Search USGS⌕ Search
Home/Archive/USGS

USGS · 70201692

Regional map of the 0.70 psi/ft pressure gradient and development of the regional geopressure-gradient model for the onshore and offshore Gulf of Mexico basin, USA

Lauri A. Burke·Scott A. Kinney·Russell F. Dubiel·Janet K. Pitman
View original source ↗Read source document ↗Export metadata ↓

Abstract

Characterization of the regional pressure system in the Gulf of Mexico basin is critical for assessing the occurrence of undiscovered petroleum resources, evaluating areas with potential pressure-related production, identifying potential pressure-related geohazard issues, evaluating hydrocarbon reservoir-seal integrity, and determining the feasibility of geological sequestration and long-term containment of fluids.

Explore related subjects

GCAGS JournalArticle
90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 28.091366281406945° to 31.615965936476076° latitude; -93.55957031249999° to -87.4072265625° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Lauri A. Burke, Scott A. Kinney, Russell F. Dubiel, Janet K. Pitman. 2012. Regional map of the 0.70 psi/ft pressure gradient and development of the regional geopressure-gradient model for the onshore and offshore Gulf of Mexico basin, USA. https://pubs.usgs.gov/publication/70201692

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2025

Geologic models underpinning the 2024 U.S. Geological Survey assessment of undiscovered oil and gas resources in the Hosston and Travis Peak Formations of the onshore Gulf Coast region, U.S.A.

The Early Cretaceous (Berriasian–Hauterivian) Hosston Formation in Louisiana and eastward is time correlative to the Travis Peak Formation of Texas and southern Arkansas. The formation is a first-order clastic sequence with a regional carbonate transgressive surface as an upper contact. The Hosston and Travis Peak formations contain conventional natural gas and oil accumulations that have been produced for nearly a century. These mature reservoirs contain terrigenous fluvial-deltaic, shore-zone, and paralic deposits across the productive trend; organic-lean mudstone and siltstone lithologies are found outboard of the Lower Cretaceous shelf margin. Producing reservoirs exhibit normal pressure gradients from 0.43 to 0.55 psi/ft (9.7 to 12.4 kpa/m), depths from 4000 to over 20,000 ft (1220 to 6100 m), and temperatures from 150 to 385°F (65 to 196°C). Wells are primarily vertical completions. The number of new field wildcats has been declining since the late 1990s. This paper presents comprehensive geologic models, which include lithofacies maps, structure and isopach maps, burial history models, regional seismic interpretations, and events charts that underpin the recently completed U.S. Geological Survey assessment of undiscovered, technically recoverable hydrocarbons within the Hosston and Travis Peak formations. This study also provides geographic and stratigraphic distributions of Hosston–Travis Peak reservoir properties, including geopressure, reservoir temperature, porosity, permeability, API gravity, and gas-oil ratios. Results indicate estimated undiscovered, technically recoverable mean resources of 28 million barrels of oil and 35.8 trillion cubic ft of gas in conventional and continuous accumulations within the Lower Cretaceous Hosston and Travis Peak formations of the onshore U.S. Gulf Coast region. Quantitative assessment results are detailed in U.S. Geological Survey Fact Sheet 2025–3021 and associated Data Release.

GCAGS Journal↗
USGS2021

Quantitative modeling of secondary migration: Understanding the origin of natural gas charge of the Haynesville Formation in the Sabine Uplift area of Louisiana and Texas

The Upper Jurassic (Kimmeridgian) mudstones of the Haynesville Formation in the Sabine Uplift, Louisiana and Texas, are widely considered to be a self-sourced natural gas reservoir; however, additional sources of gas may have charged the mudstones in the Louisiana portion of the uplift. Secondary migration of hydrocarbons into the Sabine Uplift from downdip, gas-generating Jurassic source rocks in the North Louisiana Salt Basin was quantitively modeled in this study. Jurassic source rocks include the Smackover, Haynesville, and Bossier Formations. Thermodynamic equations of state were used to determine thermophysical properties of supercritical methane and water under reservoir conditions. A time-dependent derivation of Darcy’s Law for pressure-driven laminar fluid flow through porous media was used to model secondary migration at reservoir conditions. This study indicates secondary migration requires approximately 100,000 yr for pore fluids to migrate through 1.0 km of carrier beds having representative petrophysical, fluid, and reservoir properties of the Haynesville Formation. As an example migration pathway, the distance from the middle of the North Louisiana Salt Basin to the center of the Sabine Uplift is approximately 96 mi (155 km). Given migration velocities over this distance, 15.5 m.y. is required for hydrocarbons to migrate from the North Louisiana Salt Basin and charge the Haynesville Formation in the Sabine Uplift. This study also indicates supercritical water is 6 times more thermally conductive than methane under reservoir conditions; however, the relatively small volumes of migrated water likely did not transfer sufficient heat for the metagenesis of methane. Based on this study, a component of natural gas charging the Haynesville Formation of the Sabine Uplift area can reasonably be explained by lateral migration and hydrodynamic flow from thermally mature Jurassic source rocks located in adjacent basins.

Louisiana, Texas↗
USGS2018

Methodology for correcting bottomhole temperatures acquired from wireline logging measurements in the onshore U.S. Gulf of Mexico Basin to characterize the thermal regime of total petroleum systems

Characterization of the subsurface thermal regime is critical for understanding many facets of the petroleum system, from thermal maturation of organic-rich source rocks to thermal preservation and non-degradation of hydrocarbon accumulations. On a broad scale, paleo-heatflow has been mapped for the North American continent (Blackwell and Richards, 2004) as well as the contiguous United States (Blackwell et al., 2011). However, in situ reservoir temperature is a fundamental property (Cooper and Jones, 1959) that is difficult to accurately measure in the subsurface (Deming, 1989). Previous work has described the thermal regime of the offshore U.S. Gulf of Mexico Basin (Waples et al., 2004; Forrest et al., 2005; Nagihara and Jones, 2005; Husson et al., 2008); however, due to the lack of an applicable bottomhole temperature (BHT) correction method, virgin rock temperatures of the onshore portion of the basin remains largely uncharacterized in a regional or subregional context. The abundance of BHT measurements offers a useful way to characterize the subsurface thermal environment, provided that they are corrected to reflect the reservoir temperature. This study develops BHT correction methods that are specifically calibrated for the onshore U.S. Gulf of Mexico Basin. These BHT corrections are empirically derived and are based on a newly compiled database of temperatures obtained from BHT wireline measurements and, to a lesser extent, from drill stem test (DST) data. The results of this investigation provide a unified BHT correction methodology for the onshore U.S. Gulf of Mexico Basin as well as provide 12 distinct BHT correction equations for each of the 12 physiographic provinces within the onshore Gulf Coast region. This study also characterizes the geothermal gradient regime across the onshore U.S. Gulf Coast, which ranges from 1.89ºF/100 ft in Sabine Uplift area to 1.39ºF/100 ft in the Southern Louisiana Salt Basin.

Gulf of Mexico Basin↗