Search USGSSearch

USGS · 70176227

Geological and geochemical characterization of the Lower Cretaceous Pearsall Formation, Maverick Basin, south Texas: A future shale gas resource?

Abstract

As part of an assessment of undiscovered hydrocarbon resources in the northern Gulf of Mexico onshore Mesozoic section, the U.S. Geological Survey (USGS) evaluated the Lower Cretaceous Pearsall Formation of the Maverick Basin, south Texas, as a potential shale gas resource. Wireline logs were used to determine the stratigraphic distribution of the Pearsall Formation and to select available core and cuttings samples for analytical investigation. Samples used for this study spanned updip to downdip environments in the Maverick Basin, including several from the current shale gas-producing area of the Pearsall Formation. The term shale does not adequately describe any of the Pearsall samples evaluated for this study, which included argillaceous lime wackestones from more proximal marine depositional environments in Maverick County and argillaceous lime mudstones from the distal Lower Cretaceous shelf edge in western Bee County. Most facies in the Pearsall Formation were deposited in oxygenated environments as evidenced by the presence of biota preserved as shell fragments and the near absence of sediment laminae, which is probably caused by bioturbation. Organic material is poorly preserved and primarily consists of type III kerogen (terrestrial) and type IV kerogen (inert solid bitumen), with a minor contribution from type II kerogen (marine) based on petrographic analysis and pyrolysis. Carbonate dominates the mineralogy followed by clays and quartz. The low abundance and broad size distribution of pyrite are consistent with the presence of oxic conditions during sediment deposition. The Pearsall Formation is in the dry gas window of hydrocarbon generation (mean random vitrinite reflectance values, R o = 1.2–2.2%) and contains moderate levels of total organic carbon (average 0.86 wt. %), which primarily resides in the inert solid bitumen. Solid bitumen is interpreted to result from in-situ thermal cracking of liquid hydrocarbon generated from original type II kerogen that was prevented from expulsion and migration by low permeability. The temperature of maximum pyrolysis output ( T max ) is a poor predictor of thermal maturity because the pyrolysis (S2) peaks from Rock-Eval analysis are ill defined. Vitrinite reflectance values are consistent with the dry gas window and are the preferred thermal maturity parameter. A Maverick Basin Pearsall shale gas assessment unit was defined using political and geologic boundaries to denote its spatial extent and was evaluated following established USGS hydrocarbon assessment methodology. The assessment estimated a mean undiscovered technically recoverable natural gas resource of 8.8 tcf of gas and 3.4 and 17.8 tcf of gas at the F95 and F5 fractile confidence levels, respectively. Significant engineering challenges will likely need to be met in determining the correct stimulation and completion combination for the successful future development of undiscovered natural gas resources in the Pearsall Formation.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Paul C. Hackley. 2012. Geological and geochemical characterization of the Lower Cretaceous Pearsall Formation, Maverick Basin, south Texas: A future shale gas resource?. https://doi.org/10.1306/11221111071

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Compression behavior of hydrate-bearing sediments

This work experimentally explores porosity, compressibility, and the ratio of horizontal to vertical effective stress ( K 0 ) in hydrate-bearing sandy silts from Green Canyon Block 955 in the deep-water Gulf of Mexico. The samples have an in situ porosity of 0.38 to 0.40 and a hydrate saturation of more than 80%. The hydrate-bearing sediments are stiffer than the equivalent hydrate-free sediments; the K 0 stress ratio is greater for hydrate-bearing sediments relative to the equivalent hydrate-free sediments. The porosity decreases by 0.01 to 0.02 when the hydrate is dissociated at the in situ effective stress. We interpret that the hydrate in the sediment pores is a viscoelastic material that behaves like a fluid over experimental time scales, yet it cannot escape the sediment skeleton. During compression, the hydrate bears a significant fraction of the applied vertical load and transfers this load laterally, resulting in the apparent increased stiffness and a larger apparent K 0 stress ratio. When dissociation occurs, the load carried by the hydrate is transferred to the sediment skeleton, resulting in further compaction and a decrease in the lateral stress. The viewpoint that the hydrate is a trapped viscous phase provides a mechanism for how stiffness and stress ratio ( K 0 ) are greater when hydrate is present in the porous media. This study provides insight into the initial stress state of hydrate-bearing reservoirs and the geomechanical evolution of these reservoirs during production.

Louisiana

Geologic models underpinning the 2018 US Geological Survey assessment of hydrocarbon resources in the Eagle Ford Group and associated Cenomanian–Turonian strata, United States Gulf Coast, Texas

The availability of new geologic and production data has greatly increased since 2010, when the US Geological Survey (USGS) last assessed undiscovered, technically recoverable oil and gas resources in the Cenomanian–Turonian (CT) Eagle Ford Group (EFG) across Texas. This new information facilitated an updated assessment of undiscovered continuous oil and gas resources in the Eagle Ford and associated CT strata. Literature and USGS research data were used to build the geologic models for the assessment units (AUs). The USGS defined six continuous AUs within the EFG: (1) Eagle Ford Marl Continuous Oil, (2) Eagle Ford Marl Continuous Gas, (3) Submarine Plateau-Karnes Trough Continuous Oil, (4) Submarine Plateau-Karnes Trough Continuous Gas, (5) CT Mudstone Continuous Oil, and (6) CT Mudstone Continuous Gas. An additional AU, the CT Slope Continuous Gas AU, was defined but not quantitatively assessed. The boundaries of these AUs were defined by thickness, lithofacies, thermal maturity, regional geology, and the spatial distribution of productive fairways. The resulting total mean estimates for undiscovered, technically recoverable resources for these six AUs are 8.5 billion bbl of oil and 66 trillion ft 3 of gas. These results for both oil and gas resources are within the top five volumes of previously assessed continuous accumulations in the United States and attest to the importance of the EFG and associated CT strata as a significant source of petroleum well into the future.

Texas

Comprehensive pressure core analysis for hydrate-bearing sediments from Gulf of Mexico Green Canyon Block 955, including assessments of geomechanical viscous behavior and nuclear magnetic resonance permeability

Quantifying the petrophysical and geomechanical properties of gas hydrate reservoirs is essential for understanding the natural hydrate system and predicting gas production behavior for future resource development. Pressure-core analysis tools were used to characterize methane hydrate–bearing sediments recovered from the Gulf of Mexico Green Canyon Block 955, under an international collaboration with The University of Texas and the National Institute of Advanced Industrial Science and Technology. Pressure-core samples were successfully transferred from Austin, Texas to Sapporo, Japan. Index property measurements (grain size, grain density, hydration number, gas composition, thermal conductivity), along with triaxial compression, consolidation, and permeability tests with a nuclear magnetic resonance (NMR) analyzer were conducted. Compression tests at different strain rates confirmed a strain rate dependence for hydrate-bearing sediment, and an equation for predicting strength as a function of hydrate saturation and strain rate is proposed. Compression and swelling indices were obtained from high-effective stress consolidation tests. Furthermore, secondary compression coefficients for hydrate-bearing sediments were obtained, suggesting that hydrate exhibits creeping behavior on timescales of minutes to hours. A relatively high initial permeability of a few millidarcys was confirmed. In addition, the first NMR signal measurement was performed on a hydrate-bearing pressure core to acquire the NMR transverse or spin-spin ( T 2 ) distribution. Results confirm that the Schlumberger Doll Research model and Timur-Coates model predictions underestimate permeability measured directly via fluid flow. Permeability estimated using specific surface values derived from NMR T 2 distributions is in good agreement with flow test results. Finally, an extended Timur-Coates model was proposed and predicts intrinsic permeability with high accuracy.

Texas