Search USGS⌕ Search

Geology topics

Research about Oklahoma

Source-linked reports with geographic coverage including Oklahoma.

At least 127 records · Page 7Linked to original sources
USGS2017

Geologic map of the Fittstown 7.5΄ quadrangle, Pontotoc and Johnston Counties, Oklahoma

This 1:24,000-scale geologic map includes new geologic mapping as well as compilation and revision of previous geologic maps in the area. Field investigations were carried out during 2009–2011 that included mapping and investigations of the geology and hydrology of the Chickasaw National Recreation Area, Oklahoma, west of the map area. The Fittstown quadrangle is in Pontotoc and Johnston Counties in south-central Oklahoma, which is in the northeastern part of the Arbuckle Mountains. The Arbuckle Mountains are composed of a thick sequence of Paleozoic sedimentary rocks that overlie Lower Cambrian and Precambrian igneous rocks; these latter rocks are not exposed in the quadrangle. From Middle to Late Pennsylvanian time, the Arbuckle Mountains region was folded, faulted, and uplifted. Periods of erosion followed these Pennsylvanian mountain-building events, beveling this region and ultimately developing the current subtle topography that includes hills and incised uplands. The southern and northwestern parts of the Fittstown quadrangle are directly underlain by Lower Ordovician dolomite of the Arbuckle Group that has eroded to form an extensive, stream-incised upland containing the broad, gently southeast-plunging, Pennsylvanian-age Hunton anticline. The northeastern part of the map area is underlain by Middle Ordovician to Pennsylvanian limestone, shale, and sandstone units that predominantly dip northeast and form the northeastern limb of the Hunton anticline; this limb is cut by steeply dipping, northwest-southeast striking faults of the Franks fault zone. This limb and the Franks fault zone define the southwestern margin of the Franks graben, which is underlain by Pennsylvanian rocks in the northeast part of the map area.

Oklahoma↗
USGS2016

Mapping annual forest cover in sub-humid and semi-arid regions through analysis of landsat and PALSAR imagery

Accurately mapping the spatial distribution of forests in sub-humid to semi-arid regions over years is a challenging task and causes difficulty to forest management. Relatively large uncertainties still exist in the spatial distribution of forests and deforestation in the sub-humid and semi-arid regions. Numerous publications have used either optical or synthetic aperture radar (SAR) remote sensing imagery, but the resultant forest cover maps often have large errors. In this study, we proposed a pixel- and rule-based algorithm to identify and map annual forests from 2007 to 2010 in Oklahoma, USA, a transition region with various climate and landscapes, using the integration of the L-band ALOS PALSAR Fine Beam Dual Polarization (FBD) mosaic dataset and Landsat images. The overall accuracy and Kappa coefficient of the PALSAR/Landsat forest map were about 88.2% and 0.75 in 2010, with the user and producer accuracy about 93.4% and 75.7%, based on the 3,270 random ground plots collected in 2012 and 2013. Compared with the forest products from JAXA, NLCD, OKESM and OKFRA, the PALSAR/Landsat forest map showed great improvement. The area of the PALSAR/Landsat forest was about 40,149 km2 in 2010, which was close to the area from OKFRA (40,468 km2), but much larger than those from JAXA (32,403 km2) and NLCD (37,628 km2). We analyzed annual forest cover dynamics, and the results show extensive deforestation (2,761 km2, 6.9% of the total forest area in 2010) and reforestation (3,630 km2, 9.0%) in the southeast and central Oklahoma, and the total area of forests increased by 684 km2 from 2007 to 2010. This study clearly demonstrates the potential of data fusion between PALSAR and Landsat images for mapping annual forest cover dynamics in sub-humid to semi-arid regions, and the resultant forest maps would be helpful to forest management.

Oklahoma↗
USGS2016

Geologic and geophysical models for Osage County, Oklahoma, with implications for groundwater resources

This report summarizes a three-dimensional (3-D) geologic model that was constructed to provide a framework to investigate groundwater resources of the Osage Nation in northeastern Oklahoma. This report also presents an analysis of an airborne electromagnetic (AEM) survey that assessed the spatial variation of electrical resistivity to depths as great as 300 meters in the subsurface. The report and model provide support for a countywide assessment of groundwater resources, emphasizing the Upper Pennsylvanian rock units in the shallow subsurface of central and eastern Osage County having electrical resistivity properties that may indicate aquifers. Surface outcrops and subsurface stratigraphic picks on wire-line geophysical logs of Upper Pennsylvanian–Lower Permian sedimentary rock were used to construct a 3-D model of the geologic subsurface as an aid for evaluating groundwater resources in Osage County. Quaternary alluvium and terraces along major streams and the Arkansas River are included in the geologic framework model. Data from the AEM survey were subjected to quality-control procedures, truncated at depth of investigation (DOI), and then used to build a 3-D electrical resistivity model making use of secondary and tertiary interpolation profiles between primary data profiles. The AEM data highlight westward-inclined resistivity gradients that parallel the shallow dip of bedrock strata; bodies have resistivity >30 ohm-meters, and extend as much as 10 kilometers (km) down the dip of host geologic units. Volume analysis and internal imaging of an integrated 3-D geology and electrical resistivity model give a proxy for likely aquifer units with large relative volumes of high resistivity: Quaternary alluvium, Elgin Sandstone Lentil in the upper part of the Vamoosa Group, Tallant Formation, and parts of a combined Wann-Iola-Chanute Formation. Less voluminous, high-resistivity bodies correspond to intervals in the lower part of the Vamoosa Group in the east-central part of the county and probable limestone intervals in the upper part of the Vanoss Group in the northwest part of the county. Northwestern and eastern troughs of potable water previously defined for central Osage County generally correspond to down-dip projections of high-resistivity bodies associated with the Elgin Sandstone Lentil of the Vamoosa Group and Tallant Formation, respectively.

Oklahoma↗
USGS2016

Using hierarchical Bayesian multi-species mixture models to estimate tandem hoop-net based habitat associations and detection probabilities of fishes in reservoirs

Species distribution models are useful tools to evaluate habitat relationships of fishes. We used hierarchical Bayesian multispecies mixture models to evaluate the relationships of both detection and abundance with habitat of reservoir fishes caught using tandem hoop nets. A total of 7,212 fish from 12 species were captured, and the majority of the catch was composed of Channel Catfish Ictalurus punctatus (46%), Bluegill Lepomis macrochirus (25%), and White Crappie Pomoxis annularis (14%). Detection estimates ranged from 8% to 69%, and modeling results suggested that fishes were primarily influenced by reservoir size and context, water clarity and temperature, and land-use types. Species were differentially abundant within and among habitat types, and some fishes were found to be more abundant in turbid, less impacted (e.g., by urbanization and agriculture) reservoirs with longer shoreline lengths; whereas, other species were found more often in clear, nutrient-rich impoundments that had generally shorter shoreline length and were surrounded by a higher percentage of agricultural land. Our results demonstrated that habitat and reservoir characteristics may differentially benefit species and assemblage structure. This study provides a useful framework for evaluating capture efficiency for not only hoop nets but other gear types used to sample fishes in reservoirs.

Oklahoma↗
USGS2016

Summary of U.S. Geological Survey studies conducted in cooperation with the Citizen Potawatomi Nation, central Oklahoma, 2011–14

The U.S. Geological Survey conducted hydrologic studies and published three U.S. Geological Survey scientific investigations reports in cooperation with the Citizen Potawatomi Nation from 2011 to 2014 to characterize the quality and quantity of water resources. The study areas of those reports consisted of approximately 960 square miles in parts of three counties in central Oklahoma. This study area has multiple abundant sources of water, being underlain by three principal aquifers (alluvial/terrace, Central Oklahoma, and Vamoosa-Ada), being bordered by two major rivers (North Canadian and Canadian), and having several smaller drainages including the Little River in the central part of the study area and Salt Creek in the southeastern part of the study area. The Central Oklahoma aquifer (also referred to as the “Garber-Wellington aquifer”) underlies approximately 3,000 square miles in central Oklahoma in parts of Cleveland, Logan, Lincoln, Oklahoma, and Pottawatomie Counties and much of the study area. Water from these aquifers is used for municipal, industrial, commercial, agricultural, and domestic supplies. Much of the water in the study area is of good quality; however, in some parts of this area water quality was impaired by very hard surface water and groundwater, large chloride concentrations in some smaller streams, relatively large concentrations of nitrogen and phosphorus nutrients and large counts of fecal-indicator bacteria in the North Canadian River, and uranium concentrations that exceeded the U.S. Environmental Protection Agency Maximum Contaminant Level of 30 micrograms per liter for public water supplies in water samples collected from a small number of wells. Most stream-water samples collected from the Little River by the U.S. Geological Survey in 2012–13 had dissolved solids concentrations exceeding the U.S. Environmental Protection Agency Secondary Maximum Contaminant Level for public water supplies of 500 milligrams per liter. Larger numbers of organic compounds were measured in water samples collected from the North Canadian River than the Little River. Numerical groundwater-flow models were created to characterize flow systems in aquifers underlying this study area and areas of particular interest within the study area. Those models were used to estimate sustainable groundwater yields from parts of the North Canadian River alluvial aquifer, characterize groundwater/surface-water interactions, and estimate the effects of a 10-year simulated drought on streamflows and water levels in alluvial and bedrock aquifers. Pumping of wells at the Iron Horse Industrial Park was estimated to cause negligible infiltration of water from the adjoining North Canadian River. A 10-year simulated drought of 50 percent of normal recharge was tested for the period 1990–2000. For this period, the total amount of groundwater in storage was estimated to decrease by 8.6 percent in the North Canadian River alluvial aquifer and approximately 0.2 percent in the Central Oklahoma aquifer, and groundwater flow to streams was estimated to decrease by 28–37 percent. This volume of groundwater loss showed that the Central Oklahoma aquifer is a bedrock aquifer that has relatively low rates of recharge from the land surface. The simulated drought decreased simulated streamflow, composed of base flow, in the North Canadian River at Shawnee, Okla., which did not recover to predrought conditions until the relatively wet year of 2007 after the simulated drought period.

Oklahoma↗
USGS2016

Hydrogeological framework, numerical simulation of groundwater flow, and effects of projected water use and drought for the Beaver-North Canadian River alluvial aquifer, northwestern Oklahoma

This report describes a study of the hydrology, hydrogeological framework, numerical groundwater-flow models, and results of simulations of the effects of water use and drought for the Beaver-North Canadian River alluvial aquifer, northwestern Oklahoma. The purpose of the study was to provide analyses, including estimating equal-proportionate-share (EPS) groundwater-pumping rates and the effects of projected water use and droughts, pertinent to water management of the Beaver-North Canadian River alluvial aquifer for the Oklahoma Water Resources Board. The Beaver-North Canadian River alluvial aquifer consists of unconsolidated sand, gravel, silt, and clay in varying proportions that underlies the Beaver and North Canadian River Valleys for approximately 175 miles (mi) from the Oklahoma Panhandle to the western edge of Oklahoma City in central Oklahoma. The aquifer as delineated for this study varies from 4 to 12 mi wide and is as thick as 308 feet (ft) in the northwest where the aquifer includes the Ogallala Formation. There are two distinct but in most areas hydraulically connected alluvial units that compose the Beaver-North Canadian River alluvial aquifer: a Quaternary-age topographically higher terrace deposit and a topographically lower, younger alluvium along the active river channel that includes active and Quaternary-age alluvium. The Beaver River composes the headwaters of the North Canadian River, which begins at the confluence of the Beaver River and Wolf Creek. The aquifer is divided for water management into two geographic areas: Reach I upstream from Canton Dam and Reach II downstream from Canton Dam. Reach I covers an area of approximately 874 square miles (mi 2 ), and Reach II covers an area of approximately 371 mi 2 . The Beaver-North Canadian River alluvial aquifer crosses several climatic zones, from semiarid in the west to continental subhumid in the east. Mean annual precipitation varies from 23.5 inches (in.) in the western part of this aquifer to 35.7 in. in the east. Surface-water demands were met through numerous temporary and permanent surface-water diversions from the Beaver and North Canadian Rivers during the period of study. During the study period, seven diversions removed a mean annual 2,000 acre-feet (acre-ft) of water from Reach I. There were 14 diversions from Reach II with a mean annual permitted volume of approximately 81,000 acre-ft, including diversion into the Lake Hefner Canal for the Oklahoma City public water supply. During the period of this study, 17 temporary surface-water diversion permits were active in Reach I, with total permitted volumes of 2,000 acre-ft, and 41 diversions were active in Reach II, with total permitted volumes of 38,000 acre-ft. The total water use for each temporary permit was assumed to be taken over the 3-month period allotted to temporary withdrawal permits. The groundwater-use analysis full period of record, 1967–2011, was divided into two sub-intervals because of varying water use, 1970–80 and 1981–2011. Groundwater use in Reach I and Reach II was substantially greater from 1970 to 1980 compared to the rest of the period, and the sub-period 1981–2011 was used because this period includes recent population growth and modern irrigation methods. The total mean annual groundwater use in Reach I was 15,309 acre-feet per year (acre-ft/yr) during 1967–2011; 20,724 acre-ft/yr during 1970–80, and 13,739 acre-ft/yr during 1981–2011. Total mean annual groundwater use in Reach II was similar but slightly less than in Reach I, with 14,098 acre-ft/yr during 1967–2011; 19,963 acre-ft/yr during 1970–80; and 12,285 acre-ft/yr during 1981–2011. Irrigation composed 72 percent of groundwater use in Reach I and 48 percent of groundwater use in Reach II during the 1967–2011 period. Public water supply was a much smaller proportion of total groundwater use in Reach I (15 percent) than in Reach II (39 percent). The proportion of groundwater use for power was 10 percent in Reach I and 5.2 percent in Reach II. All other water-use categories in Reach I only composed 2.2 percent of groundwater use in Reach I. In Reach II, industrial, mining, and commercial categories combined accounted for 4.4 percent of groundwater use; recreation, fish, and wildlife groundwater use accounted for 2.3 percent; and nonirrigated agriculture accounted for 1.5 percent of groundwater use. Permian-age bedrock underlies the Beaver-North Canadian River alluvial aquifer. In the east, the Dog Creek Shale, the Duncan Sandstone, and the Blaine and Chickasha Formations, none of which are notable sources of groundwater in the study area, underlie the Beaver-North Canadian River alluvial aquifer. In the northwestern part of Reach I, bedrock is composed of the Rush Springs and Marlow Formations, which are productive aquifers in some areas. The Cloud Chief Formation is not a source of groundwater. One hydrogeological unit was delineated in the Beaver-North Canadian River alluvial aquifer, composed of the terrace deposits and alluvium, with limited flow between this unit and bedrock units. Groundwater in this aquifer generally flows from northwest to southeast and across the aquifer toward the Beaver and North Canadian Rivers. Groundwater recharge from precipitation was estimated for the entire Beaver-North Canadian River alluvial aquifer and then itemized for both reaches by using a soil-water-balance (SWB) model. At two locations in Reach I, a water-table fluctuation method was used to estimate local recharge. Total mean annual groundwater recharge from the soil-water-balance method was estimated to be approximately 136,400 acre-ft in Reach I and 82,400 acre-ft in Reach II; the mean annual recharge for both reaches combined was approximately 218,800 acre-ft. Two sites in Reach I located at observation wells with continuous water-level measurements and nearby streamflow-gaging stations with precipitation gages were used to estimate the percentage of precipitation that becomes groundwater recharge. The Woodward site was located at observation well OW-4 near the Woodward, Okla. (07237500), streamflow-gaging station. Total precipitation and recharge for the Woodward and Seiling sites were calculated for the water year 2013. The Woodward site had a total of 14.18 in. of precipitation and 6.3 in. of recharge was calculated, equaling 44 percent of precipitation. The mean percentage of precipitation that was estimated to become recharge in the SWB model for the period 1980–2011 at that location was 9.2 percent, although adjacent SWB-model cells were as high as 20 percent of precipitation. The Seiling site had a total of 26.84 in. of precipitation during the water year 2013, and a total of 6.9 in. of recharge was estimated, equaling 25.9 percent of precipitation. At the Seiling site, the mean percentage of precipitation that became recharge in the SWB model for the period 1980–2011 was 23.0 percent. The principal inflow to the Beaver-North Canadian River alluvial aquifer was estimated to be surface recharge from precipitation, and plant evapotranspiration was estimated to be the greatest discharge, followed by stream and lake base flow, groundwater pumping, and flow to seeps and springs along the eastern margin of the aquifer. Reach I also included inflow from the High Plains aquifer as lateral inflow of groundwater, though this flow was estimated to be a very minor component of the total water budget. Most of the Beaver and North Canadian Rivers were determined to be gaining streamflow from groundwater, but several reaches in Reach I upstream from Wolf Creek were determined to be losing streamflow through infiltration to the aquifer. Aquifer hydrogeologic characteristics were estimated from borehole lithologic logs, well-construction information, and published aquifer tests and during numerical model calibration. The maximum saturated aquifer thickness in Reach I was estimated to be 308 ft, and the mean thickness was estimated to be 36 ft. The maximum saturated thickness in Reach II was estimated to be 86 ft, and the mean thickness was estimated to be 29 ft. Mean hydraulic conductivity of Reach I was estimated to be 70 feet per day (ft/d) with a range of 7–279 ft/d. Mean hydraulic conductivity in Reach II was estimated to be 92 ft/d with a range of 4–279 ft/d. Both reach models were calibrated manually by using trial-and-error adjustment of recharge, hydraulic conductivity, specific yield, and conductance of boundary conditions. The Reach I model used 28 head observations during the steady-state period of 1980 and 487 head observations during the transient period of 1981–2011. The root-mean-square error of head residuals (observed minus simulated head) was 3.86 ft, and 83 percent of head residuals were between -5 and 5 ft. The Reach II model was calibrated to 75 steady-state head observations and 134 head observations during the transient period. The root-mean-square error of head residuals for that reach was 3.58 ft, and similar to Reach I, 85 percent of residuals were between -5 and 5 ft. Several analyses were performed by using the numeric groundwater-flow models as predictive tools, including estimating the EPS pumping rate for both reaches. The EPS is defined by the Oklahoma Water Resources Board as an annual per-acre groundwater-pumping rate that will reduce saturated thickness in half of the aquifer to 5 ft or less over a period of 20 years; additional estimates were made for periods of 40 and 50 years. Other analyses included using models to estimate the effects of groundwater pumping and a prolonged drought on groundwater in storage and streamflow and lake storage of water. The EPS pumping rate was found to be approximately 0.57 acre-feet per acre per year ([acre-ft/acre]/yr) in Reach I and 0.73 (acre-ft/acre)/yr in Reach II for a 20-year period. For a 40-year period, the annual EPS pumping rate was determined to be 0.54 (acre-ft/acre)/yr in Reach I and 0.61 (acre-ft/acre)/yr in Reach II. For a 50-year period, the EPS pumping rate was determined to be 0.53 (acre-ft/acre)/yr in Reach I and 0.61 (acre-ft/acre)/yr in Reach II. Groundwater pumping at the 2011 rate for 50 years resulted in a 3.6-percent decrease in the amount of water in groundwater storage in Reach I and a decrease of 2.5 percent in the amount of groundwater in storage in Reach II. A cumulative 32-percent increase in pumping greater than the 2011 rate over a period of 50 years caused a decrease in groundwater storage of 4.0 percent in Reach I and 3.3 percent in Reach II. A hypothetical severe drought was simulated by using aquifer recharge flow rates during the drought year of 2011 for a period of 10 years. All other flows including evapotranspiration and groundwater pumping were set at estimated 2011 rates. The hypothetical drought caused a decrease in water in aquifer storage by about 7 percent in Reach I and 7 percent in Reach II. Another analysis of the effects of hypothetical drought estimated the effects of drought on streamflow and lake storage. The hypothetical drought was simulated by decreasing recharge by 75 percent for a selected 10-year period (1994–2004) during the 1980–2011 simulation. In Reach I, the amounts of water stored in Canton Lake and streamflow at the Seiling, Okla., streamflow-gaging station were analyzed. Streamflow at the Seiling station decreased by a mean of 75 percent and was still diminished by 10 percent after 2011. In Reach II, the effect of drought on the streamflow at the Yukon, Okla., streamflow-gaging station was examined. The greatest mean streamflow decrease was approximately 60 percent during the simulated drought, and after 2011, the mean decrease in streamflow was still about 5 percent. Canton Lake storage decreased by as much as 83 percent during the simulated drought and did not recover by 2011.

Oklahoma↗
USGS2016

Assessing the potential for rainbow trout reproduction in tributaries of the Mountain Fork River below Broken Bow Dam, southeastern Oklahoma

Stocked trout (Salmonidae) in reservoir tailwater systems in the Southern United States have been shown to use tributary streams for spawning and rearing. The lower Mountain Fork of the Little River below Broken Bow Dam is one of two year-round tailwater trout fisheries in Oklahoma, and the only one with evidence of reproduction by stocked rainbow trout (Oncorhynchus mykiss). Whether stocked trout use tributaries in this system for spawning is unknown. Furthermore, an inventory of the resident fish communities in these tributaries is lacking. To address these gaps, we surveyed 10 tributaries, from intermittent through third order, for fishes during presumed spawning periods of rainbow trout; we used backpack electrofishing in February and April 2015 and 2016 to determine the composition of the fish assemblages and whether trout were present. Stocked adult trout were found in three tributaries in 2015; wild juvenile rainbow trout were found in Bee Branch in 2015 and in an intermittent tributary of Spillway Creek, just above the “Cold Hole,” in 2016. Fish assemblages were dominated by highland stonerollers (Campostoma spadiceum) in larger, wider systems and by orangebelly darters (Etheostoma radiosum) in smaller, narrower streams. These data fill an information gap in our understanding of small streams in the Ouachita Mountains, and they demonstrate that some streams are suitable for rainbow trout reproduction.

Oklahoma↗
USGS2015

The petroleum geologist and the insurance policy

In a recent study, Hough and Page (2015) presented several lines of evidence suggesting that most of the significant earthquakes in Oklahoma during the twentieth century, including the M w 5.7 El Reno earthquake of 9 April 1952, were likely induced by wastewater injection and possibly secondary oil recovery operations. We undertook an archival search for accounts of this event, which unearthed a newspaper article published immediately following the El Reno earthquake regarding a prominent petroleum geologist in the area who took out a rare earthquake insurance policy less than 60 days before the earthquake struck. In this study we present a historical context for this intriguing coincidence. We present a retrospective of oil industry practices in the early‐ to mid‐twentieth century, gleaned from court records and other industry reports, that potentially bear on the interplay between oil exploration activities and earthquakes, focusing on the Oklahoma City region. We describe events of the day that could plausibly have alerted a geologist to the possibility of induced earthquakes, although there is no indication that the potential for induced earthquakes was widely recognized within the industry at that time.

Oklahoma↗
USGS2015

Reactivated faulting near Cushing, Oklahoma: Increased potential for a triggered earthquake in an area of United States strategic infrastructure

In October 2014 two moderate-sized earthquakes ( Mw 4.0 and 4.3) struck south of Cushing, Oklahoma, below the largest crude oil storage facility in the world. Combined analysis of the spatial distribution of earthquakes and regional moment tensor focal mechanisms indicate reactivation of a subsurface unnamed and unmapped left-lateral strike-slip fault. Coulomb failure stress change calculations using the relocated seismicity and slip distribution determined from regional moment tensors, allow for the possibility that the Wilzetta-Whitetail fault zone south of Cushing, Oklahoma, could produce a large, damaging earthquake comparable to the 2011 Prague event. Resultant very strong shaking levels (MMI VII) in the epicentral region present the possibility of this potential earthquake causing moderate to heavy damage to national strategic infrastructure and local communities.

Oklahoma↗
USGS2015

A century of induced earthquakes in Oklahoma?

Seismicity rates have increased sharply since 2009 in the central and eastern United States, with especially high rates of activity in the state of Oklahoma. Growing evidence indicates that many of these events are induced, primarily by injection of wastewater in deep disposal wells. The upsurge in activity has raised two questions: What is the background rate of tectonic earthquakes in Oklahoma? How much has the rate varied throughout historical and early instrumental times? In this article, we show that (1) seismicity rates since 2009 surpass previously observed rates throughout the twentieth century; (2) several lines of evidence suggest that most of the significant earthquakes in Oklahoma during the twentieth century were likely induced by oil production activities, as they exhibit statistically significant temporal and spatial correspondence with disposal wells, and intensity measurements for the 1952 El Reno earthquake and possibly the 1956 Tulsa County earthquake follow the pattern observed in other induced earthquakes; and (3) there is evidence for a low level of tectonic seismicity in southeastern Oklahoma associated with the Ouachita structural belt. The 22 October 1882 Choctaw Nation earthquake, for which we estimate Mw 4.8, occurred in this zone.

Oklahoma↗
USGS2015

Numerical simulation of groundwater flow, resource optimization, and potential effects of prolonged drought for the Citizen Potawatomi Nation Tribal Jurisdictional Area, central Oklahoma

A hydrogeological study including two numerical groundwater-flow models was completed for the Citizen Potawatomi Nation Tribal Jurisdictional Area of central Oklahoma. One numerical groundwater-flow model, the Citizen Potawatomi Nation model, encompassed the jurisdictional area and was based on the results of a regional-scale hydrogeological study and numerical groundwater flow model of the Central Oklahoma aquifer, which had a geographic extent that included the Citizen Potawatomi Nation Tribal Jurisdictional Area. The Citizen Potawatomi Nation numerical groundwater-flow model included alluvial aquifers not in the original model and improved calibration using automated parameter-estimation techniques. The Citizen Potawatomi Nation numerical groundwater-flow model was used to analyze the groundwater-flow system and the effects of drought on the volume of groundwater in storage and streamflow in the North Canadian River. A more detailed, local-scale inset model was constructed from the Citizen Potawatomi Nation model to estimate available groundwater resources for two Citizen Potawatomi Nation economic development zones near the North Canadian River, the geothermal supply area and the Iron Horse Industrial Park. Groundwater pumping rates at potential well locations were optimized using the most recent version of the U.S. Geological Survey Groundwater-Management Process for MODFLOW. The objectives of optimization were to determine if a total pumping rate of 500 gallons per minute could be pumped from 5 wells at the geothermal supply area and to maximize discharge from 16 wells at the Iron Horse Industrial Park without exceeding specified head drawdown constraints at the pumping wells and thus prevent groundwater depletion. The inset model was used to estimate North Canadian River streamflow depletion caused by optimized pumping at the Iron Horse Industrial Park because water quality was a concern, and the river may have degraded water quality compared to water in other parts of the alluvial aquifer. The fate of streamflow that infiltrates into groundwater because of pumping was not directly determined, but it was assumed that this water could end up in the well discharge, and was considered to be a maximum proportion of well discharge derived from the North Canadian River. The total optimized continuous pumping rate from five managed wells at the geothermal supply area was 638 gallons per minute, which exceeded the target pumping rate of 500 gallons per minute. The total continuous pumping rate from 16 wells at the Iron Horse Industrial Park was 1,472 gallons per minute, which induced stream infiltration of approximately 4.1 gallons per minute (approximately 0.3 percent of the total well discharge) from the North Canadian River. To estimate the effects of drought on water resources in the Citizen Potawatomi Nation Tribal Jurisdictional Area, a hypothetical 10-year drought during which precipitation would decrease by 50 percent was simulated by decreasing model groundwater recharge by the same proportion for the period 1990–2000 of the transient model. The effects of the drought were estimated by calculating the change in the volume of groundwater storage and groundwater flow to streams at the end of the drought period, and the change in simulated streamflow in the North Canadian River at the streamflow-gaging station at Shawnee, Okla., during and after the drought. The hypothetical decrease in recharge during the simulated drought caused groundwater in storage over the entire model in the study area to decrease by 361,500 acre-feet (14,100 acre-feet in the North Canadian River alluvial aquifer and 347,400 acre-feet in the Central Oklahoma aquifer), or approximately 0.2 percent of the total groundwater in storage over the drought period. This small percentage of groundwater loss showed that the Central Oklahoma aquifer as a bedrock aquifer has relatively low rates of recharge from the surface relative to the approximate storage. The budget for base flow to the North Canadian River indicated that the change in groundwater flow to the North Canadian River decreased during the 10-year drought by 386,500 acre-feet, or 37 percent. In all other parts of the Citizen Potawatomi Nation Tribal Jurisdictional Area, base flow decreased by 292,000 acre-feet, or 28 percent. Streamflow in the North Canadian River at the streamflow-gaging station at Shawnee, Okla., decreased during the hypothetical drought by as much as 28 percent, and the mean change in streamflow decreased as much as 16 percent. Streamflow at the Shawnee streamflow-gaging station did not recover to nondrought conditions until about 3 years after the simulated drought ended, during the relatively wet year of 2007.

Oklahoma↗
USGS2015

Growth and contribution of stocked channel catfish, Ictalurus punctatus (Rafinesque, 1818): the importance of measuring post-stocking performance

In this study it was sought to quantify post-stocking growth, survival, and contribution of advanced size (178 mm total length [TL]) channel catfish Ictalurus punctatus fingerlings, something rarely done. Channel catfish populations were evaluated before (May 2010) and after (May to August 2011 and 2012) stocking. Relative abundance, stocking contribution, and growth were different ( P < 0.05) in the two study impoundments (lakes Lone Chimney and Greenleaf, Oklahoma). For fish stocked in Lake Lone Chimney, stocking contribution was lower (3&ndash;35%), and average length and weight of stocked fish by age-2 reached 230 mm TL and 85 g, whereas the stocking contribution (84&ndash;98%) and growth in length (340 mm TL) and weight (280 g) were higher by age-2 in Lake Greenleaf. Given these unambiguous differences of post-stocking performance, benchmark metrics that represent population-level information such as relative abundance and average length and weight of the sample masked these significant differences, highlighting the importance of marking hatchery-fish and then following them through time to determine the effectiveness of stocking. These results suggest that stock enhancement programmes would benefit from studies that quantify post-stocking performance of hatchery fish.

Oklahoma↗
USGS2015

Earthquake hypocenters and focal mechanisms in central Oklahoma reveal a complex system of reactivated subsurface strike-slip faulting

The sharp increase in seismicity over a broad region of central Oklahoma has raised concern regarding the source of the activity and its potential hazard to local communities and energy industry infrastructure. Since early 2010, numerous organizations have deployed temporary portable seismic stations in central Oklahoma in order to record the evolving seismicity. In this study, we apply a multiple-event relocation method to produce a catalog of 3,639 central Oklahoma earthquakes from late 2009 through 2014. RMT source parameters were determined for 195 of the largest and best-recorded earthquakes. Combining RMT results with relocated seismicity enabled us to determine the length, depth and style-of-faulting occurring on reactivated subsurface fault systems. Results show that the majority of earthquakes occur on near vertical, optimally oriented (NE-SW and NW-SE), strike-slip faults in the shallow crystalline basement. These are necessary first order observations required to assess the potential hazards of individual faults in Oklahoma.

Oklahoma↗
USGS2015

Efforts to monitor and characterize the recent increasing seismicity in central Oklahoma

The sharp increase in seismicity over a broad region of central Oklahoma has raised concerns regarding the source of the activity and its potential hazard to local communities and energy-industry infrastructure. Efforts to monitor and characterize the earthquake sequences in central Oklahoma are reviewed. Since early 2010, numerous organizations have deployed temporary portable seismic stations in central Oklahoma to record the evolving seismicity. A multiple-event relocation method is applied to produce a catalog of central Oklahoma earthquakes from late 2009 into early 2015. Regional moment tensor (RMT) source parameters were determined for the largest and best-recorded earthquakes. Combining RMT results with relocated seismicity enabled determination of the length, depth, and style of faulting occurring on reactivated subsurface fault systems. It was found that the majority of earthquakes occur on near-vertical, optimally oriented (northeast-southwest and northwest-southeast) strike-slip faults in the shallow crystalline basement. In 2014, 17 earthquakes occurred with magnitudes of 4 or larger. It is suggested that these recently reactivated fault systems pose the greatest potential hazard to the region.

Oklahoma↗
USGS2015

Dam-breach analysis and flood-inundation mapping for selected dams in Oklahoma City, Oklahoma, and near Atoka, Oklahoma

Dams provide beneficial functions such as flood control, recreation, and storage of water supplies, but they also entail risk; dam breaches and resultant floods can cause substantial property damage and loss of life. The State of Oklahoma requires each owner of a high-hazard dam, which the Federal Emergency Management Agency defines as dams for which failure or improper operation probably will cause loss of human life, to develop an emergency action plan specific to that dam. Components of an emergency action plan are to simulate a flood resulting from a possible dam breach and map the resulting downstream flood-inundation areas. The resulting flood-inundation maps can provide valuable information to city officials, emergency managers, and local residents for planning an emergency response if a dam breach occurs. This report presents results of a cooperative study by the U.S. Geological Survey and the City of Oklahoma City to model dam-breach scenarios at 11 dams controlled and operated by Oklahoma City, Okla., and to map the potential flood-inundation areas of such dam breaches. To assist the City of Oklahoma City with completion of the emergency action plans for the 11 dams, the U.S. Geological Survey used light detection and ranging (lidar) elevation data (2004), which produced a 2-foot contour elevation map for the flood plains around Oklahoma City. A 5-meter Digital Terrain Map was used to model the flood plain below Atoka Reservoir in southeastern Oklahoma. Digital-elevation models, field survey measurements, hydraulic data, and hydrologic data (U.S. Geological Survey streamflow-gaging stations North Canadian River below Lake Overholser near Oklahoma City, Okla. [07241000], and North Canadian River at Britton Road at Oklahoma City, Okla. [07241520]), were used as inputs for the one-dimensional dynamic (unsteady-flow) models using Hydrologic Engineering Centers River Analysis System (HEC&ndash;RAS) software. The modeled flood elevations were exported to a geographic information system to produce flood-inundation maps. Water-surface profiles were developed for a 75-percent probable maximum flood dam-breach scenario and a sunny-day dam-breach scenario, as well as for maximum flood-inundation elevations and flood-wave arrival times at selected bridge crossings. Points of interest such as community-services offices, recreational areas, water-treatment plants, and wastewater-treatment plants were identified on the flood-inundation maps.

Oklahoma↗
USGS2014

Effect of bait and gear type on channel catfish catch and turtle bycatch in a reservoir

Hoop nets have become the preferred gear choice to sample channel catfish Ictalurus punctatus but the degree of bycatch can be high, especially due to the incidental capture of aquatic turtles. While exclusion and escapement devices have been developed and evaluated, few have examined bait choice as a method to reduce turtle bycatch. The use of Zote&trade; soap has shown considerable promise to reduce bycatch of aquatic turtles when used with trotlines but its effectiveness in hoop nets has not been evaluated. We sought to determine the effectiveness of hoop nets baited with cheese bait or Zote&trade; soap and trotlines baited with shad or Zote&trade; soap as a way to sample channel catfish and prevent capture of aquatic turtles. We used a repeated-measures experimental design and treatment combinations were randomly assigned using a Latin-square arrangement. Eight sampling locations were systematically selected and then sampled with either hoop nets or trotlines using Zote&trade; soap (both gears), waste cheese (hoop nets), or cut shad (trotlines). Catch rates did not statistically differ among the gear&ndash;bait-type combinations. Size bias was evident with trotlines consistently capturing larger sized channel catfish compared to hoop nets. Results from a Monte Carlo bootstrapping procedure estimated the number of samples needed to reach predetermined levels of sampling precision to be lowest for trotlines baited with soap. Moreover, trotlines baited with soap caught no aquatic turtles, while hoop nets captured many turtles and had high mortality rates. We suggest that Zote&trade; soap used in combination with multiple hook sizes on trotlines may be a viable alternative to sample channel catfish and reduce bycatch of aquatic turtles.

Oklahoma↗
USGS2014

Evaluating the use of side-scan sonar for detecting freshwater mussel beds in turbid river environments

Side-scan sonar is a valuable tool for mapping habitat features in many aquatic systems suggesting it may also be useful for locating sedentary biota. The objective of this study was to determine if side-scan sonar could be used to identify freshwater mussel (unionid) beds and the required environmental conditions. We used side-scan sonar to develop a series of mussel-bed reference images by placing mussel shells within homogenous areas of fine and coarse substrates. We then used side-scan sonar to map a 32-km river reach during spring and summer. Using our mussel-bed reference images, several river locations were identified where mussel beds appeared to exist in the scanned images and we chose a subset of sites ( n = 17) for field validation. The validation confirmed that ~60% of the sites had mussel beds and ~80% had some mussels or shells present. Water depth was significantly related to our ability to predict mussel-bed locations: predictive ability was greatest at depths of 1&ndash;2 m, but decreased in water >2-m deep. We determined side-scan sonar is an effective tool for preliminary assessments of mussel presence during times when they are located at or above the substrate surface and in relatively fine substrates excluding fine silt.

Oklahoma↗