Magnitude and frequency of Iowa floods, Part two

Harlan H. Schwob

Home/Archive/USGS

USGS · 70174079

Magnitude and frequency of Iowa floods, Part two

Harlan H. Schwob

View original source ↗Read source document ↗Export metadata ↓

Abstract

Flood records for regular and partial-record gaging stations are contained in the following pages. Each listing contains the station number and name, descriptive paragraphs pertaining to the station, and a listing of the flood peaks available through the 1965 water year. Peaks above a base as well as annual peaks are listed. These provide the data for a partial-duration flood-frequency curve. Most of the material is self-explanatory and needs no discussion. However, a few items may be made clearer by the brief explanation which follows.

Explore related subjects

Iowa Highway Research Board Bulletin Report

Source-reported bounding extent: 40.375501° to 43.50055° latitude; -96.638621° to -90.140061° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Harlan H. Schwob. 1966. Magnitude and frequency of Iowa floods, Part two. https://pubs.usgs.gov/publication/70174079

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS1966

Magnitude and frequency of Iowa floods, part one

Iowa stream-gaging station records at 147 regular gaging stations and partial-record sites were analyzed to produce flood magnitude and frequency relations. An index flood which is the mean annual flood and two composite frequency curves are used to predict the flood-frequency curve for interior streams of the State. The index flood was determined by a multiple correlation. The independent variables found to be significant are size of drainage basin, stream slope, and the normal annual precipitation for the 1931–60 period. The regression equations for two areas were determined—a large central area and a combination of areas in the northeastern and southwestern parts of the State. All three independent variables were used in the central area. Only area and slope were found necessary in the remainder of the State. The ratio to the index flood at selected recurrence intervals was determined from each of the gaging-station flood-frequency curves. The median of the ratios for the long term period (1916–65) is used to define the two composite curves. Maximum flood discharges at gaging stations and miscellaneous sites are tabulated and related to their frequency of occurrence. Together with the analysis previously described they form part one of a two part report. Basic data in the form of flood peak stages and discharges for each year of record at each gaging station are published in part two of the report.

Iowa↗

USGS1957

Drainage areas of Iowa streams

The drainage area of a stream at a specified location ordinarily may be defined as that area, measured in a horizontal plane, which is enclosed by a topographic divide such that direct surface runoff from precipitation would drain by gravity into the river basin above the specified point. One of the most important factors in the hydrologic computation for the design of structures on or over watercourses is the drainage area upstream from the point under consideration. Other hydrologic studies such as low-flow, flood-frequency analyses, rainfall-runoff correlations, stream density, and area-distance make use of this factor as a basic premise for computation. In order that the drainage-area information of the interior streams of Iowa be of uniform accuracy and available to all users of these data, this report has been compiled, and the drainage areas of all streams in excess of 5 square mies are listed. For the larger streams, drainage areas have been determined at numerous intermediate points. As a result of this report much basic background material has been compiled that will he useful in future hydrologic studies of drainage basin characteristics. This publication is limited to the presentation of the drainage-area data for the interior streams of the State. The methods of application of these data to the study of streamflow characteristics, and the design of related structures are properly the function of the design engineer and are not discussed herein.

Iowa↗