Search USGS⌕ Search
Home/Archive/USGS

USGS · 70014699

Gravity-induced stresses in stratified rock masses

B. Amadei·H.S. Swolfs·W. Z. Savage
View original source ↗Export metadata ↓

Abstract

This paper presents closed-form solutions for the stress field induced by gravity in anisotropic and stratified rock masses. These rocks are assumed to be laterally restrained. The rock mass consists of finite mechanical units, each unit being modeled as a homogeneous, transversely isotropic or isotropic linearly elastic material. The following results are found. The nature of the gravity induced stress field in a stratified rock mass depends on the elastic properties of each rock unit and how these properties vary with depth. It is thermodynamically admissible for the induced horizontal stress component in a given stratified rock mass to exceed the vertical stress component in certain units and to be smaller in other units; this is not possible for the classical unstratified isotropic solution. Examples are presented to explore the nature of the gravity induced stress field in stratified rock masses. It is found that a decrease in rock mass anisotropy and a stiffening of rock masses with depth can generate stress distributions comparable to empirical hyperbolic distributions previously proposed in the literature. ?? 1988 Springer-Verlag.

Explore related subjects

Rock Mechanics and Rock EngineeringArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

B. Amadei, H.S. Swolfs, W. Z. Savage. 1988. Gravity-induced stresses in stratified rock masses. https://doi.org/10.1007/bf01019673

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2021

Material properties and triggering mechanisms of an andesitic lava dome collapse at Shiveluch Volcano, Kamchatka, Russia, revealed using the finite element method

Shiveluch volcano (Kamchatka, Russia) is an active andesitic volcano with a history of explosive activity, dome extrusion, and structural collapse during the Holocene. The most recent major (> 1 km 3 ) dome collapse occurred in November 1964, producing a ~ 1.5 km 3 debris avalanche that traveled over 15 km from the vent and triggered a phreatic explosion followed by a voluminous (~ 0.8 km 3 ) eruption of juvenile pyroclastic material. Seismic records suggest that the collapse was likely triggered by a magnitude 5.1 earthquake associated with the ascent of magma into the edifice. The geomechanical properties of the pre-1964 dome are unknown; accordingly, the mechanics of the collapse are poorly understood. This project employs numerical slope stability modeling using the finite element method to constrain probable ranges of geomechanical properties for the materials involved in the collapse, considering earthquake loading as the most likely triggering mechanism. Model results show good agreement with the 1964 collapse geometry considering Geological Strength Index and horizontal pseudo-static seismic coefficient ranges of 30–60 and 0.05–0.15 g, respectively, representing variably fractured and altered dome rocks under moderate earthquake loading, confirming that ground acceleration alone could have triggered the dome collapse. Deep-seated rotational sliding is the dominant failure mode, but local extension within the dome during failure appears to play an important role in the development of the collapse. The findings of this work allow for better forward modeling of potential future collapses, the results of which can be incorporated into regional hazard and risk assessments.

Shiveluch Volcano↗
USGS2019

Relaxation response of critically stressed macroscale surficial rock sheets

Rock environments both underground and on Earth’s surface show indications of energetic macroscale fracture. In tunnels and excavations, these manifest as rockbursts—energetic explosions of rock that can damage engineering projects, and may pose ongoing financial and safety risk as rock stresses adjust during post-failure relaxation. In natural settings at the surface, evidence for rockbursts exist in the form of tent-like structures of ruptured exfoliation sheets, but few direct observations of such events exist, precluding the analysis of how natural rock formations may evolve after rupture. Here we investigate the post-failure evolution of a granitic rock dome following rapid fracture events (i.e., surficial rockbursts) that occurred in California, USA during 2014–2016. Building upon previous work that showed a thermal stress origin for the observed fracturing, we investigate the return to background stress conditions (i.e., stress relaxation) observed in both short- (week, month) and long-term (multi-year) rock deformation trends. Acoustic emissions, deformation, and environmental monitoring data indicate that partially detached rock sheets forming the surface of the dome undergo fracture aperture closing during cooling periods, concurrent with reduction of rock stress by the source of forcing (i.e., thermal stress). However, with sufficient critical and/or subcritical fracture, our observations also show that rock sheets can become decoupled from the source of stress, resulting in a long-term return to background stress conditions. Our results provide insight into the cyclic and likely ephemeral nature of rock fracture in surficial rock domes, as well as in underground rockburst environments.

Rock Mechanics and Rock Engineering↗
USGS2016

Calibrated acoustic emission system records M -3.5 to M -8 events generated on a saw-cut granite sample

Acoustic emission (AE) analyses have been used for decades for rock mechanics testing, but because AE systems are not typically calibrated, the absolute sizes of dynamic microcrack growth and other physical processes responsible for the generation of AEs are poorly constrained. We describe a calibration technique for the AE recording system as a whole (transducers + amplifiers + digitizers + sample + loading frame) that uses the impact of a 4.76-mm free-falling steel ball bearing as a reference source. We demonstrate the technique on a 76-mm diameter cylinder of westerly granite loaded in a triaxial deformation apparatus at 40 MPa confining pressure. The ball bearing is dropped inside a cavity within the sample while inside the pressure vessel. We compare this reference source to conventional AEs generated during loading of a saw-cut fault in a second granite sample. All located AEs occur on the saw-cut surface and have moment magnitudes ranging from M −5.7 down to at least M −8. Dynamic events rupturing the entire simulated fault surface (stick–slip events) have measurable stress drop and macroscopic slip and radiate seismic waves similar to those from a M −3.5 earthquake. The largest AE events that do not rupture the entire fault are M −5.7. For these events, we also estimate the corner frequency (200–300 kHz), and we assume the Brune model to estimate source dimensions of 4–6 mm. These AE sources are larger than the 0.2 mm grain size and smaller than the 76 × 152 mm fault surface.

Rock Mechanics and Rock Engineering↗