Search USGS⌕ Search

USGS · 70015200

Reservoir processes and fluid origins in the Baca geothermal system, Valles Caldera, New Mexico

Abstract

At the Baca geothermal field in the Valles caldera, New Mexico, 19 deep wells were drilled in an attempt to develop a 50-MW e (megawatts electric) power plant. The chemical and isotopic compositions of steam and water samples have been used to indicate uniquely the origin of reservoir fluids and natural reservoir processes. Two distinct reservoir fluids exist at Baca. These fluids originate from the same deep, high-temperature (335°C), saline (2500 mg/kg Cl) parent water but have had different histories during upflow. One fluid (from wells 4 and 13) is isotopically light, high in radiogenic noble gases, CO 2 and HCO 3 , and low in Ca. It has a temperature of 290°–295°C and a reservoir chloride near 1900 mg/kg. This fluid resulted from rapid upward flow through 1.1- to 1.4-m.y.-old Bandelier Tuff reservoir rocks after long residence in pre-Bandelier (>7 m.y.) sediments and Precambrian basement rocks and 25% dilution with high-altitude cold groundwater from Redondo Peak. The other water (from wells 15, 19, and 24) moved slowly through the Bandelier Tuff and cooled conductively (with minor steam loss for well 19) from 335°C to 280°–260°C. Apparently, short residence in old basement rocks has left this water with low radiogenic gases. Conductive cooling without mixing has kept the original chloride and relatively heavy isotope composition of the deep water. The recharge to the deep parent water is not well understood but may be from lower elevation precipitation outside the Valles caldera area. Gases are in equilibrium in all-liquid reservoir fluids at near reservoir temperatures, and the concentrations of atmospheric gases are similar to those of air-saturated water, indicating little boiling and steam loss. All water, solutes, and gases in the reservoir fluids originate from air-saturated meteoric recharge water, watermineral reactions, and rock leaching, with the possible exception of excess 3He that must have an ultimate mantle source. This gas could originate directly from magma or from leaching of intrusive volcanic rocks beneath the Bandelier.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

A.H. Truesdell, C. J. Janik. 2012-09-20. Reservoir processes and fluid origins in the Baca geothermal system, Valles Caldera, New Mexico. https://doi.org/10.1029/jb091ib02p01817

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Timescales of surface faulting preservation in low-strain intraplate regions from landscape evolution modeling and the geomorphic and historical record

Large surface-rupturing intraplate earthquakes in stable continental regions (SCRs) are uncommon globally and have recurrence intervals of thousands to hundreds of thousands of years based on the paleoseismic and geomorphic record, challenging accurate active fault identification in these regions. To constrain the timescales of preservation for scarps created by surface ruptures from dip-slip earthquakes, we use a two-dimensional scarp diffusion model for typical intraplate settings and explore which parameters influence fault scarp preservation. These parameters include the coseismic vertical surface offset, the recurrence interval of similar magnitude earthquakes, diffusivity (as a proxy for mean annual precipitation rate), and the erodibility of the surficial material. We constrain parameter ranges from a compilation of historical surface ruptures in intraplate settings in a variety of climates, including the Central and Eastern United States, Australia, Europe, Central Asia (Mongolia, China), India, and West Africa. The timescales of scarp preservation from landscape evolution modeling agree well with observations of scarp preservation in low-strain SCR and intraplate tectonic settings, with some notable exceptions for Australian scarps. We find that the erodibility of the surficial material and earthquake recurrence interval have a stronger effect on the timescales of scarp preservation than diffusivity or coseismic vertical surface offset. Our model results may aid in identifying and characterizing subtle, slow-moving active faults in low-strain SCR and intraplate tectonic settings for different tectonic, geomorphic, and climatic characteristics. Accurate fault locations and characterization from the landscape record has implications for both probabilistic seismic and fault displacement hazard analyses.

Journal of Geophysical Research Solid Earth↗

Exploring the dynamic interactions between the Southern San Andreas Fault and a normal fault under the Salton Sea

We investigate the dynamic interactions between the Southern San Andreas Fault (SSAF) and a proximal normal fault (NF) beneath the Salton Sea in southern California. The NF, positioned near the SSAF terminus at Bombay Beach, exhibits 11–15 displacement events across 14 stratigraphic sequences, with a range of 0.2–1.4 m of vertical offset since ∼2–3 ka. Notably, four of these events may align temporally with SSAF earthquakes, raising questions about the possible interplay between the two faults. Utilizing dynamic rupture models, we analyze the coseismic interactions between the SSAF and NF, addressing under what conditions the SSAF induces slip on the NF. Our findings reveal that a suite of SSAF ruptures, particularly those propagating from north to south, can trigger slip on the normal fault and replicate observed vertical offsets. If the SSAF extends beneath the Salton Sea, earthquakes originating south of the NF intersection are less likely to trigger normal fault slip, although we cannot exclude this possibility. Some SSAF ruptures do not trigger discernible slip on the NF, rendering such events undetectable in the stratigraphic record. Our research contributes toward discussions regarding the seismic hazard in southern California, shedding light on the interplay between the SSAF and NF.

California↗

Quantifying site effects and their influence on earthquake source parameter estimations using a dense array in Oklahoma

We investigate the effects of site response on source parameter estimates using earthquakes recorded by the LArge-n Seismic Survey in Oklahoma (LASSO). While it is well known that near-surface unconsolidated sediments can cause an apparent breakdown of earthquake self-similarity, the influence of laterally varying site conditions remains unclear. We analyze site conditions across the 1825-station array on a river plain within an area of 40 km by 23 km using vertical ground motions from 14 regional earthquakes. While the source radiation pattern controls P-wave ground motions below 8 Hz, the surface geology correlates with P-wave ground motions above 8 Hz and S-wave ground motions at 2–21 Hz. Stations installed in alluvial sediments have vertical ground motions that can exceed three times the array median. We use the variation of ground motion of regional earthquakes across the array as a proxy for site effects. The corner frequencies and stress drops of local earthquakes ( M L = 0.01–3) estimated using a standard single-spectra approach show negative correlations with the site-effect proxy, while the seismic moments show positive correlations. In contrast, the spectral-ratio approach effectively shows no correlation. The overall bias is small as expected for this relatively homogeneous structure; accurate estimation of site-related biases requires at least 30 stations. Correcting for site-related biases reduces the standard deviations of the source parameters by less than 13% of the total variations. Remaining variations are partially associated with source directivity and model misfits— as small earthquakes can have complex ruptures.

Oklahoma↗