Search USGSSearch

USGS · 70015952

Timing of uplift peripheral to the Red Sea, Saudi Arabia

Abstract

A Prominent escarpment is found along the western margin of the Arabian Shield. Elevations along this escarpment are up to 3200 m above the Red Sea. Between the Red Sea and the crest of the escarpment is a relatively featureless coastal plane that is ??? 50 km across. The coastal plane abruptly gives way to the steep mountainous terrain, the elevation of which increases abruptly towards the high crest. The elevation slowly decreases to the east of the high crest. Forty-four apatite fission-track ages have been determined on rocks from the Proterozoic Arabian Shield in southwestern Saudi Arabia. These ages range from 13.8 to 568 Ma. In general, the youngest ages are found at low elevations along the base of the escarpment near the eastern edge of the coastal plane. The oldest ages are from along and to the east of the crest. The fission-track data from Saudi Arabia show that there was a period of minor uplift and cooling during the Cretaceous. This was followed by a relatively stable period which lasted until the Mid to Upper Miocene. The latest uplift and erosion began slightly younger than 13.8 Ma. This latest episode resulted in a minimum uplift of 3 km and is related to the Red Sea Rift. Samples totally annealed prior to this latest episode of uplift and cooling have not yet reached the surface.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

C. W. Naeser, R.A. Zimmermann, R. G. Bohannon, D. L. Schmidt. 1990. Timing of uplift peripheral to the Red Sea, Saudi Arabia. https://doi.org/10.1016/1359-0189(90)90098-i

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

High temperature annealing of fission tracks in fluorapatite, Santa Fe Springs oil field, Los Angeles Basin, California

Annealing of fission tracks is a kinetic process dependent primarily on temperature and to a laser extent on time. Several kinetic models of apatite annealing have been proposed. The predictive capabilities of these models for long-term geologic annealing have been limited to qualitative or semiquantitative at best, because of uncertainties associated with (1) the extrapolation of laboratory observations to geologic conditions, (2) the thermal histories of field samples, and (3) to some extent, the effect of apatite composition on reported annealing temperatures. Thermal history in the Santa Fe Springs oil field, Los Angeles Basin, California, is constrained by an exceptionally well known burial history and present-day temperature gradient. Sediment burial histories are continuous and tightly constrained from about 9 Ma to present, with an important tie at 3.4 Ma. No surface erosion and virtually no uplift were recorded during or since deposition of these sediments, so the burial history is simple and uniquely defined. Temperature gradient (???40??C km-1) is well established from oil-field operations. Fission-track data from the Santa Fe Springs area should thus provide one critical field test of kinetic annealing models for apatite. Fission-track analysis has been performed on apatites from sandstones of Pliocene to Miocene age from a deep drill hole at Santa Fe Springs. Apatite composition, determined by electron microprobe, is fluorapatite [average composition (F1.78Cl0.01OH0.21)] with very low chlorine content [less than Durango apatite; sample means range from 0.0 to 0.04 Cl atoms, calculated on the basis of 26(O, F, Cl, OH)], suggesting that the apatite is not unusually resistant to annealing. Fission tracks are preserved in these apatites at exceptionally high present-day temperatures. Track loss is not complete until temperatures reach the extreme of 167-178??C (at 3795-4090 m depth). The temperature-time annealing relationships indicated by the new data from Santa Fe Springs conflict with predictions based on previously published, commonly used, kinetic annealing models for apatite. Work is proceeding on samples from another area of the basin that may resolve this discrepancy.

International Journal of Radiation Applications an

The effect of α-damage on fission-track annealing in zircon

The thermal stability of confined fission-track lengths in four zircon samples having different spontaneous track densities (i.e. different amounts of ??-damage) has been studied by one hour isochronal annealing experiments. The thermal stability of spontaneous track lengths is independent of initial spontaneous track density. The thermal stability of induced track lengths in pre-annealed zircon, however, is significantly higher than that of spontaneous track lengths. The results indicate that the presence of ??-damage lowers the thermal stability of fission-tracks in zircon. ?? 1988.

International Journal of Radiation Applications an