Search USGSSearch

USGS · 70264059

Tracking diagenetic alteration of magnetic susceptibility in thrust ridge and slope basin sediments of the Cascadia margin (ODP Sites 1249 and 1252; IODP Site U1325)

Abstract

We investigated sediment core records from the Cascadia Margin (Ocean Drilling Program Sites 1249 and 1252 at Hydrate Ridge; Integrated Ocean Drilling Program Site U1325 offshore Vancouver Island) using a Zr/Rb heavy mineral proxy from X-ray fluorescence (XRF) core scanning to identify intervals of primary detrital magnetic susceptibility (κ) and predict intervals where diagenesis caused magnetite dissolution by hydrogen sulfide. We also measured total sulfur (TS) content, grain size distributions, total organic carbon (TOC) content, and the magnetic mineral assemblage to further constrain the role of diagenesis on κ. Understanding how κ can be used to better characterize the varied effects of detrital and diagenetic signals in marine settings is important for understanding biogeochemical cycling and records of paleoenvironmental change. The upper 100 m of slope basin Site 1252 contains multiple intervals (> 90 m total) of decreased κ correlated with elevated TS content, consistent with dissolution of magnetite and precipitation of pyrite, iron monosulfides, and/or elemental sulfur. Similarly at the other slope basin site, Site U1325, κ is lower and TS is elevated in the interval between 24 and 51 mbsf, due to sulfide formation. At both slope basin sites, these low κ intervals correspond with high TOC, suggesting the possibility that organoclastic sulfate reduction (OSR) is likely a major driver of diagenetic alteration of κ at these sites. High TS:TOC ratios at Site U1325 suggests anaerobic oxidation of methane (AOM) during sulfate-methane transition zone (SMTZ) migration may have contributed to alteration of κ. In contrast, within the upper 90 m of Site 1249, a methane seep site at the summit of Hydrate Ridge, κ is almost entirely altered by diagenetic processes, with much of the low κ explained by a high degree of iron sulfide formation, while some intervals are affected by precipitation of magnetic iron sulfides that maintain or even increase κ. The presence of abundant methane seepage and gas hydrate as well as chemosynthetic seafloor fauna at this site, suggests that sulfide is released to the water column and AOM, rather than OSR, drives diagenetic alteration of κ at this site. Overall, the slope basin sites show episodic variation of κ that is influenced by TOC content, likely driven by changes in marine primary productivity and sedimentation rate, while the seep site shows consistently altered κ with lower TS content and no correlation with TOC. Methane seep environments likely experience loss of hydrogen sulfide to the water column and oxidation of hydrogen sulfide by seafloor seep fauna, which limits the amount of solid phase sulfur (pyrite, iron monosulfides, elemental sulfur) that can be precipitated within the sediments. In contrast, the migration of a buried SMTZ at slope basin sites results in enhanced sulfur precipitation within the sediments. This integrated magnetic and geochemical approach reveals the diagenetic production pathway and residence time of sulfide with the sediment column ultimately controls the style and degree of diagenetic loss of κ in marine sediments. This approach works best in environments with unaltered reference intervals/sites, consistent magnetic mineralogy, and clay-to-silt grain sizes.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 44° to 50° latitude; -129° to -123° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

BibTeXRIS

Stephen C. Phillips, Joel E. Johnson, William Clyde, Wei-Li Hong, Jacob Setera, Marta E. Torres. 2025. Tracking diagenetic alteration of magnetic susceptibility in thrust ridge and slope basin sediments of the Cascadia margin (ODP Sites 1249 and 1252; IODP Site U1325). https://doi.org/10.1016/j.margeo.2025.107519

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related USGS reports

Mapping the resistivity structure of Walker Ridge 313 in the Gulf of Mexico using the marine CSEM method

A marine controlled source electromagnetic (CSEM) campaign was carried out in the Gulf of Mexico to further develop marine electromagnetic techniques in order to aid the detection and mapping of gas hydrate deposits. Marine CSEM methods are used to obtain an electrical resistivity structure of the subsurface which can indicate the type of substance filling the pore space, such as gas hydrates which are more resistive. Results from the Walker Ridge 313 study (WR 313) are presented in this paper and compared with the Gulf of Mexico Gas Hydrate Joint Industry Project II (JIP2) logging while drilling (LWD) results and available seismic data. The hydrate, known to exist within sheeted sand deposits, is mapped as a resistive region in the two dimensional (2D) CSEM inversion models. This is consistent with the JIP2 LWD resistivity results. CSEM inversions that use seismic horizons provide more realistic results compared to the unconstrained inversions by providing sharp boundaries and architectural control on the location of the resistive and conductive regions in the CSEM model. The seismic horizons include: 1) the base of the gas hydrate stability zone (BGHSZ), 2) the top of salt, and 3) the top and bottom of a fine grained marine mud interval with near vertical hydrate filled fractures, to constrain the CSEM inversion model. The top of salt provides improved location for brines, water saturated salt, and resistive salt. Inversions of the CSEM data map the occurrence of a ‘halo’ of conductive brines above salt. The use of the BGHSZ as a constraint on the inversion helps distinguish between free gas and gas hydrate as well as gas hydrate and water saturated sediments.

Louisiana

Editorial: From cold seeps to hydrothermal vents: Geology, chemistry, microbiology, and ecology in marine and coastal environments

This Research Topic compiles contemporary studies on cold seeps, hydrothermal vents, mud volcanoes, and related seafloor features that are associated with focused fluid emissions and the transfer of carbon, other chemical species, and sometimes heat from the geosphere to the ocean. Because these features sometimes tap fluids and gas originating kilometers below the seafloor, they provide an important window into deep processes that are otherwise inaccessible to scientists. At the shallow portion of their journey, migrating fluids nearing the seafloor contribute to a range of unique biological, physical, and chemical processes within the sediments themselves and at the sediment-water interface. Seafloor fluid emissions play a critical role in global biogeochemical cycles, ocean chemistry, and possibly even climate change. Seafloor leakage points often emit hydrocarbon gases (especially methane and CO 2 ) and are sometimes the loci for deposition of seafloor minerals that have economic value. A burgeoning area of research focuses on natural products generated at these features, seeking compounds with potential pharmaceutical or other applications. Multidisciplinary studies have become routine for characterization of seafloor fluid emission sites, attesting to the inseparability of geologic, physical, chemical, and biological processes in these settings. It is increasingly common for researchers to combine in a single research cruise: subbottom imaging and seafloor mapping; porewater and water column geochemistry and gas sampling; sediment retrieval for lithologic, biostratigraphic, and solid phase analyses; and studies of benthic and subseafloor communities at the microbial to macrofaunal scales. This multidisciplinary approach has the advantage of ensuring the spatial and temporal coincidence of surveys and samples, an important factor at highly dynamic seafloor fluid emission sites. In addition, researchers often use remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), or human-occupied vehicles (HOVs) to record video of the seafloor, compile photomosaics, collect targeted samples, and survey with high-resolution geophysical near-seafloor systems, providing a degree of detail about seafloor fluid emission sites that is unprecedented compared to most areas of the deep ocean. While rarer, long-term cabled observatories or shorter-term deployments of portable observatories are also used at some loci for seafloor fluid flux and are particularly helpful for capturing temporal variations at these dynamic features. Here we summarize the Research Topic’s contribution to multidisciplinary seafloor emission studies in the categories of cold seeps, mud volcanoes, and hydrothermal vents. Figure 1 shows the geographic distribution of the studies in this Research Topic and key features referred to in this Introduction.

Frontiers in Earth Science

Relating systematic molecular and textural properties of graptolite pyrolyzed via gold tube hydrous pyrolysis: Implications for thermal proxies in lower Paleozoic marine shales

A series of gold tube pyrolysis experiments (72 h, 300–550 °C, 50 MPa) conducted on a graptolite-rich lower Paleozoic marine shale generated pyrolysis residues for a comprehensive evaluation of the molecular and structural variability of three types of graptolite periderm. Organic petrology, Raman spectroscopy, and field emission scanning electron microscopy (FE-SEM) with energy dispersive spectroscopy (EDS) were combined to evaluate the thermal evolution process. The three types of graptolite periderm, namely granular, non-granular, and nodular graptolite, were analyzed by Raman spectroscopy wherein point measurements were obtained after the maceral was identified and the location verified by organic petrology. Distinct thermal evolution pathways among non-granular, granular, and nodular graptolite periderms were recorded. The evolution patterns of the Raman parameters, particularly D1 and G bands, highlight the differences in geochemical composition of the graptolite periderm types and the alteration of molecular structure with increasing thermal maturity. Raman parameters D1 (position of the D1 peak), G-FWHM (full width at half maximum of the G peak), and ratios D1-FWHM/G-FWHM (full width at half maximum of the D1 peak ratioed to G-FWHM) and A D1 /A G (ratio of D1 and G peak intensities) showed effectiveness in assessing thermal maturity. Bireflectance with increasing gold tube pyrolysis temperature followed a hierarchy: non-granular > granular > nodular, reflecting different molecular alignment intensities. Qualitative FE-SEM evaluation showed that fine-grained mineral inclusions (primarily Fe-sulfide as determined via EDS) were associated with the graptolite populations, with granular graptolite containing greater amounts of coarser-grained (e.g., ∼300–1400 nm) mineral inclusions relative to non-granular and nodular graptolite, which contain finer-grained (e.g., ∼100–200 nm) inclusions difficult to resolve with optical microscopy. These findings are investigated to highlight the mechanisms that drive organic matter evolution within graptolite during thermal maturation, as well as to explore some of the limitations of using spectroscopic parameters as thermal maturity proxies.

International Journal of Coal Geology