Search USGS⌕ Search

USGS · 70024056

Conceptual uncertainty in crystalline bedrock: Is simple evaluation the only practical approach?

Abstract

A simple evaluation can be used to characterise the capacity of crystalline bedrock to act as a barrier to releases of radionuclides from a nuclear waste repository. Physically plausible bounds on groundwater flow and an effective transport-resistance parameter are estimated based on fundamental principles and idealised models of pore geometry. Application to an intensively characterised site in Sweden shows that, due to high spatial variability and uncertainty regarding properties of transport paths, the uncertainty associated with the geological barrier is too high to allow meaningful discrimination between good and poor performance. Application of more complex (stochastic-continuum and discrete-fracture-network) models does not yield a significant improvement in the resolution of geologic-barrier performance. Comparison with seven other less intensively characterised crystalline study sites in Sweden leads to similar results, raising a question as to what extent the geological barrier function can be characterised by state-of-the art site investigation methods prior to repository construction. A simple evaluation provides a simple and robust practical approach for inclusion in performance assessment.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. Geier, C.I. Voss, B. Dverstorp. 2002. Conceptual uncertainty in crystalline bedrock: Is simple evaluation the only practical approach?. https://pubs.usgs.gov/publication/70024056

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Locally refined block-centered finite-difference groundwater models: Evaluation of parameter sensitivity and the consequences for inverse modelling and predictions

Models with local grid refinement, as often required in groundwater models, pose special problems for model calibration. This work investigates the calculation of sensitivities and performance of regression methods using two existing and one new method of grid refinement. The existing local grid refinement methods considered are (1) a variably spaced grid in which the grid spacing becomes smaller near the area of interest and larger where such detail is not needed and (2) telescopic mesh refinement (TMR), which uses the hydraulic heads or fluxes of a regional model to provide the boundary conditions for a locally refined model. The new method has a feedback between the regional and local grids using shared nodes, and thereby, unlike the TMR methods, balances heads and fluxes at the interfacing boundary. Results for sensitivities are compared for the three methods and the effect of the accuracy of sensitivity calculations are evaluated by comparing inverse modelling results. For the cases tested, results indicate that the inaccuracies of the sensitivities calculated using the TMR approach can cause the inverse model to converge to an incorrect solution.

Acta Universitatis Carolinae, Geologica↗

High-resolution characterization of chemical heterogeneity in an alluvial aquifer

The high-resolution capabilities of direct-push technology were exploited to develop new insights into the hydrochemistry at the margin of an alluvial aquifer. Hydrostratigraphic controls on groundwater flow and contaminant loading were revealed through the combined use of direct-push electrical conductivity (EC) logging and geochemical profiling. Vertical and lateral variations in groundwater chemistry were consistent with sedimentary features indicated by EC logs, and supported a conceptual model of recharge along the floodplain margin.

Acta Universitatis Carolinae, Geologica↗

Evaluation of longitudinal dispersivity estimates from forced-gradient tracer tests in heterogeneous aquifers

Converging radial-flow and two-well tracer tests are simulated in two-dimensional aquifers to investigate the effects of heterogeneity and forced-gradient test configuration on longitudinal dispersivity (??L) estimates, and to compare ??L estimates from forced-gradient tests with ??L values that characterize solute spreading under natural-gradient flow. Results indicate that in mildly heterogeneous aquifers, for tests with relatively large tracer transport distances, ??L estimates from the two test types are generally similar, and are also similar to ??L values determined from natural-gradient tracer simulations. In highly heterogeneous aquifers, ??L estimates from two-well tests are generally larger than those from radial-flow tests, and the ??L estimates from both test types are typically smaller than the ??L values determined from natural-gradient simulations.

Acta Universitatis Carolinae, Geologica↗