Search USGS⌕ Search

USGS · 70031128

Upper-crustal structure beneath the strait of Georgia, Southwest British Columbia

Abstract

We present a new three-dimensional (3-D) P -wave velocity model for the upper-crustal structure beneath the Strait of Georgia, southwestern British Columbia based on non-linear tomographic inversion of wide-angle seismic refraction data. Our study, part of the Georgia Basin Geohazards Initiative (GBGI) is primarily aimed at mapping the depth of the Cenozoic sedimentary basin and delineating the near-surface crustal faults associated with recent seismic activities (e.g. M = 4.6 in 1997 and M = 5.0 in 1975) in the region. Joint inversion of first-arrival traveltimes from the 1998 Seismic Hazards Investigation in Puget Sound (SHIPS) and the 2002 Georgia Basin experiment provides a high-resolution velocity model of the subsurface to a depth of ∼7 km. In the southcentral Georgia Basin, sedimentary rocks of the Cretaceous Nanaimo Group and early Tertiary rocks have seismic velocities between 3.0 and 5.5 km s −1 . The basin thickness increases from north to south with a maximum thickness of 7 (±1) km (depth to velocities of 5.5 km s −1 ) at the southeast end of the strait. The underlying basement rocks, probably representing the Wrangellia terrane, have velocities of 5.5–6.5 km s −1 with considerable lateral variation. Our tomographic model reveals that the Strait of Georgia is underlain by a fault-bounded block within the central Georgia Basin. It also shows a correlation between microearthquakes and areas of rapid change in basin thickness. The 1997/1975 earthquakes are located near a northeast-trending hinge line where the thicknesses of sedimentary rocks increase rapidly to the southeast. Given its association with instrumentally recorded, moderate sized earthquakes, we infer that the hinge region is cored by an active fault that we informally name the Gabriola Island fault. A northwest-trending, southwest dipping velocity discontinuity along the eastern side of Vancouver Island correlates spatially with the surface expression of the Outer Island fault. The Outer Island fault as mapped in our seismic tomography model is a thrust fault that projects directly into the Lummi Island fault, suggesting that they are related structures forming a fault system that is continuous for nearly 90 km. Together, these inferred thrust faults may account for at least a portion of the basement uplift at the San Juan Islands.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 48.12372121090243° to 49.82465753621065° latitude; -125.77154323039505° to -121.9719039450089° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

R.K. Dash, G.D. Spence, M. Riedel, R.D. Hyndman, T.M. Brocher. 2007. Upper-crustal structure beneath the strait of Georgia, Southwest British Columbia. https://doi.org/10.1111/j.1365-246x.2007.03455.x

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Surface-wave relocation and characterization of the 2024–2025 dyking episode along the Fentale–Dofen segment of the Ethiopian rift

From late-December 2024 to mid-March 2025, a 50-km-long dyke intrusion triggered over 300 earthquakes (magnitude 4 to 5.9) between Fentale and Dofen volcanoes along the Northern Main Ethiopian Rift. Dyke intrusions periodically occur along the Fentale–Dofen magmatic segment and are an expression of ongoing rift extension. Preliminary analyses using interferometric synthetic aperture radar revealed extensive ground deformation (up to 60 cm), which closely matched the temporal and spatial evolution of surface manifestations and earthquake locations from global catalogues. While global catalogues are critical for real-time monitoring, the precision of locations in remote and or sparsely instrumented regions can be low. In this investigation, we present surface-wave relocation results of the dyking episode that began near Fentale volcano in December 2024. We estimate relative locations using differential traveltimes measured from regional-to-teleseismic distance surface-wave observations of earthquakes reported by the U.S. Geological Survey. Relative relocations reduce the initial region of diffuse seismicity to a 50-km-long narrow band bounding the strike of surface manifestations and the zone of maximum surface deformation. We demonstrate the precision of surface-wave relocations over incremental time periods, capturing the progression of dyking from seismic onset through seismic migration and caldera subsidence. Results showcase the utility of surface-wave relocations in the characterization of dyking episodes and provide complementary insights into the current understanding of the Fentale–Dofen volcanic plumbing system.

Geophysical Journal International↗

Subsurface structure across the Tacoma Basin, Washington State, using trans-dimensional Bayesian inversion of fundamental mode spatial autocorrelation data

Spatial autocorrelation (SPAC), the azimuthal average of the normalized cross-correlation between equidistant station pairs deployed in a 2-D array, is widely used to image the subsurface structure. However, the rigorous estimate of subsurface structure and its uncertainties as a function of depth using SPAC data is challenging due to the nonlinear relation between the SPAC data and Earth structure as well as the trade-off between depth and velocity. Additionally, data noise is strongly correlated due to data processing (e.g. filtering, stacking from multiple time segments and azimuthal averaging). Most studies do not account for the correlated noise and fix the ratio of compressional-wave velocity ( V P ) to shear-wave velocity ( V s ) (i.e. V P / V s ratio) and the number of layers, both of which are typically unknown. To address these challenges, we develop a hierarchical trans-dimensional Bayesian inversion of fundamental mode of SPAC data that properly accounts for the correlated data noise, samples the V P / V s ratio and relaxes the number of layers (i.e. model parametrization) to be unknown in the inversion. We further examine the limitation of using only fundamental modes in the inversion. Our synthetic experiments show that the inversion recovers an incorrect model unless we sample the correlated noise and V P / V s ratio in the inversion. The inversion is then applied to SPAC data acquired at 19 sites across the Tacoma basin in Washington State to characterize the V s and the time-averaged V s over 30-m depth ( V s 30 ). Our results show that the V s 30 varies from ∼200 to 800 m s −1 . The V s 30 within the basin is higher in the middle and lower on the east and west sides. We find that these V s 30 values vary with geologic unit. The uncertainties for V s 30 are within 20 m s −1 in average except for the most eastern site TB28. Additionally, the uncertainties are greater for deeper depths beneath most of the sites as the sensitivity decreases as a function of depth. The Vs structure as a function of depth is also complex beneath some sites, possibly because the SPAC curves are affected by higher order Rayleigh modes that are not considered in the inversion. To better constrain the deeper V s structure, V s 30 and/or other average measures of V s over depth, additional constraints from complementary data, such as ellipticity or geologic data are needed. Moreover, our synthetic experiments show that higher order modes can have significant effect in the inversion results, particularly when there is a low-velocity layer.

Washington↗

Refinements to the attenuated propagation of local earthquake shaking (APPLES) ground-motion-based earthquake early warning algorithm

We refined the Attenuated ProPagation of Local Earthquake Shaking (APPLES) ground-motion-based earthquake early warning (EEW) approach, and directly compare APPLES performance with that of the source-characterization-based U.S. ShakeAlert EEW system for a suite of historical earthquakes in the U.S. West Coast and Japan. APPLES is an extension of the Propagation of Local Undamped Motion (PLUM) algorithm in which observed shaking intensity at seismic stations is used to forward-predict intensity distributions to surrounding areas using an attenuation model derived from an intensity prediction equation. We test new configuration options within APPLES, such as using the second highest estimated ground motion rather than the maximum, to better match median ground-motion observations and reduce alerts for small magnitude earthquakes, both of which are key alerting priorities within ShakeAlert. We evaluate these configurations alongside ShakeAlert by comparing the ground-motion estimation accuracy and available warning times relative to station observations and ShakeMap distributions. Our preferred APPLES configuration produces accurate ground-motion estimates and corresponds better with median observations compared to ShakeAlert’s estimates. This preferred configuration substantially reduces alert issuance for M < 5.0 earthquakes compared to the previous APPLES configuration, and alert-release criteria can further restrict alerts to primarily M ≥ 5.5 earthquakes without requiring magnitude estimation. Prioritizing matching median-observed ground motions may reduce APPLES warning times compared to configurations that were tuned to avoid missed alerts (such as those that use the maximum estimated ground motions), which can lead to shorter warning times compared to ShakeAlert for the same alert threshold. However, station-based warning time assessments demonstrate that APPLES can outperform ShakeAlert for high target thresholds. APPLES is a simple, independent EEW approach that may improve the robustness of EEW for the West Coast of the U.S.

California, Oregon, Washington↗