Search USGS⌕ Search

USGS · 70179765

Using continuous underway isotope measurements to map water residence time in hydrodynamically complex tidal environments

Abstract

Stable isotopes present in water (δ 2 H, δ 18 O) have been used extensively to evaluate hydrological processes on the basis of parameters such as evaporation, precipitation, mixing, and residence time. In estuarine aquatic habitats, residence time (τ) is a major driver of biogeochemical processes, affecting trophic subsidies and conditions in fish-spawning habitats. But τ is highly variable in estuaries, owing to constant changes in river inflows, tides, wind, and water height, all of which combine to affect τ in unpredictable ways. It recently became feasible to measure δ 2 H and δ 18 O continuously, at a high sampling frequency (1 Hz), using diffusion sample introduction into a cavity ring-down spectrometer. To better understand the relationship of τ to biogeochemical processes in a dynamic estuarine system, we continuously measured δ 2 H and δ 18 O, nitrate and water quality parameters, on board a small, high-speed boat (5 to >10 m s –1 ) fitted with a hull-mounted underwater intake. We then calculated τ as is classically done using the isotopic signals of evaporation. The result was high-resolution (∼10 m) maps of residence time, nitrate, and other parameters that showed strong spatial gradients corresponding to geomorphic attributes of the different channels in the area. The mean measured value of τ was 30.5 d, with a range of 0–50 d. We used the measured spatial gradients in both τ and nitrate to calculate whole-ecosystem uptake rates, and the values ranged from 0.006 to 0.039 d –1 . The capability to measure residence time over single tidal cycles in estuaries will be useful for evaluating and further understanding drivers of phytoplankton abundance, resolving differences attributable to mixing and water sources, explicitly calculating biogeochemical rates, and exploring the complex linkages among time-dependent biogeochemical processes in hydrodynamically complex environments such as estuaries.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 38.2225380989223° to 38.37019391098433° latitude; -121.69898986816406° to -121.63650512695312° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Bryan D. Downing, Brian A. Bergamaschi, Carol Kendall, Tamara E. C. Kraus, Kate J. Dennis, Jeffery A. Carter, Travis von Dessonneck. 2016-12-06. Using continuous underway isotope measurements to map water residence time in hydrodynamically complex tidal environments. https://doi.org/10.1021/acs.est.6b05745

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ∼1900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (∼1000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

Environmental Science & Technology↗

Predictions of anthropogenic background PFAS concentrations in soil and relation to bedrock lithology and groundwater quality

Detectable concentrations of per- and polyfluoroalkyl substances (PFAS) have been observed in soils in remote areas and presumably originate from atmospheric deposition. These anthropogenic background concentrations may enable some PFAS to leach to groundwater at levels that exceed regulatory criteria for drinking water. However, anthropogenic background soil concentrations and their connection to groundwater are not well characterized. We developed a boosted regression tree model to predict perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) concentrations in shallow soils across northern New England. Low soil pH was the most important predictor of elevated anthropogenic PFOS and PFOA concentrations in background soils, rather than potential PFAS sources, land use, or population density. Total organic carbon (TOC) was also an important predictor for PFOS soil concentrations. Model predictions indicate that 73% of the shallow soils within Maine, Vermont, and New Hampshire exceed New Hampshire’s Soil Remediation Standard for PFOS (0.5 ng/g) and 41% exceed the PFOA standard (0.4 ng/g). Analysis of soil model results and groundwater data suggests that areas with high soil pH are associated with higher groundwater detection frequencies, illustrating how areas with less retention in soil are, conversely, also areas with potentially greater groundwater vulnerability. Further analysis indicates that groundwater may be more vulnerable in calcareous lithologies.

Maine, New Hampshire, Vermont↗

PFAS mixture composition and internal exposure profiles shape biological responses under field-realistic exposure

Per- and polyfluoroalkyl substances (PFAS) occur as complex mixtures, yet mixture-dependent biological effects under environmentally realistic exposure conditions remain poorly understood. We conducted multiyear (2018, 2019, 2021) continuous-flow, field-based exposures of male fathead minnows ( Pimephales promelas ) using a low-PFAS reference well (REF; sum of measured PFAS (∑PFAS) 0.1–0.2 μg L –1 ) and PFAS-contaminated groundwater from a fire-training area (FTA) at Joint Base Cape Cod, Massachusetts. Dilution treatments enabled separation of concentration and mixture effects. Groundwater from well FTA1 was perfluorooctanesulfonate (PFOS) dominated (∑PFAS 10–31 μg L –1 ), whereas groundwater from well FTA2 had higher concentrations and was enriched in perfluorooctanoate (PFOA) and diverse precursors (∑PFAS ∼ 80 μg L –1 ). Despite comparable plasma ∑PFAS and PFOS in FTA1–100% and FTA2–50% on day-7, cumulative mortality reached approximately 35% in FTA2–50% and 17% in FTA2–100%, and secondary sex trait expression was reduced by approximately 65–80% relative to REF, whereas sperm motility effects were mixture- and time-dependent. Plasma PFAS profiles were dominated by perfluorohexanesulfonate (PFHxS), PFOS, and sulfonamide precursors. Liver transcriptomics from REF-acclimated fish revealed robust disruption of metabolic, mitochondrial, and endocrine pathways that link PFAS mixture chemistry and internal exposure profiles to organismal outcomes, and testis transcriptomics provided complementary insight into reproductive impairment. These results indicate that PFAS mixture composition and internal exposure profiles, including precursor-associated differences, are important determinants of ecotoxicological outcomes under field-realistic conditions.

Massachusetts↗