Search USGSSearch

USGS · 70048306

Using hydrogeology to identify the source of groundwater to Montezuma Well, a natural spring in central Arizona: part 1

Abstract

Montezuma Well is a natural spring located within a “sinkhole” in the desert environment of the Verde Valley in Central Arizona. It is managed by the National Park Service as part of Montezuma Castle National Monument. Because of increasing development of groundwater in the area, this research was undertaken to better understand the sources of groundwater to Montezuma Well. The use of well logs and geophysics provides details on the geology in the area around Montezuma Well. This includes characterizing the extent and position of a basalt dike that intruded a deep fracture zone. This low permeability barrier forces groundwater to the surface at the Montezuma Well “pool” with sufficient velocity to entrain sand-sized particles from underlying bedrock. Permeable fractures along and above the basalt dike provide conduits that carry deep sourced carbon dioxide to the surface, which can dissolve carbonate minerals along the transport path in response to the added carbon dioxide. At the ground surface, CO 2 degasses, depositing travertine. Geologic cross sections, rock geochemistry, and semi-quantitative groundwater flow modeling provide a hydrogeologic framework that indicates groundwater flow through a karstic limestone at depth (Redwall Limestone) as the most significant source of groundwater to Montezuma Well. Additional groundwater flow from the overlying formations (Verde Formation and Permian Sandstones) is a possibility, but significant flow from these units is not indicated.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 34.644203° to 34.653415° latitude; -111.758051° to -111.747948° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Raymond H. Johnson, Ed H. DeWitt, L. Rick Arnold. 2012-09-04. Using hydrogeology to identify the source of groundwater to Montezuma Well, a natural spring in central Arizona: part 1. https://doi.org/10.1007/s12665-012-1801-1

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences

Interlaboratory comparison of testing hydraulic, elastic, and failure properties in compression: Lessons learned

Many geoscientific problems require us to exploit synergies of experimental and numerical approaches, which in turn lead to questions regarding the significance of experimental details for validation of numerical codes. We report results of an interlaboratory comparison regarding experimental determination of mechanical and hydraulic properties of samples from five rock types, three sandstone varieties with porosities ranging from 5% to 20%, a marble, and a granite. The objective of this study was to build confidence in the participating laboratories’ testing approaches and to establish tractable standards for several physical properties of rocks. We addressed the issue of sample-to-sample variability by investigating the variability of basic physical properties of samples of a particular rock type and by performing repeat tests. Compressive strength of the different rock types spans an order of magnitude and shows close agreement between the laboratories. However, differences among stress–strain relations indicate that the external measurement of axial displacement and the determination of system stiffness require special attention, apparently more so than the external load measurement. Furthermore, post-failure behavior seems to exhibit some machine-dependence. The different methods used for the determination of hydraulic permeability, covering six orders of magnitude for the sample suite, yield differences in absolute values and pressure dependence for some rocks but not for others. The origin of the differences in permeability, in no case exceeding an order of magnitude, correlate with the compressive strength and potentially reflect a convolution of end plug–sample interaction, sample-to-sample variability, heterogeneity on sample scale, and/or anisotropy, the last two aspects are notably not accounted for by the applied evaluation procedures. Our study provides an extensive data set apt for “benchmarking” considerations, be it regarding new laboratory equipment or numerical modeling approaches.

Environmental Earth Sciences

Attenuation of acid rock drainage by stimulating sulfur-reducing bacteria

Iron-sulfide minerals found in shale formations are stable under anaerobic conditions. However, in the presence of oxygen and water, acid-loving chemolithotrophic bacteria can transform the iron-sulfide minerals into a toxic solution of sulfuric acid and dissolved iron and minerals known as acid rock drainage (ARD). The objective of this study was to disrupt chemolithotrophic bacteria responsible for ARD using chemical treatments and to foster an environment favorable for competing microorganisms to attenuate the biologically induced ARD. Chemical treatments were injected into flow-through microcosms consisting of 501 g of pyrite-rich shale pieces inoculated with ARD bacteria. Three treatments were tested in the microcosms: (1) a sodium hydroxide-bleach mix, (2) a sodium lactate solution, and (3) a sodium lactate-soy infant formula mix. The effectiveness of the treatments was assessed by monitoring pH, dissolved iron, and other geochemical constituents in the discharge waters. The optimal treatment was a sequential injection of 1.5 g sodium hydroxide, followed by 0.75 g lactate and 1.5 g soy formula dissolved in 20 mL water. The pH of the discharge water rose to 6.0 within 10 days, dissolved iron concentrations dropped below 1 mg/L, the median alkalinity increased to 98 mg/L CaCO 3 , and sulfur-reducing and slime-producing bacteria populations were stimulated. The ARD attenuating benefits of this treatment were still evident after 231 days. Other treatments provided a number of ARD attenuating effects but were tempered by problems such as high phosphate concentrations, short longevity, or other shortcomings. The results of these laboratory microcosm experiments were promising for the attenuation of ARD. Additional investigations and careful selection of treatment methods will be needed for field application.

Tennessee