Search USGS⌕ Search

Geology topics

Research about Tualatin River Basin

Source-linked reports with geographic coverage including Tualatin River Basin.

10 recordsLinked to original sources

Beaver dams and their effects on urban streams in the Tualatin River Basin, northwestern Oregon

Introduction In response to growing interest in beaver-assisted restoration in the Tualatin River Basin of northwestern Oregon, the U.S. Geological Survey (USGS), in partnership with Clean Water Services, collected data from 2016–17 and completed a series of studies to: (1) inventory known locations of beaver dams and activity in the Tualatin River Basin, (2) estimate the number of beaver dams in the Tualatin River Basin as of 2017 and the potential number of beaver dams that could be supported with riparian vegetation improvements, and (3) assess the effects of beaver dams and ponds on storm hydrology, hydraulics, and floodplain inundation, suspended-sediment transport and deposition, and water quality along two urban stream reaches (Fanno Creek at Greenway Park and Bronson Creek between Kaiser and Saltzman Roads). This fact sheet summarizes the results of these studies and implications for beaver-assisted restoration in the Tualatin River Basin.

Oregon↗

Beavers in the Tualatin River Basin, northwestern Oregon

Growing interest in beaver-assisted restoration in the Tualatin River Basin of northwestern Oregon motivated a series of studies by the U.S. Geological Survey to assess the capacity of the stream network to support beaver dams and to evaluate the effects of beaver dams and ponds on urban streams. This multichapter volume describes the data collection from 2016–17 and the findings of these studies, which were done in partnership with Clean Water Services. Chapter A documents the locations of beaver dams in the Tualatin River Basin and how many beaver dams the stream network could support with existing and improved riparian vegetation. Beaver dam capacity was estimated by modifying existing tools to account for the low gradient of many streams in the Tualatin River Basin. Chapter B describes the effects of beaver dams and ponds on hydrologic and hydraulic responses of storm flows. Hydrologic and hydraulic responses for two urban stream reaches were compared with and without beaver dams and ponds and for a range of streamflow conditions using two-dimensional hydraulic models. Chapter C characterizes the effects of beaver dams and ponds on the transport and deposition of suspended sediment. Continuous turbidity, discrete suspended-sediment samples, and streamflow measurements collected during storms and base-flow periods were used to assess: (1) suspended-sediment loads upstream and downstream from two beaver-affected reaches, and (2) seasonal and longitudinal turbidity patterns. Chapter D describes the effects of beaver dams and ponds on longitudinal, spatial, and seasonal water-quality patterns. Continuous and synoptic water-quality data were collected along urban stream reaches, and net ecosystem production was calculated for two beaver-affected reaches. The findings of these studies illustrate that the effects of beaver dams and ponds on hydrology, hydraulics, suspended-sediment transport and deposition, and water quality are dependent on the characteristics of a stream reach (for example, channel gradient, groundwater exchange, and riparian vegetation) and the characteristics of beaver dams and ponds along that reach. This information can be used to consider the implications of beaver-assisted restoration in the Tualatin River Basin and the effects of beaver dams and ponds in urban streams.

Oregon↗

Stream network capacity to support beaver dams in the Tualatin River Basin, northwestern Oregon

Significant Findings Beaver dams can help streams connect to their floodplains. These floodplain connections can expand the range of available aquatic habitats and aid in the restoration of stream and floodplain function and processes. American beavers ( Castor canadensis ) occupy a wide variety of aquatic habitats; however, their ability to build dams, the agent of stream and floodplain change, is constrained in large part by three physical variables—local vegetation, topography, and hydrology. These three physical variables are combined in the Beaver Restoration Assessment Tool (BRAT), a geographic information system-based utility that uses a Fuzzy Inference System (FIS) to estimate the capacity of each reach within a stream network to support beaver dams. In this study, version 1.0 of BRAT was adapted and applied to the entire perennial stream network of Tualatin River Basin in northwestern Oregon. Beaver-dam locations in the Tualatin River Basin were compiled to (1) define the distribution of dams in the basin during 2013–16 and (2) provide necessary data for calibrating and validating BRAT predictions. BRAT was calibrated to the current known distribution of dams, as compiled in the inventory. The input FIS equations of the original BRAT model were adjusted to account for local topographic conditions; specifically, the low gradient of many streams in the basin, although subsequent updates to BRAT may obviate the need for these changes. Results from this modified BRAT model reasonably simulated the dam inventory. Results show that beavers can currently build the greatest density of dams, defined as number of dams per kilometer of stream, in the higher-gradient forested streams of the basin, whereas they can build the fewest number of dams per kilometer in urban streams along the lower-gradient valley floor. Estimated dam density was generally 5-15 dams per kilometer (km) for forested streams and 2-4 dams/km for urban streams. Improving riparian vegetation along urban streams may allow beavers to build on average four additional dams per kilometer compared to current conditions. Results from this study may help inform local stream and stormwater management by (1) identifying stream reaches with the most potential to support beaver dams, (2) determining the likely factors limiting potential for dam building, and (3) identifying potential areas where dam building may affect human infrastructure.

Oregon↗

Effects of beaver dams and ponds on hydrologic and hydraulic responses of storm flows in urban streams of the Tualatin River Basin, northwestern Oregon

Significant Findings American beaver ( Castor canadensis ) dams fundamentally alter stream hydraulics and hydrology by temporarily impounding water in stream channels. Water managers are interested in how this impoundment translates to changes in hydrograph dynamics, particularly regarding the magnitude and duration of high flows, the temporary storage of storm water, and the range and spatial distribution of water depths and velocities. High-resolution two-dimensional hydraulic models were developed to compare hydraulic responses to storm events in two 1-kilometer long, relatively small (less than 5-meter-wide channel), urban stream reaches in the Tualatin River Basin (northwestern Oregon) with and without beaver dams. Results from modeling unsteady storm events show that: (1) beaver dams generally attenuate (temporarily impound) more water during storm events than an undammed reach, (2) the timing and dynamics of this attenuation are complicated and thus do not always result in a reduction of peak flows, and (3) the influence of beaver dams on stream hydraulics diminishes as the magnitude of flow events increase. Local geomorphic conditions, specifically the presence of off-channel features, affect the extent to which dams alter hydrograph dynamics. Although the magnitudes of peak flows are not substantially affected by the beaver dams considered in this study, results show that beaver dams temporarily impound a considerable amount of water throughout the duration of storms, which slows water conveyance to downstream reaches. Steady-state streamflow simulations at several streamflow magnitudes were also used to assess how beaver dams affect stream depths, velocities, and inundated areas, which are important factors affecting aquatic habitats. Results show that beaver dams result in a more hydraulically diverse stream, with substantially more inundated area, lower velocities, and greater depths than corresponding undammed scenarios. However, these differences diminish as streamflows increase and the channels overflow their banks and become hydraulically connected to adjacent floodplains. Together, these results confirm that beaver dams can fundamentally change urban stream channel hydraulics, but the influence of these dams is bounded by local geomorphic controls and is diminished at large streamflows.

Oregon↗

Effects of beaver dams and ponds on the transport and deposition of suspended sediment in urban streams of the Tualatin River Basin, northwestern Oregon

Significant Findings This study investigated the effects of natural beaver dams and ponds on sediment transport and deposition in two urban beaver-affected reaches in the Tualatin River Basin, northwestern Oregon. Data were collected during 2016–17 from Fanno Creek at Greenway Park (between SW Hall Boulevard and SW Pearson Court) and Bronson Creek (between NW Laidlaw Road and NW Kaiser Road); each study reach contained multiple beaver dams. Continuous turbidity, discrete suspended-sediment samples, and streamflow measurements were collected during storms and baseflow periods to calculate suspended-sediment loads (SSLs) and to compare differences in SSLs upstream and downstream from the two beaver-affected reaches. Turbidity was measured continuously upstream, within, and downstream from these reaches to evaluate seasonal and longitudinal turbidity patterns and fluctuations. The volume and mass of sediment deposited in a large pond along the Fanno Creek study reach were also estimated. Study results include: Instantaneous SSLs at the upstream reach boundaries often were greater at Bronson Creek compared to Fanno Creek during storm events. These differences were likely caused by the greater mean basin slope upstream from the Bronson Creek reach and its proximity to the headwaters in the Tualatin Mountains. In contrast, the frequency of sediment transport events was greater at the upstream boundary of the Fanno Creek study reach than at the upstream boundary of the Bronson Creek study reach, likely because Fanno Creek has a larger upstream contributing area and more frequent streamflow runoff events typical of urban streams. During water year 2017, approximately 140 metric tons (t) of sediment (11 percent of the total incoming load) were deposited in the Fanno Creek study reach, and 1,420 t of sediment (89 percent of the total incoming load) were deposited in the Bronson Creek study reach. Longitudinal reductions in turbidity were observed in both study reaches but varied among the two reaches. Turbidity reductions along the Fanno Creek study reach were associated with sediment deposition and storage in the south pond, a large floodplain pond formed by a beaver dam. Turbidity decreased gradually along the Bronson Creek study reach, indicating that sediment was deposited between the upstream and downstream boundaries. Differences in decreases in SSLs and turbidity among the two study reaches were attributed to reach characteristics, such as beaver dam characteristics, stream-floodplain hydraulic connections, and the type and density of the vegetation. The eastern part of the south pond in the Fanno Creek study reach trapped approximately 1,100 cubic meters of sediment (estimated 250 t) from 2012 to 2016 (the period between when beaver dams were first built in the reach and when topographic surveys were collected for this study). This amount is equivalent to about one seventh of the mean annual SSL moving through Fanno Creek as estimated by a previous study at the downstream U.S. Geological Survey streamgage at Fanno Creek at Durham Road (14206950). Beaver dams and ponds in urban streams can reduce SSLs and trap sediment. Consideration of reach-specific factors influencing the effects of beaver dams on sediment transport could help create realistic expectations for restoration programs about this potential benefit associated with beaver activity.

Oregon↗

Effects of beaver dams and ponds on water quality in urban streams of the Tualatin River Basin, northwestern Oregon

Significant Findings American beavers ( Castor canadensis ) are native to the Pacific Northwest, and their populations have increased in many locations after being nearly removed by historical trapping. Beaver dams have well-documented effects on water quality in forested streams, but their effects on water quality in urban streams have not been well characterized. The study documented the water-quality effects of beaver dams and beaver activity in selected urban streams of the Tualatin River Basin in northwestern Oregon. Variations in water quality upstream, downstream, and within ponded areas behind beaver dams were quantified with continuous measurements of water temperature, specific conductance, dissolved oxygen, and pH from May 2016 to November 2017 in two intensively monitored reaches of urban streams (Fanno and Bronson Creeks). Five other urban stream reaches were monitored upstream and downstream from beaver ponds using water-temperature sensors to document water-temperature changes in additional beaver-affected reaches. Spatial water-quality variations within a beaver pond along Fanno Creek were characterized in more detail on four hot summer afternoons with numerous measurements of temperature and dissolved oxygen. Results from the study were used to document and derive insights from measured patterns in the water-quality data, such as the following: Shallow and unshaded ponds created by beaver dams (such as at Fanno Creek) capture more solar radiation than channelized and shaded stream reaches, resulting in substantially warmer water temperatures during summer. A large beaver pond along Fanno Creek had variable water depths and riparian shade, resulting in a wide range of water-temperature and dissolved-oxygen conditions. Some conditions measured during summer were stressful for sensitive aquatic species, with temperatures higher than 18 degrees Celsius (°C) and (or) dissolved-oxygen concentrations less than 2 milligrams per liter (mg/L). Although water flowing out of beaver-affected reaches was warmer than water entering the reaches, water tended to cool downstream when streams returned to a more-shaded, confined channel (such as at Fanno Creek) or received subsurface inputs and exchange (such as at Bronson Creek). The magnitude of water-temperature increases in beaver ponds depended on site characteristics, such as the surface area and depth of the ponds, the extent of riparian shade, and the potential for subsurface exchange. Beaver dams caused Fanno Creek to overflow its banks, resulting in a wide and shallow floodplain pond that had little riparian shade in most places. In contrast, Bronson Creek remained in its stream channel behind the beaver dams, was often deeper and more shaded, and had more subsurface water exchange than the Fanno Creek reach. Despite the longer reach length, these differences caused the Bronson Creek reach to warm less than the Fanno Creek reach. Beaver dams trapped sediment and organic matter, and ponding increased the time available for organic matter to decompose in the trapped sediments, thus consuming dissolved oxygen. The construction of a beaver dam in the monitored reach of Bronson Creek during the study caused an increase in oxygen demands and a rapid decrease in dissolved-oxygen concentrations. Dissolved-oxygen concentrations in monitored study reaches were affected by primary production (algal photosynthesis) and respiration, and hypoxic (low to zero dissolved oxygen) conditions were measured in the two intensively monitored reaches for multiple weeks during summer. Two single-station stream metabolism models were used to calculate net ecosystem production in the two intensively monitored urban stream reaches. Results indicated that the reaches were heterotrophic, with respiration demands consuming more oxygen than what was produced through photosynthesis. Beaver ponds at all sites had a measurable effect on water quality, causing wider ranges in temperature and dissolved-oxygen conditions than would have occurred without ponding. That wider range (both spatially and temporally) might support a variety of aquatic organisms, but also is likely to increase the frequency of water-quality standard violations in those beaver-affected reaches. Any water-quality effects or standard violations associated with beaver dams and ponds, however, may be localized or transitory along the stream network. Restored stream reaches can attract beavers. Considering the potential for beaver colonization when designing habitat restoration plans will require evaluation of the potential water-quality changes associated with beaver dams and ponds alongside other desired physical changes.

Oregon↗

Prioritization framework for ranking riverine ecosystem stressors using example sites from the Tualatin River Basin, Oregon

As human populations increase, so does their influence over the environment. Altered terrain, degraded water quality, and threatened or endangered species are all-too-common consequences of a growing anthropogenic influence on the landscape. To help manage these effects, researchers have developed new ways to characterize current environmental conditions and help resource managers seek solutions to bring affected areas back to their best attainable health. Before an ecosystem can be improved, however, its current level of ecological stress must be determined. Characterizing environmental conditions at many sites across a landscape helps managers understand the range of current conditions and prioritize where they might focus restoration and protection efforts. This report details the development of a prioritization framework to score riverine ecosystem stressors in a watershed based on example sites from the Tualatin River Basin in northwestern Oregon. The framework incorporated the most influential site-specific stressors throughout the basin built on a long history of data collection. These stressors were characterized with 13 metrics that were organized into 4 groups: hydrologic, water quality, physical habitat, and biological. Each stressor metric used readily accessible data and was translated to a score between 0 and 10. The higher the score, the healthier the site. This initial application of the framework used field observations and measurements to rank site conditions at two Tualatin River sites and four Tualatin River tributary sites. Given the versatility of this framework, it easily could be expanded to include more sites or new metrics, if necessary. Because stressors varied by season, all metrics for the tributary sites were scored separately during the wet season (November through April) and dry season (May through October). Water-quality data were available over a prolonged period; therefore, water-quality metrics were assessed by season and by decade (1990–99 compared to 2000–12) to evaluate long-term stressor trends. Results for the Tualatin River Basin prioritization framework indicated that the urban tributaries demonstrated the greatest stress throughout the year, especially during the dry summer months. Spatially, the upper Tualatin River was healthier than the lower reaches of the river. Water-quality has improved in the last 10 years, mostly due to improvements in the dry period contaminant scores, but challenges remain with high water temperatures and low dissolved-oxygen conditions. The biggest challenge with this type of research derived from inconsistencies within the available data. Both spatial and temporal data gaps must be addressed to improve the prioritization. Incorporating both discrete and continuous datasets into the prioritization framework remains a challenge because the datasets have slightly different information and criteria and are not always comparable. Regardless, this report provides guidelines for developing a prioritization framework that ranks the ecological health of sites in a watershed and provides guidance on management actions for improving conditions by targeting factors that greatly affect the health of river ecosystems.

Oregon↗

Water-temperature, specific-conductance, and meteorological data for the Tualatin River basin, Oregon, 1994-95

Water-temperature, air-temperature, specific- conductance, wind-speed, and solar-radiation data are presented from a study conducted in the Tualatin River Basin in northwestern Oregon during 7-month periods from May 1 through November 30, 1994 and May 1 through November 30, 1995. The study was done to assist local and State agencies in understanding temporal and spatial patterns of water temperatures in the river, determining the relation between water temperature and human activities, and developing urban and agricultural management strategies for controlling impacts on stream temperatures. Data were collected at 14 fixed-station continuous monitoring sites located on or near the main stem and major tributaries. Data fromtemperature and specific-conductance sites were collected instantaneously every 30 minutes on the hour and half hour. Wind-speed and solar-radiation data at two sites were averaged every 60 minutes. Wind-speed and solar-radiation data at a third site were averaged every 30 minutes. Water temperature data were also collected during seven synoptic surveys near the two main wastewater-treatment plants. The surveys were conducted during the low-flow period from August to October of 1994 and August to September 1995. During each survey, up to six recording temperature probes were positioned at locations upstream and downstream of plant effluent outlets. The probes collected data every 16 minutes over 48-hour periods.

Oregon↗

Water-quality, streamflow, and meteorological data for the Tualatin River Basin, Oregon, 1991-93

Surface-water-quality data, ground-water-quality data, streamflow data, field measurements, aquatic-biology data, meteorological data, and quality-assurance data were collected in the Tualatin River Basin from 1991 to 1993 by the U.S. Geological Survey (USGS) and the Unified Sewerage Agency of Washington County, Oregon (USA). The data from that study, which are part of this report, are presented in American Standard Code for Information Interchange (ASCII) format in subject-specific data files on a Compact Disk-Read Only Memory (CD-ROM). The text of this report describes the objectives of the study, the location of sampling sites, sample-collection and processing techniques, equipment used, laboratory analytical methods, and quality-assurance procedures. The data files on CD-ROM contain the analytical results of water samples collected in the Tualatin River Basin, streamflow measurements of the main-stem Tualatin River and its major tributaries, flow data from the USA wastewater-treatment plants, flow data from stations that divert water from the main-stem Tualatin River, aquatic-biology data, and meteorological data from the Tualatin Valley Irrigation District (TVID) Agrimet Weather Station located in Verboort, Oregon. Specific information regarding the contents of each data file is given in the text. The data files use a series of letter codes that distinguish each line of data. These codes are defined in data tables accompanying the text. Presenting data on CD-ROM offers several advantages: (1) the data can be accessed easily and manipulated by computers, (2) the data can be distributed readily over computer networks, and (3) the data may be more easily transported and stored than a large printed report. These data have been used by the USGS to (1) identify the sources, transport, and fate of nutrients in the Tualatin River Basin, (2) quantify relations among nutrient loads, algal growth, low dissolved-oxygen concentrations, and high pH, and (3) develop and calibrate a water- quality model that allows managers to test options for alleviating water-quality problems.

Oregon↗

Appraisal of streamflow in Tualatin River basin, Washington County, Oregon

This report describes the within-year time distribution of streamflow; the magnitude and frequency of annual minimum, mean, and maximum flows; and the within-year storage required to sustain selected flows in the Tualatin River basin. The report does not include an appraisal of instantaneous peak discharges in the basin. Data were derived by statistical methods and are adequate for general water-development planning. A duration hydrograph provides a general description of the within-year time distribution of streamflow. Generalized equations based on a sample of gaged flows are presented for estimating magnitude and frequency of flows at ungaged sites. Generalized storage relations are included for estimating storage requirements at gaged and ungaged sites.

Oregon↗