Characterization and modeling of illite crystal particles and growth mechanisms in a zoned hydrothermal deposit, Lake City, Colorado

D. J. Bove; D. D. Eberl; D.K. McCarty; G.P. Meeker

doi:10.2138/am-2002-11-1204

Home/Archive/USGS

USGS · 70024113

Characterization and modeling of illite crystal particles and growth mechanisms in a zoned hydrothermal deposit, Lake City, Colorado

D. J. Bove·D. D. Eberl·D.K. McCarty·G.P. Meeker

View original source ↗Export metadata ↓

Abstract

Mean thickness measurements and crystal-thickness distributions (CTDs) of illite particles vary systematically with changes in hydrothermal alteration type, fracture density, and attendant mineralization in a large acid-sulfate/Mo-porphyry hydrothermal system at Red Mountain, near Lake City, Colorado. The hydrothermal illites characterize an extensive zone of quartz-sericite-pyrite alteration beneath two deeply rooted bodies of magmatic-related, quartz-alunite altered rock. Nineteen illites from a 3000 ft vertical drill hole were analyzed by XRD using the PVP-10 intercalation method and the computer program MudMaster (Bertaut-Warren-Averbach technique). Mean crystallite thicknesses, as determined from 001 reflections, range from 5-7 nanometers (nm) at depths from 0-1700 ft, then sharply increase to 10-16 nm at depths between 1800-2100 ft, and decrease again to 4-5 nm below this level. The interval of largest particle thickness correlates strongly with the zone of most intense quartz-sericite-pyrite alteration (QSP) and attendant high-density stockwork fracturing, and with the highest concentrations of Mo within the drill core. CTD shapes for the illite particles fall into two main categories: asymptotic and lognormal. The shapes of the CTDs are dependent on conditions of illite formation. The asymptotic CTDs correspond to a nucleation and growth mechanism, whereas surface-controlled growth was the dominant mechanism for the lognormal CTDs. Lognormal CTDs coincide with major through-going fractures or stockwork zones, whereas asymptotic CTDs are present in wallrock distal to these intense fracture zones. The increase in illite particle size and the associated zone of intense QSP alteration and stockwork veining was related by proximity to the dacitic magma(s), which supplied both reactants and heat to the hydrothermal system. However, no changes in illite polytype, which in other studies reflect temperature transitions, were observed within this interval.

Explore related subjects

American Mineralogist Article

Source-reported bounding extent: 37.896530447543° to 38.052416771864834° latitude; -107.40234375° to -107.17163085937499° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

D. J. Bove, D. D. Eberl, D.K. McCarty, G.P. Meeker. 2002-12-01. Characterization and modeling of illite crystal particles and growth mechanisms in a zoned hydrothermal deposit, Lake City, Colorado. https://doi.org/10.2138/am-2002-11-1204

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Complex carbonate ore mineralogy in the Mountain Pass carbonatite rare earth element deposit, USA

Economic concentrations of rare earth element (REE) minerals are uncommon in the Earth’s crust, with most occurring in carbonatites. Unlike most igneous rocks composed of silicate minerals, carbonatites are dominated by carbonate minerals, some of which can incorporate significant light REEs (LREEs; La, Ce, Pr, Nd). Technological applications of REEs are numerous and they have been identified as some of the most critical mineral commodities to the global economy. The Mountain Pass carbonatite stock in the Mojave Desert of California is the most economically significant REE deposit in the USA and contains a few to tens of percent (by volume) of the carbonate REE ore mineral bastnäsite. Despite the economic significance of the Mountain Pass deposit, studies of its ore mineralogy are limited. Here we present new carbonate ore mineralogy data for a compositionally diverse suite of carbonatitic rocks from the Mountain Pass stock and related dikes. Whole-rock geochemical data are integrated with mineral-scale textural and chemical data obtained by scanning electron microscopy (SEM), electron probe microanalysis (EPMA), and microRaman spectroscopy. Our results document a complex spectrum of REE-bearing carbonate minerals and intermediate mixed-layer structures. Mineral species include bastnäsite [REE(CO 3 )F], hydroxylbastnäsite [REE(CO 3 )OH], parisite [Ca(REE) 2 (CO 3 ) 3 F 2 ], synchysite [Ca(REE)(CO 3 ) 2 F], röntgenite [Ca 2 (Ce,La) 3 (CO 3 ) 5 F 3 ], and sahamalite [(Mg,Fe 2+ )(REE) 2 (CO 3 ) 4 ]. Carbonate ore mineralogy is heterogeneous within and between samples, including at the intracrystal scale. Complexly zoned crystals exhibit as many as five to six different compositional domains and syntaxial intergrowths, commonly with the more Ca-rich varieties (parisite, synchysite) forming crystal rims that surround relict bastnäsite cores. We attribute the phenocryst variability to changes in the chemistry and temperature of primary carbonatite magmas and evolved/exsolved fluids. Cross-cutting vein textures of calcite, celestine and various REE carbonate minerals, interstitial bastnäsite crystallization, breccia blocks lined by fine-grained bastnäsite, and the presence of hydroxylbastnäsite and partially hydroxylated bastnäsite point to the role of secondary hydrothermal processes in REE mineralization. Fluorcarbonate mineral compositions demonstrate that La and Ce are more structurally abundant in bastnäsite, whereas the more Ca-rich species (parisite, synchysite) contain a greater proportion of REE heavier than Pr (Nd, Sm, Eu, Gd) and Y. Atomic ratios of Pr/(Nd + Pr) are likewise variable, with the highest average value for bastnäsite (0.25) compared to parisite (0.22) and sychysite (0.21). This finding has geometallurgical implications, given that current mining operations are focused on recovery of Nd and Pr for high field strength permanent magnets and the Nd/Pr ratios are a critical factor in ore processing and magnet manufacture.

California↗

USGS2025

Pre-eruptive characteristics of “suspect” silicic magmas in Carlin-type Au-forming systems

World-class Carlin-type Au deposits hosted in sedimentary rock were formed when profuse Eocene silicic magmatism swept across northern Nevada in response to arc migration. Carlin-type Au deposits formed along with porphyry/skarn Cu-Mo-W-Au deposits, epithermal Ag-Au deposits, and distal disseminated Ag-Au deposits. But unlike these other Au-bearing deposits that have clear associations with igneous intrusions, Carlin-type ore deposits appear to have formed distant from concealed plutons, and their origin remains controversial. Despite decades of abundant geophysical, geochronological, and geochemical studies suggesting the involvement of magmas, concrete evidence for magmatic involvement is still lacking. Consequently, the involvement of contemporaneous igneous systems remains inferred based on age, proximity, and variable isotopic, geochemical, and geophysical clues. A recent synthesis of deposit models postulates that Carlin-type Au deposits are intrusion-related, but that the causative magmas reside deeper (∼6–12 km) than in typical porphyry and peripheral systems (∼3–5 km), meaning that Carlin-type deposits are perhaps more distal expressions of igneous intrusions. We investigate a collection of “suspect” magmatic systems over a ∼7 m.y. timespan (∼41–34 Ma) that are contemporaneous with and near known Carlin-type ore deposits. We report results of a multifaceted array of in situ geochemical analyses (FTIR, EMP, SHRIMP-RG, LA-ICP-MS) of quartz-hosted melt inclusions, biotite, and quartz to better characterize the pre-eruptive characteristics of these magmas. We also report results of thermobarometry and thermodynamic phase equilibria modeling to help place constraints on magmatic reservoir depths and processes. Rather than a single “flavor” of silicic magma, we observe a surprisingly broad compositional spectrum of rhyolites, with one end of the spectrum exhibiting more arc-like (I-type) characteristics and the other end displaying more post-subduction, thick-crust extensional (A-type) characteristics. This broad compositional spectrum suggests a more complex picture of silicic crustal magmatism operating over a narrow span of time during slab rollback. Despite this spectrum, magmatic systems in this study are consistently ferroan and generally peraluminous, which we interpret as an expression of the relatively elevated geotherm at the time and incorporation of variable amounts of highly peraluminous metasedimentary crustal components. The silicic magma spectrum encompasses a range of mineralization associations, including subduction-related Cu-Mo-W-Au-Ag and post-subduction, thick-crust extensional rare-metal Mo-Sn-W-F-Be-Ag-Au, consistent with the prolific and diverse array of ore deposits that formed during this time. Carlin-type Au deposition appears to be associated with nearly the entire magmatic spectrum. This apparent indifference to silicic magma “flavor” would seem to imply that if magmas are involved in Carlin-type Au deposit genesis, they perhaps do not need to be compositionally specialized and/or possibly are only relevant as heat sources driving circulation to remobilize and redistribute metals.

Nevada↗

USGS2025

Wangyanite, PdNi8S8, a new Pd end-member mineral of the pentlandite group from the J-M reef, Stillwater Complex, Montana, USA

Wangyanite (IMA2024-008a), ideally PdNi 8 S 8 , is a Pd end-member mineral of the pentlandite group that was discovered in the J-M reef of the Stillwater Complex, Montana, USA. Wangyanite occurs as anhedral-subhedral granular crystals 200–400 µm in size, associated with isoferroplatinum, braggite, pentlandite, and chalcopyrite interstitial to plagioclase grains within anorthosite. Wangyanite exhibits a yellowish brown color with a black streak and a metallic luster. It is brittle with uneven fractures, and has a calculated density of 5.14 g/cm 3 . The mineral does not show discernible pleochroism, bireflectance, or anisotropy. It has an average composition of 9.95 wt.% Pd, 31.95 wt.% Ni, 25.02 wt.% Fe, 0.57 wt.% Co, 31.74 wt.% S, totaling 99.23 wt.%. The empirical formula, based on eight sulfur atoms per formula unit, is (Pd 0.76 Co 0.08 ) Σ0.84 (Ni 4.39 Fe 3.60 ) Σ7.99 S 8 . Wangyanite has a cubic cell with a space group of Fm -3 m (#225), having lattice parameters of a = 10.1167(12) Å, V = 1035.4(4) Å 3 , and Z = 4. Its crystal structure has been solved by single-crystal three-dimensional electron diffraction study. The strongest X-ray diffraction lines of wangyanite are claculated at [ d in Å ( I %)( hkl )]: 5.841(14.03)(111), 3.050(100)(311), 1.947(29.16)(115,333), 1.264(11.66)(800), 3.577(8.79)(220), 2.920(20.82)(222), and 2.321(9.34)(331). Wangyanite shares the same crystal structure as pentlandite, but the octahedrally coordinated site is mainly occupied by Pd in wangyanite. Based on the textural features and previous experimental Pd-Fe-Ni-S phase system, wangyanite could form by peritectic reaction between braggite, pentlandite and sulfide liquid. These mineral associations are stable in a Ni-Pd-rich sulfide melt system at about 550 °C or even lower temperature. Therefore, wangyanite can potentially serve as an indicator of the presence of Pd-rich residual melts. The mineral is named in honor of Prof. Christina Yan Wang, a well-known researcher on platinum-group element (PGE) occurrences and enrichment mechanisms in mafic-ultramafic intrusions, notably those deposits related to the Emeishan large igneous province in China.

Montana↗