Identification of groundwater parameters at Columbus, Mississippi, using a 3D inverse flow and transport model

H.C. Barlebo; D. Rosbjerg; M. C. Hill

Home/Archive/USGS

USGS · 70018603

Identification of groundwater parameters at Columbus, Mississippi, using a 3D inverse flow and transport model

H.C. Barlebo·D. Rosbjerg·M. C. Hill

View original source ↗Export metadata ↓

Abstract

An extensive amount of data including hydraulic heads, hydraulic conductivities and concentrations of several solutes from controlled injections have been collected during the MADE 1 and MADE 2 experiments at a heterogeneous site near Columbus, Mississippi. In this paper the use of three-dimensional inverse groundwater models including simultaneous estimation of flow and transport parameters is proposed to help identify the dominant characteristics at the site. Simulations show that using a hydraulic conductivity distribution obtained from 2187 borehole flowmeter tests directly in the model produces poor matches to the measured hydraulic heads and tritium concentrations. Alternatively, time averaged hydraulic head maps are used to define zones of constant hydraulic conductivity to be estimated. Preliminary simulations suggest that in the case of conservative transport many, but not all, of the major plume characteristics can be explained by large-scale heterogeneity in recharge and hydraulic conductivity.

Explore related subjects

IAHS-AISH Publication Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

H.C. Barlebo, D. Rosbjerg, M. C. Hill. 1996. Identification of groundwater parameters at Columbus, Mississippi, using a 3D inverse flow and transport model. https://pubs.usgs.gov/publication/70018603

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2006

The Model Parameter Estimation Experiment (MOPEX): Its structure, connection to other international initiatives and future directions

The Model Parameter Estimation Experiment (MOPEX) is an international project aimed at developing enhanced techniques for the a priori estimation of parameters in hydrological models and in land surface parameterization schemes connected to atmospheric models. The MOPEX science strategy involves: database creation, a priori parameter estimation methodology development, parameter refinement or calibration, and the demonstration of parameter transferability. A comprehensive MOPEX database has been developed that contains historical hydrometeorological data and land surface characteristics data for many hydrological basins in the United States (US) and in other countries. This database is being continuously expanded to include basins from various hydroclimatic regimes throughout the world. MOPEX research has largely been driven by a series of international workshops that have brought interested hydrologists and land surface modellers together to exchange knowledge and experience in developing and applying parameter estimation techniques. With its focus on parameter estimation, MOPEX plays an important role in the international context of other initiatives such as GEWEX, HEPEX, PUB and PILPS. This paper outlines the MOPEX initiative, discusses its role in the scientific community, and briefly states future directions.

IAHS-AISH Publication↗

USGS2002

Evaluation of longitudinal dispersivity estimates from forced-gradient tracer tests in heterogeneous aquifers

Converging radial-flow and two-well tracer tests are simulated in two-dimensional aquifers to investigate the effects of heterogeneity and forced-gradient test configuration on longitudinal dispersivity (??L) estimates, and to compare ??L estimates from forced-gradient tests with ??L values that characterize solute spreading under natural-gradient flow. Results indicate that in both mildly and highly heterogeneous aquifers, ??L estimates from two-well tests are generally larger than those from radial-flow tests. In mildly heterogeneous aquifers, ??L estimates from two-well tests with relatively large tracer transport distances are similar to ??L values from natural-gradient simulations. In highly heterogeneous aquifers, ??L estimates from two-well tests at all tracer transport distances are typically smaller than ??L values from natural-gradient simulations.

IAHS-AISH Publication↗

USGS2002

Conceptual uncertainty in crystalline bedrock: Is simple evaluation the only practical approach?

A simple evaluation can be used to characterize the capacity of crystalline bedrock to act as a barrier to release radionuclides from a nuclear waste repository. Physically plausible bounds on groundwater flow and an effective transport-resistance parameter are estimated based on fundamental principles and idealized models of pore geometry. Application to an intensively characterized site in Sweden shows that, due to high spatial variability and uncertainty regarding properties of transport paths, the uncertainty associated with the geological barrier is too high to allow meaningful discrimination between good and poor performance. Application of more complex (stochastic-continuum and discrete-fracture-network) models does not yield a significant improvement in the resolution of geological barrier performance. Comparison with seven other less intensively characterized crystalline study sites in Sweden leads to similar results, raising a question as to what extent the geological barrier function can be characterized by state-of-the art site investigation methods prior to repository construction. A simple evaluation provides a simple and robust practical approach for inclusion in performance assessment.

IAHS-AISH Publication↗