Identifying the dynamic characteristics of a dual core-wall and frame building in Chile using aftershocks of the 27 February 2010 (M w =8.8) Maule, Chile, earthquake

Mehmet Çelebi; Mark Sereci; Ruben Boroschek; Rodrigo Carreno; Patricio Bonelli

doi:10.1193/011812eqs012m

Home/Archive/USGS

USGS · 70041881

Identifying the dynamic characteristics of a dual core-wall and frame building in Chile using aftershocks of the 27 February 2010 (M w =8.8) Maule, Chile, earthquake

Mehmet Çelebi·Mark Sereci·Ruben Boroschek·Rodrigo Carreno·Patricio Bonelli

View original source ↗Export metadata ↓

Abstract

Following the 27 February 2010 (M w = 8.8) Offshore Maule, Chile earthquake, a temporary, 16-channel, real-time data streaming array was installed in a recently constructed building in Viña del Mar to capture its responses to aftershocks. The cast-in-place, reinforced concrete building is 16 stories high, with 3 additional basement levels, and has dual system comprising multiple structural walls and perimeter frames. This building was not damaged during the main-shock, but other buildings of similar design in Viña del Mar and other parts of Chile were damaged, although none collapsed. Dynamic characteristics of the building identified from the low-amplitude (PGA of about 2 Gal) response recordings of aftershocks are found to compare well with those determined from modal analyses using a design level FEM model. Distinct “major-axes” translational and torsional fundamental frequencies, as well as frequencies of secondary modes, are identified. Evidence of beating is consistently observed in the response data for each earthquake. Results do not match well with U.S. code formulas.

Explore related subjects

Earthquake Spectra Article

Source-reported bounding extent: -36.5457° to -34.7119° latitude; -72.7899° to -70.326° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Mehmet Çelebi, Mark Sereci, Ruben Boroschek, Rodrigo Carreno, Patricio Bonelli. 2013-11-01. Identifying the dynamic characteristics of a dual core-wall and frame building in Chile using aftershocks of the 27 February 2010 (M w =8.8) Maule, Chile, earthquake. https://doi.org/10.1193/011812eqs012m

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

An examination of the reasons for, and variability of, the differences between response spectra and pseudo response spectra

For many decades, it has been common practice to overlook the differences between response spectra and pseudo response spectra. This practice stems from analyses indicating that the average difference between response spectra and pseudo response spectra is negligible for a viscous damping ratio of 5%, which is near-universally adopted. As others have shown, the differences depend strongly on the damping ratio, earthquake magnitude, and oscillator period, with larger differences for larger damping, smaller magnitudes, and longer periods. To quantify the full statistical distribution of the ratio of the absolute acceleration response spectrum (SA) to the pseudo absolute acceleration response spectrum (PSA), we fit empirical ratios with the generalized gamma distribution. Data for magnitudes from 4.0 to 5.5 give 95% prediction intervals for the ratio of 1.00–1.02 at 1 s and 1.01–2.24 at 10 s for 5% damping. For 30% damping, these intervals increase to 1.14–2.01 at 1 s and 1.62–11.8 at 10 s, respectively. Further, we demonstrate how the shape of the ground-motion Fourier amplitude spectrum interacts with the natural period of the oscillator to control the differences in the response spectra type. Routinely treating the two measures of acceleration response spectra as interchangeable may lead to unacceptable inconsistencies when the response spectra of individual records are important or when larger damping ratios are used, such as in direct displacement-based design. If one must convert between them, the uncertainty of the conversion should be accounted for during analysis.

Earthquake Spectra↗

USGS2026

Accounting for biases in the analysis of building damage data for the 2023 M7.8 Türkiye/Syria earthquake sequence

In the aftermath of a large earthquake, several practical constraints affect the systematic collection of data for assessing building damage. The available data are therefore typically incomplete, frequently missing key information such as the type of construction, age and geographic location. Moreover, the observations often favour certain locations and damage grades. In the absence of robust methods, using such data directly for characterising the building stock or conducting fragility assessments can introduce systematic bias. Using the 2023 M7.8 Türkiye/Syria earthquake sequence as a case study, we propose a statistical model that enables joint inference over the inventory and fragility of the building stock while explicitly accounting for sources of data error and missing information. The results show higher-than-expected vulnerability amongst several building types, particularly mid- and high-rise reinforced concrete buildings, which performed extremely poorly during the 2023 earthquake sequence. The proposed Bayesian framework provides rigorous uncertainty quantification that can be propagated to future applications.

Earthquake Spectra↗

USGS2026

Suite of regional seismic velocity models for the U.S. Atlantic and Gulf Coastal Plains (CPVMv2.0): Incorporating epistemic uncertainty in velocity models

The U.S. Atlantic and Gulf Coastal Plain (CP) sediments are kilometers-thick, low-velocity deposits underlain by high-velocity bedrock that create regional patterns of amplification and attenuation of ground motions. Capturing these effects is challenging because of the limited subsurface information available, particularly the shear wave velocity ( V S ) structure down to bedrock (or assumed reference rock condition) and the associated uncertainties. This paper introduces a new suite of regional velocity models for the CPs, called CPVMv2.0, which builds upon previous efforts integrating geology, V S measurements, and sediment thickness in the region. CPVMv2.0 uses 750 measured V S profiles and identifies nine surficial-geologic-age-based and geography-based groups (with alternative physiographic-province-based subgroupings) to create surface-based median V S profiles. This suite of new models also includes six subsurface-based median profiles developed using geologic age boundaries from depth-dependent stratigraphic sequences extracted from the U.S. Geological Survey National Crustal Model. In addition to quantifying aleatory variability in sediment velocity, weathered-rock velocity, bedrock velocity, and the depth to the top of weathered rock and bedrock, CPVMv2.0 provides alternative profile models that allow for the characterization of the epistemic uncertainty. This is a unique and relevant feature of CPVMv2.0. Our suite of models was validated using measured and estimated fundamental resonant frequencies as well as other V S models in the region. CPVMv2.0 enables the incorporation of crustal velocities (and their associated variability and uncertainty) into physics-based ground-motion simulations in the eastern United States and into the development of new ground-motion models aiming to characterize systematic site effects via V S30 , depths to V S isosurfaces, and/or sediment thickness in the region.

U.S. Atlantic and Gulf Coastal Plains↗