Search USGSSearch

USGS · 70030035

A coupled remote sensing and simplified surface energy balance approach to estimate actual evapotranspiration from irrigated fields

Abstract

Accurate crop performance monitoring and production estimation are critical for timely assessment of the food balance of several countries in the world. Since 2001, the Famine Early Warning Systems Network (FEWS NET) has been monitoring crop performance and relative production using satellite-derived data and simulation models in Africa, Central America, and Afghanistan where ground-based monitoring is limited because of a scarcity of weather stations. The commonly used crop monitoring models are based on a crop water-balance algorithm with inputs from satellite-derived rainfall estimates. These models are useful to monitor rainfed agriculture, but they are ineffective for irrigated areas. This study focused on Afghanistan, where over 80 percent of agricultural production comes from irrigated lands. We developed and implemented a Simplified Surface Energy Balance (SSEB) model to monitor and assess the performance of irrigated agriculture in Afghanistan using a combination of 1-km thermal data and 250m Normalized Difference Vegetation Index (NDVI) data, both from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor. We estimated seasonal actual evapotranspiration (ETa) over a period of six years (2000-2005) for two major irrigated river basins in Afghanistan, the Kabul and the Helmand, by analyzing up to 19 cloud-free thermal and NDVI images from each year. These seasonal ETa estimates were used as relative indicators of year-to-year production magnitude differences. The temporal water-use pattern of the two irrigated basins was indicative of the cropping patterns specific to each region. Our results were comparable to field reports and to estimates based on watershed-wide crop water-balance model results. For example, both methods found that the 2003 seasonal ETa was the highest of all six years. The method also captured water management scenarios where a unique year-to-year variability was identified in addition to water-use differences between upstream and downstream basins. A major advantage of the energy-balance approach is that it can be used to quantify spatial extent of irrigated fields and their water-use dynamics without reference to source of water as opposed to a water-balance model which requires knowledge of both the magnitude and temporal distribution of rainfall and irrigation applied to fields. ?? 2007 by MDPI.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G.B. Senay, Michael Budde, J. P. Verdin, Assefa M. Melesse. 2007-06-15. A coupled remote sensing and simplified surface energy balance approach to estimate actual evapotranspiration from irrigated fields. https://doi.org/10.3390/s7060979

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Landsat surface product validation instrumentation: The BigMAC exercise

Users of Earth remotely sensed optical imagery are increasingly demanding a surface reflectance or surface temperature product instead of the top-of-atmosphere products that have been produced historically. Validating the accuracy of surface products remains a difficult task since it involves assessment across a range of atmospheric profiles, as well as many different land surface types. Thus, standard approaches from the satellite calibration community do not apply and new technologies need to be developed. The Big Multi-Agency Campaign (BigMAC) was developed to assess current technologies that might be used for validation of surface products derived from satellite imagery, with emphasis on Landsat. Conducted in August, 2021, in Brookings, SD, USA, a variety of measurement technologies were fielded and assessed for accuracy, precision, and deployability. Each technology exhibited its strengths and weaknesses. Handheld spectroradiometers are capable of surface reflectance measurements with accuracies in the 0.01 - 0.02 absolute reflectance units, but are expensive to deploy. Unmanned Aircraft System (UAS)-based radiometers have the potential of making measurements with similar accuracy, but are also difficult to deploy. Mirror-based empirical line methods showed improving accuracy potential, but deployment also remains an issue. However, there are inexpensive radiometers designed for long-term autonomous use that exhibited good accuracy and precision, as well as being easy to deploy. Thermal measurement technologies showed accuracy potential in the 1 - 2K range, and some easily deployable instruments are available. Results from BigMAC indicate there are technologies available today to begin making operational surface reflectance/temperature measurements and strong potential for improvements in the future.

Sensors

A real-time fish detection system for partially dewatered fish to support selective fish passage

Recent advances in fish transportation technologies and deep machine learning-based fish classification have created an opportunity for real-time, autonomous fish sorting through a selective passage mechanism. This research presents a case study of a novel application that utilizes deep machine learning to detect partially dewatered fish exiting an Archimedes Screw Fish Lift (ASFL). A MobileNet SSD model was trained on images of partially dewatered fish volitionally passing through an ASFL. Then, this model was integrated with a network video recorder to monitor video from the ASFL. Additional models were also trained using images from a similar fish scanning device to test the feasibility of this approach for fish classification. Open source software and edge computing design principles were employed to ensure that the system is capable of fast data processing. The findings from this research demonstrate that such a system integrated with an ASFL can support real-time fish detection. This research contributes to the goal of automated data collection in a selective fish passage system and presents a viable path towards realizing optical fish sorting.

Michigan

Intercomparison of same-day remote sensing data for measuring winter cover crop biophysical traits

Winter cover crops are planted during the fall to reduce nitrogen losses and soil erosion and improve soil health. Accurate estimations of winter cover crop performance and biophysical traits including biomass and fractional vegetative groundcover support accurate assessment of environmental benefits. We examined the comparability of measurements between ground-based and spaceborne sensors as well as between processing levels (e.g., surface vs. top-of-atmosphere reflectance) in estimating cover crop biophysical traits. This research examined the relationships between SPOT 5, Landsat 7, and WorldView-2 same-day paired satellite imagery and handheld multispectral proximal sensors on two days during the 2012–2013 winter cover crop season. We compared two processing levels from three satellites with spatially aggregated proximal data for red and green spectral bands as well as the normalized difference vegetation index (NDVI). We then compared NDVI estimated fractional green cover to in-situ photographs, and we derived cover crop biomass estimates from NDVI using existing calibration equations. We used slope and intercept contrasts to test whether estimates of biomass and fractional green cover differed statistically between sensors and processing levels. Compared to top-of-atmosphere imagery, surface reflectance imagery were more closely correlated with proximal sensors, with intercepts closer to zero, regression slopes nearer to the 1:1 line, and less variance between measured values. Additionally, surface reflectance NDVI derived from satellites showed strong agreement with passive handheld multispectral proximal sensor-sensor estimated fractional green cover and biomass (adj. R 2 = 0.96 and 0.95; RMSE = 4.76% and 259 kg ha−1, respectively). Although active handheld multispectral proximal sensor-sensor derived fractional green cover and biomass estimates showed high accuracies (R 2 = 0.96 and 0.96, respectively), they also demonstrated large intercept offsets (−25.5 and 4.51, respectively). Our results suggest that many passive multispectral remote sensing platforms may be used interchangeably to assess cover crop biophysical traits whereas SPOT 5 required an adjustment in NDVI intercept. Active sensors may require separate calibrations or intercept correction prior to combination with passive sensor data. Although surface reflectance products were highly correlated with proximal sensors, the standardized cloud mask failed to completely capture cloud shadows in Landsat 7, which dampened the signal of NIR and red bands in shadowed pixels.

Maryland