Geology topics

Research about Kitsap Peninsula

Source-linked reports with geographic coverage including Kitsap Peninsula.

3 recordsLinked to original sources

USGS2016

Numerical simulation of the groundwater-flow system of the Kitsap Peninsula, west-central Washington

A groundwater-flow model was developed to improve understanding of water resources on the Kitsap Peninsula. The Kitsap Peninsula is in the Puget Sound lowland of west-central Washington, is bounded by Puget Sound on the east and by Hood Canal on the west, and covers an area of about 575 square miles. The peninsula encompasses all of Kitsap County, Mason County north of Hood Canal, and part of Pierce County west of Puget Sound. The peninsula is surrounded by saltwater, and the hydrologic setting is similar to that of an island. The study area is underlain by a thick sequence of unconsolidated glacial and interglacial deposits that overlie sedimentary and volcanic bedrock units that crop out in the central part of the study area. Twelve hydrogeologic units consisting of aquifers, confining units, and an underlying bedrock unit form the basis of the groundwater-flow model. Groundwater flow on the Kitsap Peninsula was simulated using the groundwater-flow model, MODFLOW‑NWT. The finite difference model grid comprises 536 rows, 362 columns, and 14 layers. Each model cell has a horizontal dimension of 500 by 500 feet, and the model contains a total of 1,227,772 active cells. Groundwater flow was simulated for transient conditions. Transient conditions were simulated for January 1985–December 2012 using annual stress periods for 1985–2004 and monthly stress periods for 2005–2012. During model calibration, variables were adjusted within probable ranges to minimize differences between measured and simulated groundwater levels and stream baseflows. As calibrated to transient conditions, the model has a standard deviation for heads and flows of 47.04 feet and 2.46 cubic feet per second, respectively. Simulated inflow to the model area for the 2005–2012 period from precipitation and secondary recharge was 585,323 acre-feet per year (acre-ft/yr) (93 percent of total simulated inflow ignoring changes in storage), and simulated inflow from stream and lake leakage was 43,905 acre-ft/yr (7 percent of total simulated inflow). Simulated outflow from the model primarily was through discharge to streams, lakes, springs, seeps, and Puget Sound (594,595 acre-ft/yr; 95 percent of total simulated outflow excluding changes in storage) and through withdrawals from wells (30,761 acre-ft/yr; 5 percent of total simulated outflow excluding changes in storage). Six scenarios were formulated with input from project stakeholders and were simulated using the calibrated model to provide representative examples of how the model could be used to evaluate the effects on water levels and stream baseflows of potential changes in groundwater withdrawals, in consumptive use, and in recharge. These included simulations of a steady-state system, no-pumping and return flows, 15-percent increase in current withdrawals in all wells, 80-percent decrease in outdoor water to simulate effects of conservation efforts, 15-percent decrease in recharge from precipitation to simulate a drought, and particle tracking to determine flow paths. Changes in water-level altitudes and baseflow amounts vary depending on the stress applied to the system in these various scenarios. Reducing recharge by 15 percent between 2005 and 2012 had the largest effect, with water-level altitudes declining throughout the model domain and baseflow amounts decreasing by as much as 18 percent compared to baseline conditions. Changes in pumping volumes had a smaller effect on the model. Removing all pumping and resulting return flows caused increased water-level altitudes in many areas and increased baseflow amounts of between 1 and 3 percent.

Washington↗

USGS2014

Hydrogeologic framework, groundwater movement, and water budget of the Kitsap Peninsula, west-central Washington

This report presents information used to characterize the groundwater-flow system on the Kitsap Peninsula, and includes descriptions of the geology and hydrogeologic framework, groundwater recharge and discharge, groundwater levels and flow directions, seasonal groundwater-level fluctuations, interactions between aquifers and the surface‑water system, and a water budget. The Kitsap Peninsula is in the Puget Sound lowland of west-central Washington, is bounded by Puget Sound on the east and by Hood Canal on the west, and covers an area of about 575 square miles. The peninsula encompasses all of Kitsap County, the part of Mason County north of Hood Canal, and part of Pierce County west of Puget Sound. The peninsula is surrounded by saltwater and the hydrologic setting is similar to that of an island. The study area is underlain by a thick sequence of unconsolidated glacial and interglacial deposits that overlie sedimentary and volcanic bedrock units that crop out in the central part of the study area. Geologic units were grouped into 12 hydrogeologic units consisting of aquifers, confining units, and an underlying bedrock unit. A surficial hydrogeologic unit map was developed and used with well information from 2,116 drillers’ logs to construct 6 hydrogeologic sections and unit extent and thickness maps. Unconsolidated aquifers typically consist of moderately to well-sorted alluvial and glacial outwash deposits of sand, gravel, and cobbles, with minor lenses of silt and clay. These units often are discontinuous or isolated bodies and are of highly variable thickness. Unconfined conditions occur in areas where aquifer units are at land surface; however, much of the study area is mantled by glacial till, and confined aquifer conditions are common. Groundwater in the unconsolidated aquifers generally flows radially off the peninsula in the direction of Puget Sound and Hood Canal. These generalized flow patterns likely are complicated by the presence of low-permeability confining units that separate discontinuous bodies of aquifer material and act as local groundwater-flow barriers. Groundwater-level fluctuations observed during the monitoring period (2011–12) in wells completed in unconsolidated hydrogeologic units indicated seasonal variations ranging from 1 to about 20 feet. The largest fluctuation of 33 feet occurred in a well that was completed in the bedrock unit. Streamgage discharge measurements made during 2012 indicate that groundwater discharge to creeks in the area ranged from about 0.41 to 33.3 cubic feet per second. During 2012, which was an above-average year of precipitation, the groundwater system received an average of about 664,610 acre-feet of recharge from precipitation and 22,122 acre-feet of recharge from return flows. Most of this annual recharge (66 percent) discharged to streams, and only about 4 percent was withdrawn from wells. The remaining groundwater recharge (30 percent) left the groundwater system as discharge to Hood Canal and Puget Sound.

Washington↗

USGS1980

Ground-water availability on the Kitsap Peninsula, Washington

Unconsolidated deposits on the Kitsap peninsula are of glacial and interglacial origin. These deposits were divided into three units on the basis of their lithology and hydraulic properties. Two of the three units are composed of layers of sand and gravel alternating with layers of silt and clay. The third unit consists of silt and clay and in most places separates the other two units. The thickness of the upper unit ranges from 200 to 600 feet and the middle unit from 10 to 260 feet. The thickness of the lower unit is believed to range from 2,000 to 3,000 feet. The water-bearing strata in the upper unit are fairly continuous and average 15 feet in thickness. The lower water-bearing strata probably are not as continuous as those in the upper unit, but they yield larger quantities of water to wells. The silt-and-clay unit averages 70 feet in thickness, occurs generally near sea level, and is not known to contain any major water-bearing deposits. The average annual ground-water recharge to streams on the Kitsap peninsula was estimated to be 17 times the 1975 annual ground-water pumpage for the peninsula. Some, hut an unknown amount, of this water is available for increased withdrawal by wells. Increased withdrawals cause decreased streamflow, declining water levels, and increased seawater contamination. There appears to be no widespread seawater contamination of wells in the study area. Local areas where chloride concentrations in well water exceed 25 milligrams per liter are the southern part of the Longbranch peninsula, Horsehead Bay, Point Evans, Sinclair Inlet, Eagle Harbor, Fletcher Bay, the north end of Bainbridge Island, and the north tip of the Kitsap peninsula.

Washington↗