Search USGS⌕ Search

USGS · 70199413

Arsenic in southeastern Michigan

Abstract

Arsenic levels exceeding 10 μg/L are present in hundreds of private supply wells distributed over ten counties in eastern and southeastern Michigan. Most of these wells are completed in the Mississippian Marshall Sandstone, the principal bedrock aquifer in the region, or in Pleistocene glacial or Pennsylvanian bedrock aquifers. About 70% of ground water samples taken from more than 100 wells, have arsenic contents ≥10 μg/L with a maximum value of 220 μg/L . Water samples and continuous cores were taken from two test wells. Arsenic content of core samples ranges from <5 to more than 300 ppm, with the highest values found for pyritic black shales. Authigenic cements in the Marshall Sandstone include patchy authigenic pyrite that locally contains arsenic-rich (up to 8.5 wt. % As) domains. Bulk arsenic contents of pyrite-bearing intervals, sampled in well cuttings, are a high as 1020 ppm. Arsenic-rich pyrite is likely the ultimate source of arsenic in eastern and southeastern Michigan ground water, but evidence for pyrite oxidation at depth in bedrock aquifers is generally lacking. Pyrite oxidation may occur or have occurred in tills derived from the Marshall Sandstone and Coldwater Shale, which were found to contain arsenic-rich (up to at least 0.7 wt. % As) iron oxyhydroxides. Plausible mechanisms for widespread arsenic mobilization in eastern and southeastern Michigan ground water include weathering of pyrite in tills, reductive dissolution of iron oxyhydroxides in tills, and potentially, pyrite oxidation in bedrock aquifers, due to drawdown in wells or lowering of water-table levels in response to Pleistocene glaciation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Allan Kolker, Sheridan K. Haack, William F. Cannon, D.B. Westjohn, M.-J. Kim, Laurel G. Woodruff. 2003. Arsenic in southeastern Michigan. https://doi.org/10.1007/0-306-47956-7_10

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Ground failure resulting from earthquake ground motions

The ground failure resulting from an earthquake, at all scales, is ultimately controlled by the details of near-surface earthquake ground motions, the spatially distributed mechanical characteristics of surface materials and how the two interact. This chapter introduces the aspects of ground-motion seismology that are most relevant to the triggering of different types of ground failure, such as landslides and liquefaction. In particular, the chapter focuses on different sources of local modification (e.g. amplification) of earthquake ground motions in the shallow subsurface, known as site effects. The chapter ends with an overview of the controls on, general spatial patterns of, and approaches to regional modelling of the manifestation of ground failure that may be triggered by an earthquake.

Book chapter↗

Loma salmonae and related species

Loma salmonae is a microsporidium that infects Pacific salmon and causes a gill inflammatory syndrome known as microsporidial gill disease of salmon. This disease has been mostly associated with netpen-farmed Chinook salmon ( Oncorhynchus tshawytscha ) in British Columbia, Canada. Clinical, diagnostic, pathological aspects of disease, as well as approaches for disease avoidance in salmon aquaculture are discussed. A laboratory infection model in rainbow trout was used to determine life cycle-stages, transmission dynamics, pathophysiology, influence of temperature, and to test therapeutics applicable to aquaculture. This experimental model has been informative on various approaches of disease control, including the development of a promising vaccine. In addition to improving fish health in salmon farming in North America, this L. salmonae model will be applicable to other microsporidial diseases that may be encountered in emerging aquaculture regions.

Book chapter↗

Cumulative effects of multiple stressors on marine mammals: Elephant seals as a model system

Noise exposure is a potential stressor for free-ranging marine mammals and is often studied in the absence of other environmental factors. Here, a multi-investigator, interdisciplinary effort was undertaken to examine the response of elephant seals to multiple stressors. An integrated physiological and ecological approach was taken, including immunology, stress physiology, toxicology, animal behavior, population biology, and life history theory, to examine the cumulative effects of exposure to multiple stressors in elephant seals. While we measured the response of individual animals, a population response can be predicted by incorporating these results into the long-term data on elephant seal demographics.

Book chapter↗