Search USGS⌕ Search

Geology topics

Research about San Francisco, California

Source-linked reports with geographic coverage including San Francisco, California.

At least 109 records · Page 6Linked to original sources

A survey of molecular marker compounds in sediments of San Francisco Bay, California

An areal survey of surficial sediments in San Francisco Bay has been conducted to evaluate the presence of extractable organic compounds. Molecular marker compounds studied include hydrocarbons (PAH's), chlorinated pesticides, and other organic compounds that provide information on sources of organic input into the Bay. Fairly uniform source profiles are seen throughout the Bay. Biomarker profiles contain mature constituents indicating anthropogenic influences and extensive sediment reworking. The dominant input signatures in San Francisco Bay sediment are those of anthropogenic PAH's from combustion and other sources, and long chain n-alkanes and n-aldehydes from terrigenous vascular plants. A comparison of the sums of the combustion PAH's and the terrigenous n-alkanes shows that an anthropogenic influence is dominant in the most urban parts of the Bay close to shore, and in mid-Bay channel areas, and a terrigenous signature is dominant nearshore in San Pablo Bay and at the southernmost station in South Bay.

California↗

San Francisco Bay/delta regional monitoring program plankton and water quality pilot study, 1993, in 1993 Annual Report, San Francisco Estuary Regional Monitoring Program for Trace Substances: San Francisco Estuary Institute

The pilot program described here is motivated by a fundamental principle of the Regional Monitoring Strategy, namely “...the development of data that will provide information on status and trends in the Estuary.” As pointed out in the Strategy, knowledge of status and trends serves two primary purposes: (1) to become aware of or anticipate deleterious conditions in the Estuary, and (2) to assess the effectiveness of management actions. This program addresses these two purposes by focusing on aquatic resources, one of the five key management issues identified by the Comprehensive Conservation and Management Plan and central to the Regional Monitoring Strategy. It also bears on at least two of the other management issues - pollutants and water use. A regional monitoring program must cover many types of resources, including pelagic and benthic channel habitat, shoal habitat, wetlands, river channels, sloughs, and small bays and harbors. This particular program centers on the pelagic channel habitat. However, because of the intimate connection between channel habitat and many or most of these other habitats, channel measurements reflect to some extent the status of and trends in other resource types as well. A primary aim of this program is to provide a high-resolution description of critical aspects of habitat quality, which can be used along with other information (1) to determine the suitability of habitat for aquatic resources; (2) to monitor responsiveness of the habitat to freshwater flow variability; and (3) to provide a context for understanding pollutant distributions. In a single transect, measurements are made throughout the water column at up to 37 stations to define physical (salinity, temperature, suspended particulate matter, and light penetration), chemical (dissolved oxygen) and biological (chlorophyll a ) characteristics that influence both chemical and biological reactions. A second aim of the program is to investigate planktonic indicators of ecosystem structure and function. Phytoplankton production is the major single source of energy for the San Francisco Bay food web. Our measurements of chlorophyll and light penetration can be used to provide an estimate of this production, and therefore the availability of food for organisms at higher trophic levels. Phytoplankton community composition at the species level, which can be a sensitive indicator of habitat change, is also a standard component of this program. Community composition data enable detection of species known to be responsible for harmful or nuisance algal blooms. In 1993, two other indicators were also evaluated, photosynthetic parameters and water column respiration . Photosynthetic parameters partially characterize the physiological state of the phytoplankton and may provide indirect evidence of nutrient deficiency or the effects of pollutants. Water column respiration serves as a simple integrated measure of organic matter metabolism by the plankton, including bacteria, phytoplankton, and microzooplankton. It therefore reflects the total supply of organic matter, whether from photosynthesis, tidal marsh efflux, point sources, or upstream in the Delta. These biological indicators therefore contain much information about the flow of energy into the food web.

California↗

Response of a 42-storey steel-frame building to the Ms = 7.1 Loma Prieta earthquake

A set of 14 acceleration records was obtained from a 42-storey steel-frame building, the Chevron Building, in San Francisco during the M s = 7.1 "> M s = 7.1 Loma Prieta earthquake of 17 October 1989. Data were analysed using a system identification method based on the discretetime linear filtering, and the least-squares estimation techniques. The results show that the response of the building is dominated by two modes: a translational mode in the weaker (southwest-northeast) principal direction of the building at 0.16 Hz with 5% damping, and a translational-torsional mode along the east-west diagonal of the building's cross-section at 0.20 Hz with 7% damping. There are significant contributions from higher modes at 0.54 Hz, 0.62 Hz, 1.02 Hz and 1.09 Hz. All the modes incorporate some torsion, but the amplitudes of torsional components are small, about 10% of translational amplitudes. Soil-structure interaction influences the vibrations near 1.0 Hz. The contribution of soil-structure interaction to the peak displacements of the building is significant, particularly at lower floors.

California↗

Organic carbon sources and sinks in San Francisco Bay: variability induced by river flow

Sources and sinks of organic carbon for San Francisco Bay (California, USA) were estimated for 1980. Sources for the southern reach were dominated by phytoplankton and benthic microalgal production. River loading of organic matter was an additional important factor in the northern reach. Tidal marsh export and point sources played a secondary role. Autochthonous production in San Francisco Bay appears to be less than the mean for temperate-zone estuaries, primarily because turbidity limits microalgal production and the development of seagrass beds. Exchange between the Bay and Pacific Ocean plays an unknown but potentially important role in the organic carbon balance. Interannual variability in the organic carbon supply was assessed for Suisun Bay, a northern reach subembayment that provides habitat for important fish species (delta smelt Hypomesus transpacificus and larval striped bass Morone saxatilus). The total supply fluctuated by an order of magnitude; depending on the year, either autochthonous sources (phytoplankton production) or allochthonous sources (riverine loading) could be dominant. The primary cause of the year-to-year change was variability of freshwater inflows from the Sacramento and San Joaquin rivers, and its magnitude was much larger than long-term changes arising from marsh destruction and point source decreases. Although interannual variability of the total organic carbon supply could not be assessed for the southern reach, year-to-year changes in phytoplankton production were much smaller than in Suisun Bay, reflecting a relative lack of river influence.

California↗

1993 Annual Report: San Francisco estuary regional monitoring program for trace substances

This first annual report of the San Francisco Estuary Regional Monitoring Program contains the results of monitoring measurements made in 1993. Measurements of conventional water quality parameters and trace contaminant concentrations were made at 16 stations throughout the Estuary three times during the year: the wet period (March), during declining Delta outflow (May), and during the dry period (September). Water toxicity tests were conducted at 8 of those stations. Measurements of sediment quality and contaminant concentrations were made at the same 16 stations during the wet and dry sampling periods. Sediment toxicity was measured at 8 of those stations. Transplanted, bagged bivalve bioaccumulation and condition was measured at 11 stations during the wet and dry sampling periods. Water Monitoring. Total or near-total (dissolved + particulate, see text) arsenic, cadmium, selenium, and dissolved (0.45 µm filtered) arsenic, cadmium, copper, nickel, silver, and zinc in water were highest in the South Bay. In general, dissolved metals in water were usually lowest in the Central Bay due to ocean influences. Near-total nickel and total mercury in water were highest in the northern estuary (San Pablo and Suisun Bays). Dissolved chromium and lead were highest at the Sacramento and San Joaquin River confluence stations. Six of the ten dissolved trace metals were highest in March during high runoff. Dissolved and total arsenic, selenium, and near-total cadmium were highest in September. Concentrations of trace organic contaminants are reported for the March sampling period. Total PAHs and PCBs were highest in the South Bay, but PCBs were also high in the Napa River. Dissolved PAHs were highest in the Central Bay, and dissolved PCBs were highest in the Napa River. Total and dissolved pesticides were highest in the Sacramento River and in the Extreme South Bay. Concentrations of trace elements in water (except selenium) were usually closely related with other environmental parameters. Total or near-total metals concentrations in water were most often associated with the amount of particulate material (TSS) in the water. Dissolved concentrations were usually associated with salinity or dissolved organic carbon (DOC) content. Dissolved PAHs were well correlated with TSS, but dissolved and total trace organic contaminants were poorly correlated with other water parameters. Based on deviations from conservative mixing of fresh and salt water, three different patterns of possible sources of metals were identified in 1993. For dissolved chromium and lead, rivers and local runoff appeared to be important sources. For dissolved arsenic, cadmium, copper, and nickel year-round inputs from the South Bay appeared to be important sources. Dissolved mercury, selenium, and zinc were associated with local runoff in the South Bay during the wet period. Dissolved silver did not fit any of these patterns. Although most contaminant concentrations were below water quality objectives, several trace contaminants were above the objectives at some stations. Comparisons to water quality objectives are used as a guide for evaluation of contaminant concentrations, but there are some differences in the way the RMP data are measured and that prescribed for regulatory purposes (see text). Concentrations of 5 metals in water were above EPA or Regional Basin Plan water quality objectives at six stations (see Table 30). Most of these elevated levels occurred at the northern estuary stations. Total PCB concentrations were above EPA human health objectives at all RMP stations. The pesticides chlordane, dieldrin, and DDTs were above the EPA objectives at several RMP stations, particularly at the northern-most, and river confluence stations. Although some of the contaminant concentrations were above water quality objectives, water toxicity tests (96 hour algal growth and 48 hour bivalve larval development tests) did not indicate toxicity (sometimes inconclusive) associated with the water samples collected at any of the RMP stations in 1993. Exposure to Bay San Francisco Estuary Regional Monitoring Program Regional Monitoring Program 1993 Report ii water actually enhanced algal growth at most stations. In addition to the Estuary-wide sampling, the Sacramento and San Joaquin Rivers were sampled upstream from their confluence. Stations in each river were sampled six times over a 6 week period of high flows. In the Sacramento River, seven of the ten dissolved metals measured had concentrations lower than those measured at the river confluence stations. Some metals concentrations in the San Joaquin River were higher, and some were lower than concentrations from the river confluence station. Metals concentrations in the Sacramento River were poorly related to river flow because the station at Rio Vista is under considerable tidal influence. In the San Joaquin River, flows were inversely related to 7 of 10 total metals concentrations. Sediment Monitoring. Concentrations of silver, mercury, and lead in sediment were highest in the South Bay. However, concentrations of most trace metals in sediments were highest in the northern estuary at stations with the finest (silt, clay) sediments. The northern estuary stations with the coarsest (sand, shell) sediments generally had the lowest metals concentrations. There were differences in concentrations of cadmium, lead, and selenium in sediments between the sampling periods, but no consistent trend as to which sampling period had higher values. In September, PAHs and PCBs in sediments were highest in the Central Bay, but pesticides in sediments were highest in the northern estuary and Extreme South Bay. NOAA’s Median Effects Ranges (ERM) for sediments were used as a guide for evaluation of sediment contaminant concentrations. Nickel was the only trace contaminant in sediment above the ERM guidelines, and it was high at all RMP stations. These high levels are probably due to natural, geologic sources. Although sediment contaminant concentrations were below ERMs, sediment toxicity tests (10 day amphipod mortality, and 48 hour bivalve larval development in elutriates) indicated toxicity at all stations tested. Sediment factors that could have caused the toxicity were not investigated. Bivalve Bioaccumulation. Mussels, oysters, and freshwater clams were transplanted to the RMP stations to evaluate bioaccumulation of trace substances. Trace metals were bioaccumulated at nearly all RMP stations. However, arsenic, lead, and mercury did not appear to bioaccumulate. There was generally more bioaccumulation during the dry season than during the wet season. In September, PAHs, PCBs, and pesticides accumulated in all samples. Bioaccumulation of PAHs and pesticides was generally highest at the river confluence stations, and the Napa River. PCBs accumulated most at Redwood Creek. There were substantial differences in the degree of bioaccumulation among the species. Oysters appeared to accumulate higher concentrations of trace metals than the other species, especially copper, which may be a natural phenomenon. There are no established tissue contaminant standards for trace metal and organic contaminants. Therefore, comparisons to Median International Standards (MIS) for human consumption, or U.S. Food and Drug Administration (USFDA) action levels for trace organics are used to evaluate the bioaccumulation results. Concentrations of selenium were higher than MIS guidelines at all stations during the wet season. Other trace metal concentrations were higher than MIS guidelines at various stations during one or the other sampling period. However, none of the bivalves contained concentrations above the USFDA or National Academy of Sciences (NAS) guidelines for trace organic contaminants. The transplanted bivalves survived well at all stations except in the Napa River where less than 35% survived during both sampling seasons. Measures of bivalve condition (dry weight, shell volume) indicated that bivalves deployed in the Central Bay grew significantly, but those at most other stations actually lost weight. Whether these differences were due to natural causes such as salinity or food supply, or to contamination, was not determined. Pilot Studies. Two pilot monitoring studies were conducted in 1993. A pilot study of Estuary hydrography and phytoplankton was conducted by scientists from the U.S. Summary Geological Survey in Menlo Park and U.C. Davis. Water column profiles at up to 37 stations were monitored along a transect of the Estuary run monthly between the South Bay and the Delta. The primary objective of this study was to define physical (salinity, temperature, suspended particulate matter, and light penetration), chemical (dissolved oxygen) and biological (chlorophyll a) characteristics of Estuary water that may influence other chemical and biological reactions. A second objective was to investigate planktonic indicators of ecosystem structure and function. The data collected in 1993 showed the extent and duration of the spring phytoplankton bloom in the South Bay, other localized blooms in the northern estuary, the stratification and mixing associated with the entrapment zone in the northern estuary, and mixing in the Estuary resulting from the high rainfall in 1993. Knowledge of the duration and extent of these natural features of the Estuary provide context for interpretation of the RMP contaminant data collected only 3 times per year. Another pilot study of suspended sediment transport processes was conducted by the USGS in Sacramento. This study used continuous recording sensors at Point San Pablo and the Bay Bridge to measure the amount of suspended sediment in the water at mid-depth and near the bottom, as well as tide height. The objectives of this study were to estimate which factors determine suspended solids concentrations in the Central Bay and to collect time series of suspended solids that are appropriate for continuous monitoring of suspended solids and for calibration and validation of numerical models. The investigators determined that spring tides accounted for most of the variation in suspended solids concentrations at the stations monitored, not runoff from the Sacramento or San Joaquin Rivers, or semidiurnal and diurnal tides. Comparisons were also made between measurements made by the continuous recordings and the RMP samples collected during the regular monitoring cruises. The different ways of measuring TSS were generally comparable, however only 3 measurements per year as made by the RMP could not provide the information of TSS variation actually occurring in the Estuary. This information is important because as shown by the RMP data, total contaminant concentrations in Estuary water is largely dependent on the TSS in the water. This implies that the RMP measurements alone cannot determine accurately the range of contaminant concentrations without better characterizing the dynamics of TSS. The RMP Pilot Studies are important to the developing RMP because they will help put RMP measurements into the perspective of Estuary processes and mechanisms at other time scales. The studies can relate those processes to the RMP measurements and will facilitate revision of sampling design and interpretation. Summaries of other monitoring activities pertinent to regional monitoring are also included in the Report: a description of the Regional Board’s Bay Protection Studies, the Sacramento Coordinated Monitoring Program, and a wetlands monitoring plan are included.

California↗

GIS mapping of earthquake ground shaking in San Francisco, California

Severe earthquakes of the last decade in Mexico, Armenia, and the United States have reemphasized the importance of local geologic site conditions in estimating damage and consequent losses. Recent advances in geographic information system (GIS) technology have created new opportunities for maintaining and integrating extensive spatial databases for applications in seismic hazard analysis. Ground motion data and damage distributions from past earthquakes are combined with GIS databases of geologic information to prepare preliminary maps for inferring input ground motion levels for earthquake resistant design. Maps of bedrock elevation, surface topography, and surface geology are used to develop maps of soil thickness and predominant period. Ground motion attenuation relationships are used to create maps estimating ground shaking intensity for a uniform ground condition. Relationships between geologic characteristics, ground motion amplification, and earthquake intensity are used to produce amplification capability maps. Estimated ground shaking for the uniform ground condition is combined with amplification capability to develop maps predicting regional ground shaking intensity. The methods of predictive GIS mapping described here are useful for estimating characteristics of input ground motion in many urbanized seismic regions of the world.

California↗

On the characteristics of local geology and their influence on ground motions generated by the Loma Prieta earthquake in the San Francisco Bay region, California

Strong ground motions recorded at 34 sites in the San Francisco Bay region from the Loma Prieta earthquake show marked variations in characteristics dependent on crustal structure and local geological conditions. Peak horizontal acceleration and velocity inferred for sites underlain by “rock” generally occur on the transverse component of motion. They are consistently greater with lower attenuation rates than the corresponding mean value predicted by empirical curves based on previous strong-motion data. Theoretical amplitude distributions and synthetic seismograms calculated for 10-layer models suggest that “bedrock” motions were elevated due in part to the wide-angle reflection of S energy from the base of a relatively thin (25 km) continental crust in the region. Characteristics of geologic and geotechnical units as currently mapped for the San Francisco Bay region show that average ratios of peak horizontal acceleration, velocity and displacement increase with decreasing mean shear-wave velocity. Ratios of peak acceleration for sites on “soil” (alluvium, fill/Bay mud) are statistically larger than those for sites on “hard rock” (sandstone, shale, Franciscan Complex). Spectral ratios establish the existence of predominant site periods with peak amplifications near 15 for potentially damaging levels of ground motion at some sites underlain by alluvium and fill/bay mud. Average spectral amplifications inferred for vertical and the mean horizontal motion are, respectively, (1,1) for sites on the Franciscan Complex (KJf), (1.4, 1.5) for sites on Mesozoic and Tertiary rocks (TMzs), (2.1, 2.0) for sites on the Santa Clara Formation (QTs), (2.3, 2.9) for sites on alluvium (Qal), and (2.1, 4.0) for sites on fill/Bay mud (Qaf/Qhbm). These mean values are not statistically different at the 5% significance level from those inferred from previous low-strain data. Analyses suggest that soil amplification and reflected crustal shear energy were major contributors to levels of ground motion sufficient to cause damage to vulnerable structures at distances near 100 km in the cities of San Francisco and Oakland.

California↗

The Loma Prieta, California, earthquake of October, 17, 1989: Marina District

During the earthquake, a total land area of about 4,300 km2 was shaken with seismic intensities that can cause significant damage to structures. The area of the Marina District of San Francisco is only 4.0 km2--less than 0.1 percent of the area most strongly affected by the earthquake--but its significance with respect to engineering, seismology, and planning far outstrips its proportion of shaken terrain and makes it a centerpiece for lessons learned from the earthquake. The Marina District provides perhaps the most comprehensive case history of seismic effects at a specific site developed for any earthquake. The reports assembled in this chapter, which provide an account of these seismic effects, constitute a unique collection of studies on site, as well as infrastructure and societal, response that cover virtually all aspects of the earthquake, ranging from incoming ground waves to the outgoing airwaves used for emergency communication. The Marina District encompasses the area bounded by San Francisco Bay on the north, the Presidio on the west, and Lombard Street and Van Ness Avenue on the south and east, respectively. Nearly all of the earthquake damage in the Marina District, however, occurred within a considerably smaller area of about 0.75 km2, bounded by San Francisco Bay and Baker, Chestnut, and Buchanan Streets. At least five major aspects of earthquake response in the Marina District are covered by the reports in this chapter: (1) dynamic site response, (2) soil liquefaction, (3) lifeline performance, (4) building performance, and (5) emergency services.

California↗

On the observation, characterisation, and predictive GIS mapping of strong ground shaking for seismic zonation

Tragic earthquakes of the last decade in Mexico, Armenia, and the United States have re-emphasised the importance of local geologic site conditions in determining amounts of damage and consequent loss of life. Extensive data sets in the San Francisco Bay region on strong earthquake ground motions, the damage distributions from past earthquakes, and geologic materials provide the basis to quantify site condition effects for purposes of earthquake hazard mitigation. These observational data are reviewed and analysed to provide methodologies for the characterisation and predictive mapping of potential variations in strong ground shaking for seismic zonation. The methodologies are based on existing geologic maps. They provide a method for seismic zonation applicable to many urbanised seismic regions of the world.

California↗

The Marina District, San Francisco, California: Geology, history, and earthquake effects

A northwest-trending valley in the bedrock surface is buried by firm Pleistocene bay clay, a dense Pleistocene sand layer, soft Holocene bay sediments, loose to dense Holocene beach and dune sands, and artificial fill that have an aggregate maximum thickness of about 90 m (300 ft). Artificial filling of a cove at the site of The Marina District proceeded gradually from the late 1860s to 1912, when major hydraulic filling was done for the Panama-Pacific International Exposition. The remains of thousands of piles driven for the Exposition very probably still exist and have had unknown effects on long-term ground settlement and earthquake-related ground displacements. Intensity maps of the 1906 earthquake, and seismic recordings and severe building damage in 1989, reported by others, indicate that ground motion was amplified on both natural and artificial ground. This suggests that the configuration of the bedrock surface and the location and thickness of various clay and sand deposits underlying the fill had an important effect on the shaking. However, most of the settlement and liquefaction and the damage to pipelines, building foundations, streets, side-walks, and curbs occurred in areas of artificial fill consisting mainly of loose sand.

California↗

Surface displacements in the 1906 San Francisco and 1989 Loma Prieta earthquakes

The horizontal displacements accompanying the 1906 San Francisco earthquake and the 1989 Loma Prieta earthquake are computed from geodetic survey measurements. The 1906 earthquake displacement field is entirely consistent with right-lateral strike slip on the San Andreas fault. In contrast, the 1989 Loma Prieta earthquake exhibited subequal components of strike slip and reverse faulting. This result, together with other seismic and geologic data, may indicate that the two earthquakes occurred on two different fault planes.

California↗

Suspended sediment transport under estuarine tidal channel conditions

A modified version of the GEOPROBE tripod has been used to monitor flow conditions and suspended sediment distribution in the bottom boundary layer of a tidal channel within San Francisco Bay, California. Measurements were made every 15 minutes over three successive tidal cycles. They included mean velocity profiles from four electromagnetic current meters within 1 m of the seabed; mean suspended sediment concentration profiles from seven miniature nephelometers operated within 1 m of the seabed; near-bottom pressure fluctuations; vertical temperature gradient; and bottom photographs. Additionally, suspended sediment was sampled from four levels within 1 m of the seabed three times during each successive flood and ebb cycle. While the instrument was deployed, STD-nephelometer measurements were made throughout the water column, water samples were collected each 1–2 hours, and bottom sediment was sampled at the deployment site. From these measurements, estimates were made of particle settling velocity ( w s ) from size distributions of the suspended sediment, friction velocity (U * U ∗ "> ) from the velocity profiles, and reference concentration ( C a ) was measured at z = 20 cm. These parameters were used in the suspended sediment distribution equations to evaluate their ability to predict the observed suspended sediment profiles. Three suspended sediment particle conditions were evaluated: (1) individual particle size in the 4–11 φ (62.5-0.5 μm) range with the reference concentration C a at z = 20 cm ( C φ ), (2) individual particle size in the 4–6 φ size range, flocs representing the 7–11 φ size range with the reference concentration C a at z = 20 cm ( C f ), and (3) individual particle size in the 4–6 φ size range, flocs representing the 7–11 φ size range with the reference concentration predicted as a function of the bed sediment size distribution and the square of the excess shear stress. In addition, computations of particle flux were made in order to show vertical variations in horizontal mass flux for varying flow conditions.

California↗

The ecology of the soft-bottom benthos of San Francisco Bay: a community profile

This profile, part of a series of profiles concerning coastal habitats of the United States, is a detailed examination of the soft-bottom benthos of San Francisco Bay. A U.S. Fish and Wildlife Service and California Department of Fish and Game report (1979) entitled "Protection and Restoration of San Francisco Bay Fish and Wildlife Habitat" provides clear recognition of the importance of intertidal and subtidal soft-bottom habitats and their associated organisms to the bay's birds and fishes and to the overall functioning of the estuary. The purpose of this profile is to provide a description of the structure and functioning of the benthic community in San Francisco Bay (exclusive of its tidal marshes, which are discussed by M. Josselyn [1983] in another profile). The habitats covered in this volume include all nonvegetated soft-bottom intertidal and subtidal areas of the bay between the Golden Gate and the mouths of the Sacramento and San Joaquin Rivers to the northeast, and to the southern extremity of the bay. The profile provides a reference to the scientific information concerning the animals and plants of the bay's benthic communities, their importance to the bay ecosystem, and their value as a resource measured in human terms. Because there have been few process-oriented studies of the benthos of San Francisco Bay (e.g., field and laboratory rate-measurement experiments), the material presented herein is largely descriptive. Nonetheless, we have described the processes that interconnect the various physical, chemical, and biological components of the benthic environment, and the important couplings between this environment and the water column above, with reference to research results from other estuaries where necessary. We consider the role of the benthic community as a food source for fish, aquatic birds, and humans; as a consumer or degrader of organic materials including wastes; as a recycler of minerals and nutrients; and as an accumulator of pollutants.

California↗

Phytoplankton growth rates in a light-limited environment, San Francisco Bay

Phytoplankton cells reside in a turbulent medium partitioned into an upper photic zone that sustains photosynthesis, and a lower aphotic zone that does not. In estuaries, vertical mixing rates between these 2 zones can be rapid (< 1 generation time) because of tidal stirring and because the mixing depth is generally shallow. Moreover, the photic depth is characteristically shallow in estuaries because of the high seston concentrations that typify these systems (e.g. Cloern 1987). Hence the mean light exposure of phytoplankton cells, and their rates of photosynthesis and growth in estuaries, should be related to the ratio of photic depth Z p to mixing Z m , (defined as either the water column depth, or the surface layer depth in a stratified estuary). Grobbelar (1985) has measured phytoplankton production in turbid waters and used the ratio Z p :Z m as a simple index to quantify the degree of light limitation. Harris and his colleagues have examined in detail the importance of the Z p :Z m ratio in lakes for influencing variability of phytoplankton production and photosynthetic parameters (Harris et al. 1980), and variability of species composition both temporally (Harris & Piccinin 1980) and spatially (Haffner et al. 1980). Phytoplankton growth rates have only rarely been measured in estuaries (Malone 1977, Furnas 1982, Harding et al. 1986) where cycling rates between the photic and aphotic zones can be much faster than in lakes or the open ocean. This study was motivated by the need for quantitative measures of phytoplankton population growth rate in an estuarine environment, and was designed around the presumption that growth rates can be related empirically to light exposure. We conducted the study in San Francisco Bay (California, USA), which has large horizontal gradients in light availability (Z p :Z m ) typical of many coastal plain estuaries, and nutrient concentrations that often exceed those presumed to limit phytoplankton growth (Cloern et al. 1985). We tested the hypothesis that light availability is the primary control of phytoplankton growth, and that previous estimates of growth rate based on the ratio of productivity to biomass (Cloern et al. 1985) are realistic. Specifically, we wanted to verify that growth rate varies spatially along horizontal gradients of light availability indexed as Z p :Z m , such that phytoplankton turnover rate is rapid in shallow clear areas (high Z p :Z m ) and slow in deep turbid areas (low Z p :Z m ). We used an in situ incubation technique which simulated vertical mixing, and measured both changes in cell number and carbon production as independent estimates of growth rate across a range of Z p :Z m ratios.

California↗