Search USGS⌕ Search
Home/Archive/USGS

USGS · 70142992

Strategies to predict metal mobility in surficial mining environments

Kathleen S. Smith
View original source ↗Export metadata ↓

Abstract

This report presents some strategies to predict metal mobility at mining sites. These strategies are based on chemical, physical, and geochemical information about metals and their interactions with the environment. An overview of conceptual models, metal sources, and relative mobility of metals under different geochemical conditions is presented, followed by a discussion of some important physical and chemical properties of metals that affect their mobility, bioavailability, and toxicity. The physical and chemical properties lead into a discussion of the importance of the chemical speciation of metals. Finally, environmental and geochemical processes and geochemical barriers that affect metal speciation are discussed. Some additional concepts and applications are briefly presented at the end of this report.

Explore related subjects

Reviews in Engineering GeologyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Kathleen S. Smith. 2007. Strategies to predict metal mobility in surficial mining environments. https://doi.org/10.1130/2007.4017(03)

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2008

Shallow landslide hazard map of Seattle, Washington

Landslides, particularly debris flows, have long been a significant cause of damage and destruction to people and property in the Puget Sound region. Following the years of 1996 and 1997, the Federal Emergency Management Agency designated Seattle as a “Project Impact” city with the goal of encouraging the city to become more disaster resistant to landslides and other natural hazards. A major recommendation of the Project Impact council was that the city and the U.S. Geological Survey collaborate to produce a landslide hazard map. An exceptional data set archived by the city containing more than 100 yr of landslide data from severe storm events allowed comparison of actual landslide locations with those predicted by slope-stability modeling. We used an infinite-slope analysis, which models slope segments as rigid friction blocks, to estimate the susceptibility of slopes to debris flows, which are water-laden slurries that can form from shallow failures of soil and weathered bedrock and can travel at high velocities down steep slopes. Data used for the analysis consisted of a digital slope map derived from recent light detection and ranging (LiDAR) imagery of Seattle, recent digital geologic mapping of the city, and shear-strength test data for the geologic units found in the surrounding area. The combination of these data layers within a geographic information system (GIS) platform allowed us to create a shallow landslide hazard map for Seattle.

Washington↗
USGS2008

Assessing deep-seated landslide susceptibility using 3-D groundwater and slope-stability analyses, southwestern Seattle, Washington

In Seattle, Washington, deep-seated landslides on bluffs along Puget Sound have historically caused extensive damage to land and structures. These large failures are controlled by three-dimensional (3-D) variations in strength and pore-water pressures. We assess the slope stability of part of southwestern Seattle using a 3-D limit-equilibrium analysis coupled with a 3-D groundwater flow model. Our analyses use a high-resolution digital elevation model (DEM) combined with assignment of strength and hydraulic properties based on geologic units. The hydrogeology of the Seattle area consists of a layer of permeable glacial outwash sand that overlies less permeable glacial lacustrine silty clay. Using a 3-D groundwater model, MODFLOW-2000, we simulate a water table above the less permeable units and calibrate the model to observed conditions. The simulated pore-pressure distribution is then used in a 3-D slope-stability analysis, SCOOPS, to quantify the stability of the coastal bluffs. For wet winter conditions, our analyses predict that the least stable areas are steep hillslopes above Puget Sound, where pore pressures are elevated in the outwash sand. Groundwater flow converges in coastal reentrants, resulting in elevated pore pressures and destabilization of slopes. Regions predicted to be least stable include the areas in or adjacent to three mapped historically active deep-seated landslides. The results of our 3-D analyses differ significantly from a slope map or results from one-dimensional (1-D) analyses.

Washington↗
USGS2008

A prototype system for forecasting landslides in the Seattle, Washington, area

Empirical rainfall thresholds and related information form the basis of a prototype system for forecasting landslides in the Seattle area. The forecasts are tied to four alert levels, and a decision tree guides the use of thresholds to determine the appropriate level. From analysis of historical landslide data, we developed a formula for a cumulative rainfall threshold (CT), P 3 = 88.9 − 0.67 P 15 , defined by rainfall amounts in millimeters during consecutive 3 d (72 h) periods, P 3 , and the 15 d (360 h) period before P 3 , P 15 . The variable CT captures more than 90% of historical events of three or more landslides in 1 d and 3 d periods recorded from 1978 to 2003. However, the low probability of landslide occurrence on a day when the CT is exceeded at one or more rain gauges (8.4%) justifies a low-level of alert for possible landslide occurrence, but it does trigger more vigilant monitoring of rainfall and soil wetness. Exceedance of a rainfall intensity-duration threshold I = 82.73 D −1.13 , for intensity, I (mm/hr), and duration, D (hr), corresponds to a higher probability of landslide occurrence (30%) and forms the basis for issuing warnings of impending, widespread occurrence of landslides. Information about the area of exceedance and soil wetness can be used to increase the certainty of landslide forecasts (probabilities as great as 71%). Automated analysis of real-time rainfall and subsurface water data and digital quantitative precipitation forecasts are needed to fully implement a warning system based on the two thresholds.

Washington↗