Search USGS⌕ Search
Home/Archive/USGS

USGS · 70015530

A comparison of two methods for determining copper partitioning in oxidized sediments

Samuel N. Luoma
View original source ↗Export metadata ↓

Abstract

Model estimations of the proportion of Cu in oxidized sediments associated with extractable organic materials show some agreement with the proportion of Cu extracted from those sediments with ammonium hydroxide. Data were from 17 estuaries of widely differing sediment chemistry. The modelling and extraction methods agreed best where concentrations of organic materials were either in very high concentrations, relative to other sediment components, or in very low concentrations. In the range of component concentrations where the model predicted Cu should be distributed among a variety of components, agreement between the methods was poor. Both approaches indicated that Cu was predominantly partitioned to organic materials in some sediments, and predominantly partitioned to other components (most probably iron oxides and manganese oxides) in other sediments, and that these differences were related to the relative abundances of the specific components in the sediment. Although the results of the two methods of estimating Cu partitioning to organics correlated significantly among 24 stations from the 17 estuaries, the variability in the relationship suggested refinement of parameter values and verification of some important assumptions were essential to the further development of a reasonable model.

Explore related subjects

Marine ChemistryArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Samuel N. Luoma. 1986. A comparison of two methods for determining copper partitioning in oxidized sediments. https://doi.org/10.1016/0304-4203(86)90065-4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2022

The role of pH up-regulation in response to nutrient-enriched, low-pH groundwater discharge

Coral reefs and their ecosystems are threatened by both global stressors, including increasing sea-surface temperatures and ocean acidification (OA), and local stressors such as land-based sources of pollution that can magnify the effects of OA. Corals can physiologically control the chemistry of their internal calcifying fluids (CF) and can thereby regulate their calcification process. Specifically, increasing aragonite saturation state in the CF (Ω CF ) may allow corals to calcify even under external low saturation conditions. Questions remain regarding the physiological processes that govern the CF chemistry and how they change in response to multiple stressors. To address this knowledge gap, the boron δ 11 B and B/Ca were analyzed in tropical corals, Porites lobata, collected at submarine groundwater seeps impacted by the release of treated wastewater in west Maui, Hawai'i, to document the interactions between high nutrient / low pH seep water on CF carbonate chemistry. Results show substantial up-regulation of pH and dissolved inorganic carbon (DIC) with respect to seawater in P. lobata corals collected from within the wastewater impacted area at Kahekili Beach Park compared to the control site at Olowalu Beach. The Ω CF was 9 to 10 times higher than ambient seawater Ω, and 13 to 26% higher than in corals from the control site and from values previously observed in tropical Porites spp. corals. Such elevated up-regulation suggests that corals exposed to nutrient-enriched, low pH effluent sustain CF supersaturated with respect to aragonite, possibly as an internal coping mechanism to combat multiple stressors from land-based sources of pollution. This elevated up-regulation has implications to coral vulnerability to future climate- and ocean-change.

Hawaii↗
USGS2018

Reductive dechlorination rates of 4,4′-DDE (1-chloro-4-[2,2-dichloro-1-(4-chlorophenyl)ethenyl]benzene) in sediments of the Palos Verdes Shelf, CA

Wastes from the world's largest manufacturer of DDT (1-chloro-4-[2,2,2-trichloro-1-(4-chlorophenyl)ethyl]benzene) were released into the Los Angeles County municipal sewer system from 1947 to 1971. Following primary treatment, the effluent was discharged through a submarine outfall system whereupon a portion of the DDT and associated degradation products were deposited in sediments of the Palos Verdes Shelf (PVS). Parent DDT is present only in trace amounts in the sediments today, the vast majority having been transformed to DDE (1-chloro-4-[2,2-dichloro-1-(4-chlorophenyl)ethenyl]benzene) shortly following deposition. Previously believed to be inert, DDE is slowly being converted to DDMU (1-chloro-4-[2-chloro-1-(4-chlorophenyl)ethenyl]benzene) and DDMU to DDNU (1-chloro-4-[1-(4-chlorophenyl)ethenyl]benzene) via microbially-mediated reductive dechlorination (RDC). Kinetic and compositional data suggest that this process began sometime in the mid- to late 1970s. Rates of DDE RDC in shelf sediments are spatially variable and have proven difficult to determine accurately. This limits our ability to understand the factors controlling RDC rates and to predict the course of natural recovery. In the present study, concentrations of ten DDT compounds and twelve PCB (polychlorinated biphenyl) congeners were determined in cores collected at two locations on the PVS (stations 3C, 6C, ~7km and ~2km downcurrent from the outfalls, respectively). DDE inventories, normalized to those of non-degrading PCB congeners having similar physico-chemical properties, were modeled to yield first-order RDC rates for the period 1981–2010. Average rates at stations 3C and 6C were 0.044±0.004 and 0.008±0.002yr −1 , respectively, with depth-dependent RDC rates at station 3C (1992–2003) ranging from 0.0025 to 0.102yr −1 . Comparison of RDC and total loss (i.e., RDC+physical loss) rates suggests that the average per cent loss of DDE due to RDC is ~90% at station 3C (1981–2010) and ~57% at station 6C (1992–2010). Trajectories of adjusted molar inventories of DDE, DDMU, and DDNU were forecast using a first-order multi-step reaction series (M-SRS) model. The results for DDE are consistent with the normalization procedure; RDC rates at stations 3C and 6C were 0.036±0.002yr −1 and 0.010±0.001yr −1 , respectively. At station 6C, the DDE to DDMU transformation appears to be the rate limiting step in the reaction sequence, DDE k 1 → DDMU k 2 → DDNU k3 → unidentified compound(s), whereas at station 3C RDC rates for DDE and DDMU are roughly equivalent. At both locations the transformation rate of DDNU is 7–20 times that of the other steps. Estimated half-lives of DDE at stations 3C and 6C based on the M-SRS model results are ~19 and 72 years, respectively.

California↗
USGS2018

DDT and related compounds in pore water of shallow sediments on the Palos Verdes Shelf, California, USA

For nearly two and a half decades following World War II, production wastes from the world's largest manufacturer of technical DDT (1-chloro-4-[2,2,2-trichloro-1-(4-chlorophenyl)ethyl]benzene) were discharged into sewers of Los Angeles County. Following treatment, the wastes were released via a submarine outfall system to nearshore coastal waters where a portion accumulated in shallow sediments of the Palos Verdes Shelf (PVS). An investigation of the pore-water geochemistry of DDT-related compounds (DDX) was undertaken in an effort to understand factors controlling the rate of reductive dechlorination (RDC) of the major DDT degradate, 4,4′-DDE (1-chloro-4-[2,2-dichloro-1-(4-chlorophenyl)ethenyl]benzene). Equilibrium matrix-solid phase microextraction (matrix-SPMEeq) combined with automated thermal desorption-gas chromatography/mass spectrometry (TDGC/MS) was used to determine freely dissolved concentrations of ten DDX analytes in sediment cores collected from three locations on the PVS (stations 3C, 6C, 8C, which are 7 km, 2 km, and 0 km, respectively, downcurrent from the outfall system). Pore-water concentrations (pM) of the principal DDX compounds involved in RDC were: 3C-DDE: 6.0–24, DDMU (1-chloro-4-[2-chloro-1-(4-chlorophenyl)ethenyl]benzene): 11–160, DDNU (1-chloro-4-[1-(4-chlorophenyl)ethenyl]benzene): 1.8–68; 6C-DDE: 5.6–170, DDMU: 5.6–177, DDNU: 1.7–87; 8CDDE: 27–212, DDMU: 31–403, DDNU: 5.5–89. Variations in the spatial distribution of DDX analytes in pore water reflect several factors including proximity to the outfalls, RDC reaction rates, and natural variability in sedimentation and post-depositional transport processes. A comparison of pore-water data produced using matrix-SPME eq /TD-GC/MS and whole-core squeezing/solvent extraction/liquid injection-GC/MS indicates that the majority of the DDE in the upper sediment column (≤about 10 cm) is associated with dissolved/colloidal organic matter. Below that depth, freely-dissolved DDE predominates. The principal organic geochemical phase controlling sorption of DDE in PVS sediments are residual hydrocarbons, the vast majority of which originated from petroleum refinery wastes. Organic carbon-normalized sediment-water distribution coefficients (KOC) were calculated from solid-phase and pore-water concentrations of DDX and organic carbon. Log K OC values (L/kg) were relatively invariant across the shelf and with depth in the sediment column. Shelf-wide compound-specific coefficients (log K OC ) were: DDE: 7.5 ± 0.11, DDMU: 6.92 ± 0.13, DDNU: 6.37 ± 0.19. The spatial uniformity of K OC means that biological exposure and availability of the DDX compounds can, in principle, be estimated from solid-phase chemical measurements.

California↗