Search USGS⌕ Search

USGS · 70273444

Assessment of coastal and fluvial morphodynamic changes using Structure-for-Motion: A case study of the Sfȃntu Gheorghe Mouth (Danube Delta, Romania)

Abstract

The ability to accurately map erosion, flooding, and habitat loss in coastal environments is crucial for formulating national strategies aimed at preventing and mitigating the impacts of natural disasters. A fundamental component of this process is the implementation of coastal morphodynamics monitoring through Structure-from-Motion (SfM) techniques, utilizing high-resolution 2D/3D data obtained from aerial photogrammetry. To assess morphodynamic changes over a three-year period (2022 – 2024), several SfM-based photogrammetric studies were conducted, each year, in the Romanian sector of the Danube-Black Sea coastal zone, specifically at the mouth of one of the Danube River distributaries (Sf Gheorghe branch) into the Black Sea, and along the left bank, near Sf Gheorghe locality, located within the Danube Delta Biosphere Reserve (DDBR). The essential equipment for aerial photogrammetry comprises Unmanned Aerial Vehicles (UAVs) and Global Navigation Satellite Systems (GNSS). In this study, the UAV used was a DJI Mavic 3T (Enterprise/Thermal) drone, complemented by two Trimble R12i and R4 GNSS systems, as well as approximately 10 Ground Control Points (GCPs). Data acquisition and processing were carried out using specialized photogrammetric software (Agisoft Metashape) along with various GIS tools (e.g., Blue Marble Geographics Global Mapper and ESRI ArcMap). The photogrammetric products generated for the study, as detailed in this paper, include Digital Elevation Models (DEMs), Digital Terrain Models (DTMs), orthomosaics (orthophotos), and others. At Sfântu Gheorghe beach, a comparison between 2023 and 2024 photogrammetric surveys revealed that the left bank of the Sf. Gheorghe Arm, at the river mouth into the Black Sea, suffered from a twist (erosion) of up to 64 metres. Additionally, on the selected perimetre (total area of 31,910 square meters ) from the beach and dune zone of Sf. Gheorghe, an area of up to 16,202 square meters was eroded between 2023 and 2024. This contrasts with the period between 2022 and 2023, during which deposition predominated. Erosion at the Danube mouths and the adjacent Black Sea coastline is driven by a complex interaction of natural and anthropogenic factors. Natural processes, including subsidence, sea-level rise, and episodic extreme storm events, contribute significantly to coastal dynamics. Meanwhile, human-induced factors, such as upstream hydrotechnical works that limits sediment transport, cutting of navigation canals, as well as the exacerbating effects of climate change, further accelerate erosion. The recent Structure-from-Motion (SfM) surveys provide essential quantitative data, enabling a detailed analysis of both short-term and long-term morphodynamic changes influenced by seasonal variations and extreme hydrometeorological events in this highly dynamic coastal system.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 44.86262917846662° to 44.932418076703044° latitude; 29.533907040308605° to 29.630386502266845° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Andrei Gabriel Dragos, Gabriel Iordache, Florin Dutu, Monica Palaseanu-Lovejoy, Florin Pitea, Irina Stanciu, Adrian Stanica. 2025-11-05. Assessment of coastal and fluvial morphodynamic changes using Structure-for-Motion: A case study of the Sfȃntu Gheorghe Mouth (Danube Delta, Romania). https://doi.org/10.29227/im-2025-02-03-15

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related USGS reports

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

Stability changes after weak layer collapse: Insights from an unexpected dataset

While conducting avalanche mitigation or traveling through the backcountry, avalanche professionals sometimes experience a "whumpf": a collapse-mode crack accompanied by surface cracking that does not produce an avalanche. These whumpfs are a clear warning sign of instability in the surrounding terrain. But assessing the collapsed slope itself, if it is steep enough to avalanche, carries much more uncertainty. Can slopes that whumpf and are steep enough to slide still avalanche? The answer to this question supports avalanche mitigators and ski guides in assessing whether to open such slopes. Previous research on collapsed slopes is limited to one study conducted before tests that estimate crack propagation propensity, such as the Propagation Saw Test (PST), were developed. This work showed that weak layer shear strength decreased immediately after collapsing and then increased over time. However, no research has examined crack propagation propensity after a whumpf. Studying propagation propensity is key for assessing how whumpfs immediately affect slope stability. To improve our understanding of changes in propagation propensity following weak layer collapse, we conducted PSTs on a test slope in the hours and days after an unexpected collapse occurred on a layer of surface hoar. Two PSTs at our study site three days prior to this collapse provided an estimate of weak layer propagation propensity. PST cut lengths decreased immediately following the collapse, suggesting that the collapse increased the propagation propensity. However, over the next 4-5 hours, PST cut lengths steadily increased at our site, likely due to ongoing sintering and strengthening in the collapsed weak layer. By the end of day two, we were no longer able to initiate propagation, suggesting substantial stabilization of the weak layer. Our results support prior findings and observations suggesting that slopes may remain capable of producing avalanches immediately after a collapse but likely stabilize over the next day or two. Although this research does not provide answers about precisely when a slope becomes stable after a collapse, it does highlight uncertainties in our understanding and interpretation of the stability of slopes that have whumped.

Montana↗