seasonal predictability in the NH reflect the influence of the large continental landmasses that enhance both storm intensity seasonality and SM‐generating coastal wave reflection. Notable clusters of low PM–SM correlation stations are also observed in continental Antarctica due to seasonal sea ice influences, and in East Asia, reflecting unusual PM and SM source responses to South Asian monsoonal and tropical cyclone ocean wave influences.

Seismological Research Letters↗

Digitizer Suite: The Albuquerque Seismological Laboratory Digitizer Testing Suite

Laboratory testing of digitizers and seismometers helps ensure that prior to deployment the instrumentation can produce high quality data and is operating within specifications. In this work we detail the software package called: the Albuquerque Seismological Laboratory (ASL) Digitizer Test Suite. This Java software package provides several algorithms to verify various performance parameters of digitizers commonly used for recording analog seismic instruments. The goal of these tests is not to be exhaustive, but to identify common failures that could compromise the integrity of seismic data being recorded on the digitizer. For example, Sandia National Laboratories (e.g., Slad and Merchant, 2018) routinely do comprehensive testing of digitizers for various monitoring missions. While these tests reports are valuable for comprehensively characterizing a recording system, it would be resource intensive to conduct such tests on every seismic recorder used in a network. We focus on tests that include ways to estimate the sensitivity, timing, self-noise, and clip-level of the digitizer, as well as the fidelity of the signal being recorded. The software is publicly available and provides a way for the community to verify the integrity of a digitizer using a minimum amount of outside equipment.

Seismological Research Letters↗