Composition of dust deposited to snow cover in the Wasatch Range (Utah, USA): Controls on radiative properties of snow cover and comparison to some dust-source sediments

Richard L. Reynolds; Harland L. Goldstein; Bruce M. Moskowitz; Ann C. Bryant; S. McKenzie Skiles; Raymond F. Kokaly; Cody B. Flagg; Kimberly Yauk; Thelma S. Berquo; George N. Breit; Michael Ketterer; Daniel Fernandez; Mark E. Miller; Thomas H. Painter

doi:10.1016/j.aeolia.2013.08.001

USGS · 70187408

Composition of dust deposited to snow cover in the Wasatch Range (Utah, USA): Controls on radiative properties of snow cover and comparison to some dust-source sediments

Richard L. Reynolds·Harland L. Goldstein·Bruce M. Moskowitz·Ann C. Bryant·S. McKenzie Skiles·Raymond F. Kokaly·Cody B. Flagg·Kimberly Yauk·Thelma S. Berquo·George N. Breit·Michael Ketterer·Daniel Fernandez·Mark E. Miller·Thomas H. Painter

View original source ↗Export metadata ↓

Abstract

Dust layers deposited to snow cover of the Wasatch Range (northern Utah) in 2009 and 2010 provide rare samples to determine the relations between their compositions and radiative properties. These studies are required to comprehend and model how such dust-on-snow (DOS) layers affect rates of snow melt through changes in the albedo of snow surfaces. We evaluated several constituents as potential contributors to the absorption of solar radiation indicated by values of absolute reflectance determined from bi-conical reflectance spectroscopy. Ferric oxide minerals and carbonaceous matter appear to be the primary influences on lowering snow-cover albedo. Techniques of reflectance and Mössbauer spectroscopy as well as rock magnetism provide information about the types, amounts, and grain sizes of ferric oxide minerals. Relatively high amounts of ferric oxide, indicated by hard isothermal remanent magnetization (HIRM), are associated with relatively low average reflectance (<0.25) across the visible wavelengths of the electromagnetic spectrum. Mössbauer spectroscopy indicates roughly equal amounts of hematite and goethite, representing about 35% of the total Fe-bearing phases. Nevertheless, goethite (α-FeOOH) is the dominant ferric oxide found by reflectance spectroscopy and thus appears to be the main iron oxide control on absorption of solar radiation. At least some goethite occurs as nano-phase grain coatings less than about 50 nm thick. Relatively high amounts of organic carbon, indicating as much as about 10% organic matter, are also associated with lower reflectance values. The organic matter, although not fully characterized by type, correlates strongly with metals (e.g., Cu, Pb, As, Cd, Mo, Zn) derived from distal urban and industrial settings, probably including mining and smelting sites. This relation suggests anthropogenic sources for at least some of the carbonaceous matter, such as emissions from transportation and industrial activities. The composition of the DOS samples can be compared with sediments in a likely dust-source setting at the Milford Flat Fire (MFF) area about 225 km southwest of Salt Lake City. The MFF area represents geologically and physiographically similar and widespread dust sources west-southwest of the Wasatch Range and heavily populated Wasatch Front. The DOS layers and MFF sediments are similar in some textural, chemical, and magnetic properties, as well as in the common presence of goethite, hematite, magnetite-bearing basalt fragments, quartz, plagioclase, illite, and kaolinite. Textural and some chemical differences among these deposits can be explained by atmospheric sorting as well as by inputs from other settings, such as salt-crusted playas and contaminant sources.

Explore related subjects

Aeolian Research Article

Source-reported bounding extent: 40.233411907115055° to 40.93011520598305° latitude; -112.20886230468749° to -111.59912109375° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Richard L. Reynolds, Harland L. Goldstein, Bruce M. Moskowitz, Ann C. Bryant, S. McKenzie Skiles, Raymond F. Kokaly, Cody B. Flagg, Kimberly Yauk, Thelma S. Berquo, George N. Breit, Michael Ketterer, Daniel Fernandez, Mark E. Miller, Thomas H. Painter. 2014. Composition of dust deposited to snow cover in the Wasatch Range (Utah, USA): Controls on radiative properties of snow cover and comparison to some dust-source sediments. https://doi.org/10.1016/j.aeolia.2013.08.001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

The Sand AbrasioN Device for Aeolian Research (SANDAR): A new experimental device for investigating how wind transport affects sand on Earth and Mars

On Earth and Mars, aeolian transport causes sand grains to become abraded, resulting in mineralogic and textural changes. Understanding how sands evolve, or mature, with transport via experimental studies is important for understanding the origins, geologic history, and cycling of sediments, as well as dust production. Previous experimental works have used a variety of methods to simulate aeolian transport in the laboratory, but practical limitations and similitude concerns have limited such research. Here, we present and validate the Sand AbrasioN Device for Aeolian Research (SANDAR), a modified air mill that uses pressurized air to circulate sand around a small abrasion chamber, simulating the effects of aeolian transport. This device is re-circulating to simulate long-distance transport, and it allows for repeated analyses of well-constrained sediment samples, revealing their evolution over time. It is compatible with the grain sizes (74–500 μm) and grain impact velocities (∼0.6–3.7 m/s) typically expected for natural aeolian environments, and is also adaptable for diverse applications simulating different wind conditions. We show that the SANDAR achieves similitude of kinetic energy with respect to saltating sand on both Earth and Mars. SEM and optical microscope imaging reveal that the SANDAR produces microtextures on the surfaces of sand grains similar to those found with natural aeolian transport, demonstrating that it effectively simulates the mechanical effects of aeolian processes. Thus, the SANDAR is a valid tool for use in experimental research to improve our understanding of sedimentary processes across the Solar System.

Aeolian Research↗

USGS2025

Changes in aeolian saltation cloud properties with wind speed and ripples

Aeolian sediment transport shapes landscapes on Earth and other planetary surfaces, yet key uncertainties remain in how the near-bed saltation cloud responds to changing wind and surface conditions. Leveraging recent advances in image-based particle tracking, we conducted wind tunnel experiments using high-speed imaging and Particle Tracking Velocimetry to quantify sand grain trajectories in saturated saltation clouds over both flat and rippled beds. Our open-source PTV workflow resolved particle motions within millimeters of the bed across a range of wind speeds. Supporting previous results, we find that mean particle velocities do not scale linearly with wind speed; instead, changes in particle velocity distributions—including skewness and kurtosis—emerge as wind strength and sediment flux increase. At higher transport rates, distinctions among saltation, reptation, and creep within the particle distribution become more smoothed, suggesting a continuum spectrum of particle behavior rather than discrete transport modes. Our new dataset of particle trajectories over an active rippled bed shows distinctions in particle speed across the aspects. On ripple stoss slopes, fast saltating grains co-occur with slow creeping particles, while lee slopes are depleted of slower grains, consistent with shadowing effects. These observations support a feedback between ripple morphology and near-bed particle trajectories, with implications for how splash events redistribute sediment momentum. This study contributes new high-resolution empirical data that illuminate how saltation cloud structure evolves with wind forcing and bedform development, advancing our understanding of aeolian sediment transport under complex, dynamic conditions.

Aeolian Research↗

USGS2024

Characterizing variability in geochemistry and mineralogy of western US dust sources

Dust events originate from multiple sources in arid and semi-arid regions, making it difficult to quantify source contributions. Dust geochemical/mineralogical composition, if the sources are sufficiently distinct, can be used to quantify the contributions from different sources. To test the viability of using geochemical and mineralogical measurements to separate dust-emitting sites, we used dust samples collected between 2018 and 2020 from ten National Wind Erosion Research Network (NWERN) sites that are representative of western United States (US) dust sources. Dust composition varied seasonally at many of the sites, but within-site variability was smaller than across-site variability, indicating that the geochemical signatures are robust over time. It was not possible to separate all the sites using commonly applied principal component analysis (PCA) and cluster analysis because of overlap in dust geochemistry. However, a linear discriminant analysis (LDA) successfully separated all sites based on their geochemistry, suggesting that LDA may prove useful for separating dust sources that cannot be separated using PCA or other methods. Further, an LDA based on mineralogical data separated most sites using only a limited number of mineral phases that were readily explained by the local geologic setting. Taken together, the geochemical and mineralogical measurements generated distinct signatures of dust emissions across NWERN sites. If expanded to include a broader range of sites across the western US, a library of geochemical and mineralogical data may serve as a basis to track and quantify dust contributions from these sources.

Aeolian Research↗