On the utilization of synthetic and measured earthquake ground motions for designing building monitoring systems in the near-field of major faults

Floriana Petrone; David McCallen; Mehmet Celebi

doi:10.12783/shm2019/32124

Home/Archive/USGS

USGS · 70236884

On the utilization of synthetic and measured earthquake ground motions for designing building monitoring systems in the near-field of major faults

Floriana Petrone·David McCallen·Mehmet Celebi

View original source ↗Export metadata ↓

Abstract

Agencies and research groups engaged in studying measures for enhancing the resiliency of communities have recently placed emphasis on the need for extensive implementation of monitoring systems for rapid post-event assessment of structural integrity. Designing a monitoring system for a building requires a thorough knowledge of its potential nonlinear dynamic behavior with an associated localization of interstory drift. Extending this task across a regional scale becomes even more challenging because of the heterogeneity of the buildings inventory and the limited knowledge of the characteristics of the demand especially for sites located in the near-field of a major fault. The existing observational database of near-field ground motion records is in fact too limited to constitute a comprehensive basis for full understanding of the potential range of structural response variability at different locations near a major fault. In addition, current insight into monitoring system design typically relies on linear structural models and sensors deployed on a limited number of floors. In this context, this paper presents first results of a study that combines synthetic earthquake ground motions generated from a massively parallel regional-scale geophysics wave propagation model at frequencies of engineering interest (0-5 Hz) with nonlinear tall building models. The objective is to gain new insight into the potential impact of localization of nonlinearities in structures subjected to realistic near-field earthquakes and develop a methodology that optimizes the deployment of sensors at the building and site level. In addition to the large database of synthetic motions, available real records are also employed to compare and contrast with the trends observed using synthetic ground motions. Preliminary results confirm a tendency of the demand to localize in specific portions of the structure, especially when nonlinearities occur. The building analyses provide guidance for various sensor deployment configurations associated with different probability of error in measuring structural drifts.

Explore related subjects

Conference Paper

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Floriana Petrone, David McCallen, Mehmet Celebi. 2019-11-15. On the utilization of synthetic and measured earthquake ground motions for designing building monitoring systems in the near-field of major faults. https://doi.org/10.12783/shm2019%2F32124

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

USGS2026

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

USGS2026

Rapid deglaciation of the Tuolumne Meadows region linked to glacier hypsometry

During the LGM deglaciation (19–11 ka), episodes of glacier retreat and stabilization in the western United States are often attributed to abrupt climate change events via changes in Atlantic Meridional Overturning Circulation (e.g., Becker et al. 2025; McGee et al. 2018; Phillips 2016). However, there is considerable variability in the magnitude and timing of glacier retreat across the western US that is difficult to reconcile with a uniform climate forcing (Marcott et al. 2019), indicating either heterogeneous climate change or the influence of local non-climatic variables, such as glacier hypsometry (Young et al. 2011). Prior work from basal lake radiocarbon ages (Gillespie and Clark 2011) and cosmogenic nuclide dating (Phillips 2016; Phillips et al. 2009; Rood et al. 2011) established that Sierra Nevada glaciers receded from LGM moraines to north-facing cirques between 18 and 15 ka, with most deglaciation occurring at 15.8 ± 0.5 ka. As discussed above, geomorphic evidence supports abrupt glacier stagnation and in situ melting in the Tuolumne Meadows region.

Calfiornia↗