Search USGSSearch

USGS · 70263128

Towards mobile wind measurements using joust configured ultrasonic anemometer for applications in gas flux quantification

Abstract

Small uncrewed aerial systems (sUASs) can be used to quantify emissions of greenhouse and other gases, providing flexibility in quantifying these emissions from a multitude of sources, including oil and gas infrastructure, volcano plumes, wildfire emissions, and natural sources. However, sUAS-based emission estimates are sensitive to the accuracy of wind speed and direction measurements. In this study, we examined how filtering and correcting sUAS-based wind measurements affects data accuracy by comparing data from a miniature ultrasonic anemometer mounted on a sUAS in a joust configuration to highly accurate wind data taken from a nearby eddy covariance flux tower (aka the Tower). These corrections had a small effect on wind speed error, but reduced wind direction errors from 50° to >120° to 20–30°. A concurrent experiment examining the amount of error due to the sUAS and the Tower not being co-located showed that the impact of this separation was 0.16–0.21 ms − 1 "> ms − 1 , a small influence on wind speed errors. Lower wind speed errors were correlated with lower turbulence intensity and higher relative wind speeds. There were also some loose trends in diminished wind direction errors at higher relative wind speeds. Therefore, to improve the quality of sUAS-based wind measurements, our study suggested that flight planning consider optimizing conditions that can lower turbulence intensity and maximize relative wind speeds as well as include post-flight corrections.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 64.4255964928227° to 66.02872959114151° latitude; -152.51844720085307° to -144.20163375461493° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

BibTeXRIS

Derek Hollenbeck, Colin W. Edgar, Eugenie Euskirchen, Kristen L. Manies. 2025-01-26. Towards mobile wind measurements using joust configured ultrasonic anemometer for applications in gas flux quantification. https://doi.org/10.3390/drones9020094

Cite the original work for its findings. Save a collection to share your selection of sources.

Discover connections

Connections use source metadata and explicit phrase matches, not verified experimental comparisons.

KEEP EXPLORING

Related USGS reports

Drone-based radiometric surveys provide high-resolution mine waste characterization

Airborne radiometric surveys use passive geophysical techniques to characterize geochemical variations at or near earth’s surface. These methods have been used for a variety of mapping applications, including mineral resource evaluation. However, detailed characterization of smaller geologic targets, including mine waste features, requires flying at lower altitudes and with tighter line spacing than is feasible with traditional aircraft. Here, a small uncrewed aircraft system (sUAS) equipped with a radiometric sensor was used to acquire high-resolution gamma-spectrometry over small mine waste features and a low-grade stockpile in southwestern New Mexico. The sUAS radiometric system mapped local variability within each survey area and revealed ~2–10 m wide zones where radioelements K, Th, and U may be elevated 2–10× the surrounding material. Additionally, the sUAS radiometric data revealed radioelement variability across survey sites, which correlated reasonably well with variability seen in geochemical samples at each survey site, even though samples collected from individual sites showed high local variability. The sUAS data characterized local heterogeneity within mine waste and other small geologic targets at scales of a few meters to tens of meters, which is not possible with traditional crewed aircraft, and with continuity of coverage that is not possible with ground surveys, thus filling a key gap in geophysical survey spatial resolution.

New Mexico

A methods framework for evaluating measurement consistency across spectrometers for multispectral uncrewed aerial system vegetation mapping applications

The U.S. Geological Survey collects remote sensing data to support national scientific assessments of natural resources, hazards, and landscape change. Spectrometers and spectroradiometers are essential for gathering point-based spectral measurements used in applications such as uncrewed aerial systems (UAS) multispectral image calibration, validation, and analysis. Evaluating how different instruments perform in laboratory and field environments helps determine whether they provide consistent, interoperable measurements. Such verification can expand access to spectral ground data during UAS operations by allowing scientists to use alternative instruments when budgets, logistics, or field conditions limit options. We propose and test a methodological framework for evaluating spectrometers for measurement consistency during UAS multispectral vegetation mapping applications. There are three central evaluation components to the framework: laboratory, field, and relative to UAS multispectral imagery. By evaluating the instruments in both relatively controlled and uncontrolled environments, we thoroughly examine measurement consistency and when/why measurements may differ. We opportunistically selected two instruments for a case study in a coastal marsh setting: a compact laboratory spectrometer we modified for field use and a field-ready spectroradiometer. The instruments produced consistent measurements in both environments. We found differences between the field spectra and UAS spectra that likely reflect the perspectives of ground vs. aerial data and indicate that further radiometric calibration may be needed.

Massachusetts

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York