Search USGS⌕ Search
Home/Archive/USGS

USGS · 70020548

Geochemical and geochronological constraints on the genesis of Au-Te deposits at Cripple Creek, Colorado

K.D. Kelley·S.B. Romberger·D.W. Beaty·J.A. Pontius·L.W. Snee·H. J. Stein·T.B. Thompson
View original source ↗Export metadata ↓

Abstract

The Cripple Creek district (653 metric tons (t) of Au) consists of Au-Te veins and disseminated gold deposits that are spatially related to alkaline igneous rocks in an Oligocene intrusive complex. Vein paragenesis includes quartz-biotite-K feldspar-fluorite-pyrite followed by base metal sulfides and telluride minerals. Disseminated deposits consist of microcrystalline native gold with pyrite that are associated with zones of pervasive adularia.New 40 Ar/ 39 Ar dates indicate that there was a complex magmatic and hydrothermal history. Relatively felsic rocks (tephriphonolite, trachyandesite, and phonolite) were emplaced into the complex over about 1 m.y., from 32.5 + or - 0.1 (1Sigma ) to 31.5 + or - 0.1 Ma. A younger episode of phonolite emplacement outside of the complex is indicated by an age of 30.9 + or - 0.1 Ma. Field relationships suggest that at least one episode of mafic and ultramafic dike emplacement occurred after relatively more felsic rocks and prior to the main gold mineralizing event. Only a single whole-rock date for mafic phonolite (which indicated a maximum age of 28.7 Ma) was obtained. However, constraints on the timing of mineralization are provided by paragenetically early vein minerals and K feldspar from the disseminated gold pyrite deposits. Early vein minerals (31.3 + or - 0.1-29.6 + or - 0.1 Ma) and K feldspar (29.8 + or - 0.1 Ma) from the Cresson disseminated deposit, together with potassically altered phonolite adjacent to the Pharmacist vein (28.8 and 28.2 + 0.1 Ma), suggest there was a protracted history of hydrothermal activity that began during the waning stages of phonolite and early mafic-ultramafic activity and continued, perhaps intermittently, for at least 2 m.y.Estimated whole-rock delta 18 O values of the alkaline igneous rocks range from 6.4 to 8.2 per mil. K feldspar and albite separates from igneous rocks have lead isotope compositions of 206 Pb/ 204 Pb = 17.90 to 18.10, 207 Pb/ 204 Pb = 15.51 to 15.53, and 208 Pb/ 204 Pb = 38.35 to 38.56. These isotopic compositions, together with major and trace element data, indicate that the phonolitic magmas probably evolved by fractional crystallization of an alkali basalt that assimilated lower crustal material. Upper crustal contamination of the magmas was not significant The 206 Pb/ 204 Pb compositions of vein galenas almost entirely overlap those of phonolites suggesting a genetic relationship between alkaline magmatism and mineralization. However, a trend toward higher 207 Pb/ 204 Pb (15.57-15.60) and a 208 Pb/ 204 Pb ratios (38.94-39.48) of some galenas suggests a contribution to the ore fluid from surrounding Early Proterozoic rocks, probably through leaching by mineralizing fluids. Limited stable isotope compositions of quartz, K feldspar, and biotite from this and previous studies support a largely magmatic origin for the early vein fluids.It is suggested that three features were collectively responsible for generating alkaline magmas and associated mineral deposits: (1) the timing of magmatism and mineralization, which coincided with the transition between subduction-related compression and extension related to continental rifting; (2) the location of Cripple Creek at the junction of four major Precambrian units and at the intersection of major northeast-trending regional structures with northwest-trending faults, which served as conduits for magmas and subsequent hydrothermal fluids; and (3) the complex magmatic history which included emplacement of relatively felsic magmas followed by successively more mafic magmas with time.

Explore related subjects

Economic GeologyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

K.D. Kelley, S.B. Romberger, D.W. Beaty, J.A. Pontius, L.W. Snee, H. J. Stein, T.B. Thompson. 1998-11-01. Geochemical and geochronological constraints on the genesis of Au-Te deposits at Cripple Creek, Colorado. https://doi.org/10.2113/gsecongeo.93.7.981

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗
USGS2025

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico↗
USGS2025

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology↗