Search USGSSearch

Geology topics

Research about Oso, Washington

Source-linked reports with geographic coverage including Oso, Washington.

8 recordsLinked to original sources

Shear surface undulations modulate clayey gouge strength and contribute to divergent landslide acceleration

Landslides display a spectrum of speeds for incompletely known reasons. Sliding occurs along slickensided undulatory shear surfaces within boundary shear gouge. Laboratory tests reveal that gouge shear strength generally decreases with finite cumulative displacement during relatively rapid failure and may increase or decrease with increasing shear rate; these behaviors can result in accelerating or decelerating landslide motion, which significantly affects consequent hazards. However, mechanisms responsible for such behaviors are poorly understood. We performed advanced ring shear strength testing that revealed such variable strength of a landslide near Oso, Washington, USA. We hypothesized that millimeter-scale undulations along shear surfaces caused the strength variability by imparting shear strength but while also modifying stresses that locally increase and decrease the typically considered particle-scale shear strength. We tested our hypotheses in the laboratory and with finite element soil deformation modeling. Lab results suggest that undulations contribute strength that decays with finite cumulative displacement. Modeling similarly reveals this, and that rapid shearing across undulations locally reduces effective normal stress by persistently elevating pore-water pressure and causing dilation. Consequent effects on strength differ by material with granular-rich, high-friction gouge losing strength and clay-rich, low-friction gouge losing little or gaining strength as shear rates increase. Ample testing by others reveals similar patterns. Hence, the propensity for gouge-controlled accelerating or decelerating failure may be estimated from simple index tests. Our findings on the effects of undulations reveal previously unknown mechanisms that may help to explain why some landslides reactivate catastrophically while others do not.

Washington

Landslide disparities, flume discoveries, and Oso despair

Landslide dynamics is the branch of science that seeks to understand the motion of landslides by applying Newton's laws. This memoir focusses on a 40‐year effort to understand motion of highly mobile—and highly lethal—landslides such as debris avalanches and debris flows. A major component of this work entailed development and operation of the U.S. Geological Survey debris flow flume, a unique, large‐scale experimental facility in Oregon. Experiments there yielded new insights that informed development of mathematical models that were aimed not only at explaining landslide dynamics but also at evaluating landslide and debris flow hazards. The most sophisticated of these models, called D‐Claw, found its first practical application during investigations of the 2014 Oso, Washington, landslide disaster. That event provided indelible lessons about the utility and sociology of science in the real world.

Washington

Discussion of “Case study: Oso, Washington, landslide of March 22, 2014-Material properties and failure mechanism” by Timothy D. Stark, Ahmed K. Baghdady, Oldrich Hungr, and Jordan Aaron

The original paper discusses factors that may have contributed to the occurrence and long runout of a disastrous landslide near the community of Oso, Washington, on March 22, 2014. The paper reinforces a prior finding that the long runout likely resulted from liquefaction of wet colluvium that was rapidly loaded by landslide debris impinging from upslope ( Iverson et al. 2015 ). However, the original paper proposes a landslide geometry and chronology that differ from those presented in previous reports, and these differences have implications for interpreting the landslide’s mechanics. The paper also includes factual errors as well as misrepresentations that result from selective inclusion and exclusion of findings previously reported by others. The purposes of this discussion are to place the original paper in context and to rectify some of its mistakes.

Washington

Discussion of “Oso, Washington, landslide of March 22, 2014: Dynamic analysis” by Jordan Aaron, Oldrich Hungr, Timothy D. Stark, and Ahmed K. Baghdady

The original paper under discussion states that it “explains the spectacular mobility of the 2014 Oso landslide.” It addresses this objective by using two versions of the DAN model to compute the distribution of deposits produced by the landslide. The main purpose of this discussion is to demonstrate that the authors’ model is incapable of explaining the Oso landslide’s mobility—even though the model can be tuned to mimic the landslide’s distribution of deposits. An ancillary purpose is to contrast the authors’ model with the Oso landslide model of Iverson et al. (2015) and Iverson and George (2016), and to rebut false statements that the authors made about that model.

Washington

Geomorphic response of the North Fork Stillaguamish River to the State Route 530 landslide near Oso, Washington

On March 22, 2014, the State Route 530 Landslide near Oso, Washington mobilized 8 million cubic meters of unconsolidated Pleistocene material, creating a valley‑spanning deposit that fully impounded the North Fork Stillaguamish River. The river overtopped the 8-meter high debris impoundment within 25 hours and began steadily incising a new channel through the center of the deposit. Repeat topographic surveys, sediment transport measurements, bedload transport models, and observations of downstream channel change were used to document the establishment of that new channel through the landslide and assess the potential for downstream aggradation or channel change that might increase downstream flood hazards. Efficient erosion of the landslide deposit, associated with the steep knickzone formed by the downstream edge of the deposit, resulted in the re-establishment of a 20–40 meters wide, deeply inset channel through the entire deposit by May 2014, 2 months after the landslide. The mean water-surface elevation of the channel through the landslide decreased 7 meters during that 2-month period, and was about 1 meter above the pre-landslide profile in July 2014. The 2014–15 flood season, which included flows near the 0.5 annual exceedance probability discharge (2-year flood), widened the channel tens of meters, and further lowered the water-surface profile 0.5 meter. The planform position evolved slowly as a result of 5–20-meter high banks predominantly composed of clay-rich, cohesive lacustrine material. Erosion of the landslide deposit delivered a total of 820 thousand metric tons of sediment to the North Fork Stillaguamish River over the 18 months following the landslide. The sediment delivery from the deposit was predominantly fine grained: 77 percent (by mass) of the eroded material was silt or clay (less than 0.063 millimeter [mm]), 19 percent sand (0.063–2 mm), and 4 percent pebbles and cobbles (greater than 2 mm). Over the 18 months following the landslide, the bedload at a site 5 kilometers downstream of the landslide was estimated to be 310±65 thousand metric tons, and the suspended load at that same site was estimated to be 990±110 thousand metric tons. These loads represent the combined input from the landslide and ambient upstream sources; over the study interval, landslide sediment made up about 20–40 percent of the bedload, and 65–85 percent of the suspended-sediment load at this site. At a site 70 kilometers downstream of the landslide, near the mouth of the main‑stem Stillaguamish River, suspended sediment loads were estimated to be about 1,440 thousand metric tons, of which about 600 thousand metric tons, or 30 percent, likely was derived from the landslide. The mass of landslide sediment in suspension at the mouth of the river, and the timing of arrival of that sediment, indicates that about 70 percent of the landslide sediment eroded during the study period was quickly transported through the entire basin, exiting into Puget Sound within weeks of initial entrainment. Empirical bedload transport equations, in conjunction with surficial grain-size data and output from a one‑dimensional hydraulic model, were used to estimate spatial trends in bedload transport capacity, highlighting areas where reach-scale conditions would be most likely to promote deposition of coarse landslide sediment. Transport capacities decreased sharply over a reach about 5 kilometers downstream of the landslide and remained relatively low over the next 10 kilometers downstream. However, the magnitude of calculated transport capacities are large relative to the coarse sediment input from the landslide, suggesting that substantial deposition of landslide sediment was not likely to occur. These assessments were corroborated by observations of channel change, which indicated that the downstream channel response to the landslide was modest and short-lived. The most pronounced downstream effects included a wedge of aggradation just downstream of the landslide, about 1 meter high and extending a kilometer downstream, and a 0.3-meter pulse of aggradation observed 5 kilometers downstream of the landslide. In both locations, peak aggradation and channel response occurred within about a month of the landslide, and both sites had largely recovered to pre-landslide conditions by July 2014. No substantial channel change clearly linked to the landslide was observed after July 2014 except for a modest fining of surficial gravel size distributions and continued recovery and incision of the reach just downstream of the landslide. The muted downstream response of the North Fork Stillaguamish River to the State Route 530 Landslide primarily can be attributed to the cohesive, silt- and clay-rich material that bounded most of the new channel. Although the river efficiently incised a new channel through the deposit, subsequent rates of lateral erosion were slowed by the tall, cohesive banks, limiting the total volume of sediment delivery. Once entrained, however, most landslide material was rapidly transported downstream in suspension with little geomorphic effect. Landslide material coarse enough to travel as bedload was predominantly sand and fine gravel, and sediment transport models and observations of downstream change indicated that the rate of coarse sediment delivery from the landslide did not exceed the rivers ability to transport that material. The generally muted downstream response to sediment delivery from the State Route 530 Landslide, as well as the mechanics of that delivery and response, were generally consistent with observations made following the intentional removal of constructed dams. The rate and efficiency of erosion from the landslide decreased over the period of analysis, as the new channel approached a quasi-equilibrium form. In the absence of additional hillslope activity, rates of erosion from the landslide are likely to be small compared to those over the first 18 months after the landslide. The modest channel response to the highest rates of sediment delivery, and rapid recovery thereafter, indicate that the river should be able to convey the continued supply of landslide-derived sediment effectively with little effect on the downstream morphology and flood risks.

Washington

Modelling landslide liquefaction, mobility bifurcation and the dynamics of the 2014 Oso disaster

Some landslides move slowly or intermittently downslope, but others liquefy during the early stages of motion, leading to runaway acceleration and high-speed runout across low-relief terrain. Mechanisms responsible for this disparate behaviour are represented in a two-phase, depth-integrated, landslide dynamics model that melds principles from soil mechanics, granular mechanics and fluid mechanics. The model assumes that gradually increasing pore-water pressure causes slope failure to nucleate at the weakest point on a basal slip surface in a statically balanced mass. Failure then spreads to adjacent regions as a result of momentum exchange. Liquefaction is contingent on pore-pressure feedback that depends on the initial soil state. The importance of this feedback is illustrated by using the model to study the dynamics of a disastrous landslide that occurred near Oso, Washington, USA, on 22 March 2014. Alternative simulations of the event reveal the pronounced effects of a landslide mobility bifurcation that occurs if the initial void ratio of water-saturated soil equals the lithostatic, critical-state void ratio. They also show that the tendency for bifurcation increases as the soil permeability decreases. The bifurcation implies that it can be difficult to discriminate conditions that favour slow landsliding from those that favour liquefaction and long runout.

Washington

Landslide mobility and hazards: implications of the 2014 Oso disaster

Landslides reflect landscape instability that evolves over meteorological and geological timescales, and they also pose threats to people, property, and the environment. The severity of these threats depends largely on landslide speed and travel distance, which are collectively described as landslide &ldquo;mobility&rdquo;. To investigate causes and effects of mobility, we focus on a disastrous landslide that occurred on 22 March 2014 near Oso, Washington, USA, following a long period of abnormally wet weather. The landslide's impacts were severe because its mobility exceeded that of prior historical landslides at the site, and also exceeded that of comparable landslides elsewhere. The &sim;8&times;10 6 m 3 landslide originated on a gently sloping (<20&deg;) riverside bluff only 180 m high, yet it traveled across the entire &sim;1 km breadth of the adjacent floodplain and spread laterally a similar distance. Seismological evidence indicates that high-speed, flowing motion of the landslide began after about 50 s of preliminary slope movement, and observational evidence supports the hypothesis that the high mobility of the landslide resulted from liquefaction of water-saturated sediment at its base. Numerical simulation of the event using a newly developed model indicates that liquefaction and high mobility can be attributed to compression- and/or shear-induced sediment contraction that was strongly dependent on initial conditions. An alternative numerical simulation indicates that the landslide would have been far less mobile if its initial porosity and water content had been only slightly lower. Sensitive dependence of landslide mobility on initial conditions has broad implications for assessment of landslide hazards.

Washington

Preliminary interpretation of pre-2014 landslide deposits in the vicinity of Oso, Washington

High-resolution topographic surveys allow fairly precise mapping of landslide deposits and their relative ages. Relative ages are determined by cross-cutting relations and the amount of smoothing—more smoothed slide deposits are older—of these deposits. The Tulalip Tribes, in partnership with the Puget Sound Lidar Consortium, acquired a high-resolution lidar (light detection and ranging) survey of the North Fork Stillaguamish River valley in 2013. This report presents a preliminary interpretation of the topography of this area using the lidar data at a scale of 1:24,000.

Washington