Search USGS⌕ Search

USGS · 70015815

Modern aerial gamma-ray spectrometry and regional potassium map of the conterminous United States

Abstract

Aerial gamma-ray surveys of the natural environment measure the flux of gamma rays produced by the radioactive decay of 40 K, 214 Bi, and 208 Tl in the upper 10–20 cm of surface materials. 40 K is a radioactive potassium isotope which can be used to estimate the total amount of potassium in the soils and rocks. 214 Bi is a decay product of the 238 U radioactive decay series and is used to estimate the uranium concentrations, and 208 Tl, a decay product of the 232 Th radioactive decay series, is used to estimate thorium concentrations. Aerial gamma-ray data covering the 48 contiguous states of the United States have been compiled to produce maps showing the distributions of equivalent uranium, equivalent thorium, and potassium. This compilation involved processing the aerial survey data from about 470 1° × 2° quadrangle maps. The aerial gamma-ray data were obtained as part of the National Uranium Resource Evaluation (NURE) Program sponsored by the U.S. Department of Energy during the period 1975-1983. References for the Open-File Reports that describe the surveys and data collection can be found in Bendix Field Engineering Corp. (1983). The aerial surveys were flown by contractors using fixed-wing and helicopter systems with 33-50 L (liters) of thallium-activated sodium iodide (NaI (TI)) crystals. The nominal survey altitude used is 122 m. The survey lines were generally east-west with line spacings of 1.6-10 km. Tie lines were flown perpendicular to the flight lines at intervals of 16- 30 km. The data were corrected for background from aircraft contamination and cosmic rays, altitude variations, airborne 214Bi, and Compton scattering. The gamma-ray systems were calibrated using the calibrations pads at Grand Junction, Colorado (Ward, 1978 ) and the dynamic test strip at Lake Mead, Arizona (Geodata International, Inc., 1977).

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 24.407137917727653° to 49.439556958940855° latitude; -124.8046875° to -66.796875° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Joseph S. Duval. 1990. Modern aerial gamma-ray spectrometry and regional potassium map of the conterminous United States. https://doi.org/10.1016/0375-6742(90)90076-m

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Top-down targeted network analysis of critical mineral commodities applied to international geochemistry database

The global demand for critical mineral commodities is rapidly increasing, making domestic production an important factor in supporting the economy and national security. Large scale, publicly available geochemical databases allow for the application of data informatics methods to interrogate critical mineral commodities data for correlations in deposit formation and distribution, particularly for identifying enrichment of multiple critical mineral commodities at the same deposit. In this study, we applied network analysis to the Critical Minerals Mapping Initiative (CMMI) ore geochemistry (Critical Minerals in Ores, CMiO) database to identify the high concentration (defined as 10× bulk crustal abundance) co-occurrence of different critical mineral commodities across a mineral system hierarchy from deposit environments to individual deposits. Identifying patterns or unique outliers in enrichment in network communities will allow for the location of secondary critical mineral commodity resources from under-utilized deposits. We find trends in the enrichment of critical mineral commodities in network-communities between the elements praseodymium (Pr), neodymium (Nd), terbium (Tb), and dysprosium (Dy) across multiple CMiO database deposit environments and groups down to specific deposit types and sites. A separate trend in network community deposition is observed as well between iridium (Ir) and platinum (Pt) in deposit environments, groups, types, and sites. Network analysis focused on critical minerals in magmatic-hydrothermal deposits identified multiple deposit sites from different deposit types within the CMiO database with concentrations of Dy, Nd, Tb, Pr, Ir, and Pt that are at least ten times greater than the crustal average. This approach can be applied to any target element(s) or deposit(s) of interest, allowing broad investigation of co-enriched critical mineral commodities.

Journal of Geochemical Exploration↗

Hyperspectral (VNIR-SWIR) analysis of roll front uranium host rocks and industrial minerals from Karnes and Live Oak Counties, Texas Coastal Plain

VNIR-SWIR (400–2500 nm) reflectance measurements were made on the surfaces of various cores, cuttings and sample splits of sedimentary rocks from the Tertiary Jackson Group, and Catahoula, Oakville and Goliad Formations. These rocks vary in composition and texture from mudstone and claystone to sandstone and are known host rocks for roll front uranium occurrences in Karnes and Live Oak Counties, Texas. Spectral reflectance profiles, 569 in total, were reduced to 125 representative spectral signatures, which were analyzed using the U.S. Geological Survey's (USGS) Material Identification and Characterization Algorithm (MICA). MICA uses an automated continuum-removal procedure together with a least-squares linear regression to determine the fit of observed sample spectral absorption features to those of reference mineral standards in a spectral library. The reference minerals include various clay, mica, carbonate, ferric and ferrous iron minerals and their mixtures. In addition, absorption feature band-depth analysis was done to identify rock surfaces exhibiting absorption features related to uranium and zeolite minerals, which were not included in the command files used to execute MICA. Rocks from each of the four geologic units produced broadly similar spectral signatures as a result of comparable mineral compositions, but there were some notable differences. For example, Ca- and Na-montmorillonite was matched most frequently to the spectral absorption features in 2-μm (∼2000–2500 nm) wavelengths, while goethite occurred often at 1-μm (∼400–1000 nm) wavelengths. The latter is related to limonitic iron-staining in and around oxidized zones of the uranium roll front as described in previous papers. Rocks of the Jackson Group differed from those of the Catahoula, Oakville and Goliad units in that the former exhibited spectral features we interpret as being due to the presence of lignite-bearing mudstone layers. Goliad rocks exhibit spectral features related to dolomite, gypsum, anhydrite, and an unidentified green clay mineral that is possibly glauconite . Jackson Group rocks also exhibit weak but well-resolved absorption features at 964 and 1157 nm related to either or both zeolite minerals clinoptilolite and heulandite. These zeolite minerals and a few spectra exhibiting hydrous silica absorption features are indicative of alteration of volcanic glass in tuffaceous mudstone and claystone layers. A few sample spectra exhibited strong absorption features at around 1135 nm related to the uranium mineral coffinite. Both the 1135 nm coffinite and 1157 nm zeolite absorption features overlap somewhat, potentially making them difficult to distinguish without additional hyperspectral field, laboratory or remote sensing data. The results of this study were compared to mixtures of minerals described for ore, gangue and alteration minerals in deposit models for sandstone-hosted uranium, sedimentary bentonite and sedimentary zeolite. Use of these spectra can help facilitate mapping of both waste materials from the legacy mining of the above commodities, as well as future exploration and resource assessment activities.

Texas↗

The addition of 144Nd atomic mass to routine ICP-MS analysis as a Quick Screening Tool for Approximating Rare Earth Elements (Q-STAR) in natural waters

Rare earth elements (REEs) are a class of critical minerals, all of which can have supply chain vulnerability that impacts economic security. These elements are widely measured in environmental matrices via inductively coupled plasma mass spectrometry (ICP-MS); however, successful quantification can require time-consuming, sample-specific optimization. While a sample-by-sample approach is appropriate for targeted quantification studies, this approach is not suitable for mineral exploration efforts where rapidly screening thousands of samples for the presence of REEs is desired. Here, we demonstrated the use of a Quick Screening Tool for Approximating REEs (Q-STAR) to detect REEs in surface water and groundwater matrices, collected as part of existing environmental studies. A mass-to-charge ratio of 144 ( m / z = 144) was added to an ICP-MS method to screen for REEs in filtered water samples submitted for metals analyses to the U.S. Geological Survey (USGS) National Water Quality Laboratory. We detected the presence of REEs above a reference threshold of 1200 counts per second in 18 % of pre-selected 6626 samples. Using this screened dataset, we mapped estimated dissolved REE concentrations across the United States in relation to ecoregions and underlying geology. Data are constrained to where sample collection took place but nevertheless show estimated aqueous dissolved REE concentrations on a geographic scale that has not yet been studied. To validate Q-STAR, REEs were measured in a USGS standard reference sample, a subset of 88 archived filtered water samples, and in fresh filtered surface water samples. Our targeted analyses demonstrated a strong linear relationship between Q-STAR predicted and measured values in all archived samples for Nd (r 2 = 0.94), and light REEs (LREEs) such as lanthanum (La) (r 2 = 0.93), praseodymium (Pr) (r 2 = 0.94) and samarium (Sm) (r 2 = 0.94). Using Q-STAR screen values, nine field sites were identified and surface water samples recollected to confirm the continued presence of Nd and LREEs. Q-STAR can be used to screen an unlimited number of water samples for the presence of REEs prior to time-intensive and costly quantitative analyses and to generate large REE datasets for further investigation.

Journal of Geochemical Exploration↗