Search USGS⌕ Search

Geology topics

Research about Routt County, Colorado

Source-linked reports with geographic coverage including Routt County, Colorado.

6 recordsLinked to original sources

Geomorphic, hydrologic, and erosion data for selected reclaimed hillslopes, the Seneca II mine, Routt County, Colorado, October 1988-July 1990

Geomorphic, hydrologic, and erosion data were collected from five reclaimed hillslopes at the Seneca II mine near Hayden, Colorado. Hillslope surveys were used to determine hillslope lengths, which range from 670 to 1,280 ft, and hillslope gradients, which range from 0.17 to 0.23 ft/ft (17 to 23 percent). Elevations in the study area range from 6,890 to 7,140 feet and hillslope aspect generally is west or south. Mean total vegetation cover ranges from 74 to 91 percent. Total monthly precipitation for December 1988 through May 1990 was computed from daily measurements made with weighing-bucket precipitation gages. Several snowpack measurements were made during 2 winters. Volumetric soil-water content was determined at incremental depths using a neutron probe and in the upper 11.8 in of soil using a time-domain reflectometer. Active and recent soil erosion was indicated by the presence of rills. Rill density (the sum of rill lengths/unit area) was computed at 50-feet intervals along each hillslope study area. Differences in soil-surface elevations between September or October 1989 and June 1990 were determined with an erosion frame and replicate soil-surface surveys at 16 erosion-study plots.

Colorado↗

Coal resources of the Fish Creek EMRIA site, Routt County, Colorado

The Fish Creek EMRIA site, an area of about 3.7 square miles (9.6 km2), is located in the southeastern part of the Yampa coal field on the steep to gently dipping beds of the Upper Cretaceous Williams Fork Formation. The Fish Creek coal bed within 200 feet (60 m) of the surface was evaluated by five core holes. Coal resources--measured, indicated, and inferred--within the site are 2,512,000 short tons, 7,970,000 short tons, and 507,000 short tons respectively. The coal has an apparent rank of bituminous C. The average Btu value of three core samples from the site on the as-received basis is 10,790, average ash content is 11.1 percent, and average sulfur content is 1.9 percent. A comparison of the analyses of samples from the Fish Creek coal bed with other Rocky Mountain province coal sample analyses shows that nitrogen, total sulfur, and pyritic and organic sulfur contents are noticeably higher in the Fish Creek coal bed samples. A comparison of other element analyses shows that the Fish Creek coal bed is noticeably higher in As, Cr, F, Fe, Hg, and Sr, and noticeably lower in Th.

Colorado↗