Borehole geophysical investigations in the south Texas uranium district

Abstract

Contrasts of electrical properties between uranium deposits and their host rocks in South Texas are subtle. In places where deposits are small or deep, conventional geophysical well-logging techniques and hole-to-hole measurements may be the only practical method to detect changes in rock properties associated with the occurrence of uranium ore deposits. Two separate ore-producing areas in South Texas were chosen for studying borehole geophysical techniques applied to uranium-exploration problems. Extensive measurements of physical properties were made on cores and taken from holes where electrical-resistivity, induced-polarization and gamam-ray logs were run. These analyses show that: (1) induced-polarization anomalies are caused by a change in pyrite content and clay-sized material content and (2) resistivity anomalies are associated with a change in clay-sized material content and cementation. In addition to conventional borehole techniques, hole-to-hole induced-polarization and resistivity tests were made in South Texas. These measurements were made by placing a current source down one hole and a receiver cable down an adjacent hole whose separation ranged from 30 to 300 m and hole depths varied from 80 to 270 m. These tests show that hole-to-hole measurements can be used to detect changes in physical properties, associated with uranium ore, that occur between boreholes. Hole-to-hole measurements provide a link between surface measurements and well logs and can minimize the amount of drilling needed to locate an ore deposit. Accordingly, borehole geophysics will become an increasingly important evaluation tool as mineral exploration goes deeper.