Search USGSSearch

Geology topics

Research about Idaho;Oregon

Source-linked reports with geographic coverage including Idaho;Oregon.

11 recordsLinked to original sources

Archive of digital chirp subbottom profile data collected during USGS Cruise 13GFP01, Brownlee Dam and Hells Canyon Reservoir, Idaho and Oregon, 2013

From March 16 - 31, 2013, the U.S. Geological Survey in cooperation with the Idaho Power Company conducted a geophysical survey to investigate sediment deposits and long-term sediment transport within the Snake River from Brownlee Dam to Hells Canyon Reservoir, along the Idaho and Oregon border; this effort will help the USGS to better understand geologic processes. This report serves as an archive of unprocessed digital chirp subbottom data, trackline maps, navigation files, Geographic Information System (GIS) files, Field Activity Collection System (FACS) logs, and formal Federal Geographic Data Committee (FGDC) metadata. Gained (showing a relative increase in signal amplitude) digital images of the seismic profiles are also provided. Refer to the Acronyms page for expansions of acronyms and abbreviations used in this report.

Idaho;Oregon

Seismic profile analysis of sediment deposits in Brownlee and Hells Canyon Reservoirs near Cambridge, Idaho

The U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center, in cooperation with the USGS Idaho Water Science Center and the Idaho Power Company, collected high-resolution seismic reflection data in the Brownlee and Hells Canyon Reservoirs, in March of 2013.These reservoirs are located along the Snake River, and were constructed in 1958 (Brownlee) and 1967 (Hells Canyon). The purpose of the survey was to gain a better understanding of sediment accumulation within the reservoirs since their construction. The chirp system used in the survey was an EdgeTech Geo-Star Full Spectrum Sub-Bottom (FSSB) system coupled with an SB-424 towfish with a frequency range of 4 to 24 kHz. Approximately 325 kilometers of chirp data were collected, with water depths ranging from 0-90 meters. These reservoirs are characterized by very steep rock valley walls, very low flow rates, and minimal sediment input into the system. Sediments deposited in the reservoirs are characterized as highly fluid clays. Since the acoustic signal was not able to penetrate the rock substrate, only the thin veneer of these recent deposits were imaged. Results from the seismic survey indicate that throughout both of the Brownlee and Hells Canyon reservoirs the accumulation of sediments ranged from 0 to 2.5 m, with an average of 0.5 m. Areas of above average sediment accumulation may be related to lower slope, longer flooding history, and proximity to fluvial sources.

Idaho;Oregon

Mercury concentrations in water, and mercury and selenium concentrations in fish from Brownlee Reservoir and selected sites in Boise and Snake Rivers, Idaho and Oregon, 2013

Mercury (Hg) analyses were conducted on samples of sport fish and water collected from six sampling sites in the Boise and Snake Rivers, and Brownlee Reservoir to meet National Pollution Discharge and Elimination System (NPDES) permit requirements for the City of Boise, Idaho. A water sample was collected from each site during October and November 2013 by the City of Boise personnel and was analyzed by the Boise City Public Works Water Quality Laboratory. Total Hg concentrations in unfiltered water samples ranged from 0.73 to 1.21 nanograms per liter (ng/L) at five river sites; total Hg concentration was highest (8.78 ng/L) in a water sample from Brownlee Reservoir. All Hg concentrations in water samples were less than the EPA Hg chronic aquatic life criterion in Idaho (12 ng/L). The EPA recommended a water-quality criterion of 0.30 milligrams per kilogram (mg/kg) methylmercury (MeHg) expressed as a fish-tissue residue value (wet-weight MeHg in fish tissue). MeHg residue in fish tissue is considered to be equivalent to total Hg in fish muscle tissue and is referred to as Hg in this report. The Idaho Department of Environmental Quality adopted the EPA’s fish-tissue criterion and a reasonable potential to exceed (RPTE) threshold 20 percent lower than the criterion or greater than 0.24 mg/kg based on an average concentration of 10 fish from a receiving waterbody. NPDES permitted discharge to waters with fish having Hg concentrations exceeding 0.24 mg/kg are said to have a reasonable potential to exceed the water-quality criterion and thus are subject to additional permit obligations, such as requirements for increased monitoring and the development of a Hg minimization plan. The Idaho Fish Consumption Advisory Program (IFCAP) issues fish advisories to protect general and sensitive populations of fish consumers and has developed an action level of 0.22 mg/kg wet weight Hg in fish tissue. Fish consumption advisories are water body- and species-specific and are used to advise of allowable fish consumption from specific water bodies. The geometric mean Hg concentration of 10 fish of a single species collected from a single water body (lake or stream) in Idaho is compared to the action level to determine if a fish consumption advisory should be issued. The U.S. Geological Survey collected and analyzed individual fillets of mountain whitefish ( Prosopium williamsoni ), smallmouth bass ( Micropterus dolomieu ), and channel catfish ( Ictalurus punctatus ) for Hg. The median Hg concentration of 0.32 mg/kg exceeded the Idaho water-quality criterion at the site in Brownlee Reservoir. Average Hg concentrations from Brownlee Reservoir (0.32 mg/kg) and the Boise River at mouth (0.33 mg/kg) exceeded the Hg RPTE threshold (>0.24 mg/kg). IFCAP action levels also were exceeded at the sites on Brownlee Reservoir and at the mouth of the Boise River. Median Hg concentrations in fish at the remaining four river sites were less than 0.20 mg/kg with average concentrations ranging from 0.14 to 0.21 mg/kg Hg. Selenium (Se) analysis also was conducted on one composite fish tissue sample per site to screen for general concentrations and to provide information for future risk assessments. Concentrations of Se ranged from 0.07 to 0.49 mg/kg wet weight; average concentrations were highest in smallmouth bass (0.40 mg/kg) and lowest in mountain whitefish (0.12 mg/kg).

Idaho;Oregon

Monitoring plan for mercury in fish tissue and water from the Boise River, Snake River, and Brownlee Reservoir, Idaho and Oregon

The methylmercury criterion adopted as a water-quality standard in the State of Idaho is a concentration in fish tissue rather than a concentration in water. A plan for monitoring mercury in fish tissue and water was developed to evaluate whether fish in the Boise River, Idaho, upstream and downstream of wastewater-treatment plant discharges, meet the methylmercury water-quality criterion. Monitoring also will be conducted at sites on the Snake River, upstream and downstream of the confluence with the Boise River, and in Brownlee Reservoir, which lies along the border between Idaho and Oregon. Descriptions of standard procedures for collecting and processing samples and quality assurance steps are included. This monitoring plan is intended to provide a framework for cooperative methylmercury sampling in the lower Boise River basin.

Idaho;Oregon

Performance of quantitative vegetation sampling methods across gradients of cover in Great Basin plant communities

Resource managers and scientists need efficient, reliable methods for quantifying vegetation to conduct basic research, evaluate land management actions, and monitor trends in habitat conditions. We examined three methods for quantifying vegetation in 1-ha plots among different plant communities in the northern Great Basin: photography-based grid-point intercept (GPI), line-point intercept (LPI), and point-quarter (PQ). We also evaluated each method for within-plot subsampling adequacy and effort requirements relative to information gain. We found that, for most functional groups, percent cover measurements collected with the use of LPI, GPI, and PQ methods were strongly correlated. These correlations were even stronger when we used data from the upper canopy only (i.e., top “hit” of pin flags) in LPI to estimate cover. PQ was best at quantifying cover of sparse plants such as shrubs in early successional habitats. As cover of a given functional group decreased within plots, the variance of the cover estimate increased substantially, which required more subsamples per plot (i.e., transect lines, quadrats) to achieve reliable precision. For GPI, we found that that six–nine quadrats per hectare were sufficient to characterize the vegetation in most of the plant communities sampled. All three methods reasonably characterized the vegetation in our plots, and each has advantages depending on characteristics of the vegetation, such as cover or heterogeneity, study goals, precision of measurements required, and efficiency needed.

Idaho;Oregon

Snake River Basin Ecoregion: Chapter 24 in Status and trends of land change in the Western United States--1973 to 2000

Located in south-central Idaho, the Snake River Basin Ecoregion spans 66,063 km 2 (25,507 mi 2 ) of mostly sagebrushsteppe ( Artemisia tridentata ) with some areas of saltbushgreasewood ( Atriplex spp. and Sarcobatus spp.) and barren lava fields (fig. 1) (Omernik, 1987; U.S. Environmental Protection Agency, 1997). The Snake River is the dominant hydrographic feature extending the full length (east to west) of the ecoregion. Elevation ranges from approximately 640 m in the “Treasure Valley” (Canyon County, near Nampa, Idaho) to 2,000 m in the semiarid foothills and eastern Snake River Plain. Mean annual precipitation ranges from 15 to 50 cm annually, and highest precipitation occurs in the high elevations of the dissected plateaus and Teton Basin along the eastern edge of the ecoregion. Mean January temperatures range from –14 to 4°C, with mean July temperatures ranging from 8 to 32°C.

Idaho;Oregon

Summary of the Snake River plain Regional Aquifer-System Analysis in Idaho and eastern Oregon

Regional aquifers underlying the 15,600-square-mile Snake River Plain in southern Idaho and eastern Oregon was studied as part of the U.S. Geological Survey's Regional Aquifer-System Analysis program. The largest and most productive aquifers in the Snake River Plain are composed of Quaternary basalt of the Snake River Group, which underlies most of the 10,8000-square-mile eastern plain. Aquifer tests and simulation indicate that transmissivity of the upper 200 feet of the basalt aquifer in the eastern plain commonly ranges from about 100,000 to 1,000,000 feet squared per day. However, transmissivity of the total aquifer thickness may be as much as 10 million feet squared per day. Specific yield of the upper 200 feet of the aquifer ranges from about 0.01 to 0.20. Average horizontal hydraulic conductivity of the upper 200 feet of the basalt aquifer ranges from less than 100 to 9,000 feet per day. Values may be one to several orders of magnitude higher in parts in individual flows, such as flow tops. Vertical hydraulic conductivity is probably several orders of magnitude lower than horizontal hydraulic conductivity and is generally related to the number of joints. Pillow lava in ancestral Snake River channels has the highest hydraulic conductivity of all rock types. Hydraulic conductivity of the basalt decreases with depth because of secondary filling of voids with calcite and silica. An estimated 80 to 120 million acre-feet of water is believed to be stored in the upper 200 feet of the basalt aquifer in the eastern plain. The most productive aquifers in the 4,800-square-mile western plain are alluvial sand and gravel in the Boise River valley. Although aquifer tests indicate that transmissivity of alluvium in the Boise River valley ranges from 5,000 to 160,000 feet squared per day, simulation suggests that average transmissivity of the upper 500 feet is generally less than 20,000 feet squared per day. Vertically averaged horizontal hydraulic conductivity of the upper 500 feet of alluvium ranges from about 4 to 40 feet per day; higher values can be expected in individual sand and gravel zones. Vertical hydraulic conductivity is considerably lower because of the presence of clay layers. Hydraulic heads measured in piezometers, interpreted from diagrams showing ground-water flow and equipotential lines and estimated by computer simulation, demonstrate that water movement is three dimensional through the rock framework. Natural recharge takes place along the margins of the plain where head decreases with depth; discharge takes place near some reaches of the Snake River and the Boise River where head increases with depth. Geothermal water in rhyolitic rocks in the western plain and western part of the eastern plain has higher hydraulic head than the overlying cold water. Geothermal water, therefore, moves upward and merges into the cold-water system. Basin water-budget analyses indicate that the volume of cold water. Carbon-14 age determinations, which indicate that residence time of geothermal water is 17,700 to 20,300 years, plus or minus 4,000 years, imply slow movement of water through the geothermal system. Along much of its length, the Snake River gains large quantities of ground water. On the eastern plain, the river gained about 1.9 million acre-feet of water between Blackfoot and Neeley, Idaho, in 1980. Between Milner and King Hill, Idaho, the river gained 4.7 million acre-feet, mostly as spring flow from the north side. Upstream from Blackfoot and in the vicinity of Lake Walcott, the rover loses flow to ground water during parts or all of the year. On the western plain, river gains from ground water are small relative to those on the eastern plain; most are from seepage. Streams in tributary drainage basins supply calcium/bicarbonate type and calcium/magnesium/bicarbonate type water to the plain. Water type is a reflection of the chemical composition of rocks in the drainage basin, Concentrations of dissolved solids are smallest, about 50 milligrams per liter, in streams such as the Boise River that drain areas of granitic rocks; concentrations are greatest, about 400 milligrams per liter, in streams such as the Owyhee and Raft Rivers that drain area of sedimentary rocks. Water chemistry reflects the interaction of surface water and ground water. The chemical composition of ground water in the plain is essentially the same as that in streamflow and groundwater discharge from tributary drainage basins. Tributary drainage basins supplied 85 percent of the ground-water recharge in the eastern plain during 1980 and a nearly equivalent percentage of the solute load in ground water; human activities and dissolution of minerals supplied the other solutes. Dissolved-solids concentrations in ground water were generally less than 400 milligrams per liter. Water from the lower geothermal system is chemically different from water from the upper cold-water system. Geothermal water typically has greater concentrations of sodium, bicarbonate, sulfate, chloride, fluoride, silica, arsenic, boron, and lithium and smaller concentrations of calcium, magnesium, and hydrogen. Difference are attributed to ion exchange as geothermal moves through the rock framework. Irrigation, mostly on the Snake River Plain, accounted for about 96 percent of consumptive water use in Idaho during 1980. The use of surface water for irrigation for more than 100 years has caused major changes in the hydrologic system on the plain. Construction of dams, reservoirs, and diversifications effected planned changes in the surface-water system but resulted in largely unplanned changes in the ground-water system. During those years of irrigation, annual recharge in the main part of the eastern plain increased to about 6.7 million acre-feet in 1980, or by about 70 percent. Most of the increase was from percolation of surface water diverted for irrigation. From preirrigation to 1952, groundwater storage increased about 24 million acre-feet, and storage decreased from 1952 to 1964 and from 1976 to 1980 because of below-normal precipitation and increased withdrawals of ground water for irrigation. Annual ground-water discharge increased to about 7.1 million acre-feet in 1980, or about 80 percent since the start of irrigation. About 10 percent of the 1980 total discharge was ground-water pumpage. About 3.1 million acres, or almost one-third of the plain, was irrigated during 1980: 2.0 million acres with surface water, 1.0 million acres with ground water, and 0.1 million acres with combined surface and ground water. About 8.9 million acre-feet of Snake River water was diverted for irrigation during 1980 and 2.3 million acre-feet of ground water was pumped from 5,300 wells. Most irrigation wells on the eastern plain are open to basalt. About two-thirds of them yield more than 1,500 gallons per minute with a reported maximum of 7,240 gallons per minute; drawdown is less than 20 feet in two-thirds of the wells. Most irrigation wells on the western plain are open to sedimentary rocks. About one-third of them yield more than 1,00 gallons per minute with a reported maximum of 3,850 gallons per minute; drawndown is less than 20 feet in about one-fifth of the wells. The major instream use of water on the Snake River Plain is hydroelectric power generation. Fifty-two million acre-feet of water generated 2.6 million megawatthours of electricity during 1980. Digital computer ground-water flows models of the eastern and western plain reasonably simulated regional changes in water levels and ground-water discharges from 1880 (preirrigation) to 1980. Model results support the concept of three-dimensional flow and the hypotheses of no underflow between the eastern and western plain. Simulation of the regional aquifer system in the eastern plain indicates that is 1980 hydrologic conditions, including pumpage, were to remain the same for another 30 years, moderate declines in ground-water levels and decreases in spring discharges would continue. Increased ground-water pumpage to irrigate an additional 1 million acres could cause ground-water levels to decline a few tens of feet in the central part of the plain and could cause corresponding decreases in ground-water discharge. A combination of actions such as increased ground-water pumpage and decreased use of surface water for irrigation (resulting in reduced recharge) would accentuate the changes.

Idaho;Oregon

Irrigated acreage and other land uses on the Snake River Plain, Idaho and eastern Oregon

Prompted by the need for a current, accurate, and repeatable delineation of irrigated acreage on the Snake River Plain, the U.S. Geological Survey entered into a cooperative agreement with the Idaho Department of Water Resources Image Analysis Facility and the U.S. Bureau of Reclamation to delineate 1980 land use form Landsat data. Irrigated acreage data were needed as input to groundwater flow models developed by the U.S. Geological Survey in a study of the regional aquifer system underlying the Snake River Plain. Single-date digital multispectral scanner data analyzed to delineate land-use classes. Source of irrigation water (surface water, ground water, and combined) was determined from county maps of 1975 water-related land use, data from previous investigations, and field checking. Surface-water diversions for irrigation on the Snake River Plain began in the 1840's. With the stimulus of Federal aid authorized by the Desert Land Act, Carey Act, and Reclamation Act, irrigated area increased rapidly in the early 1900's. By 1929, 2.2 million acres were irrigated. Ground water became and important source of irrigation water after World War II. In 1980, about 3.1 million acres of the Snake River Plain were irrigate: 2.0 million acres with surface water, 1.0 million with ground water, and 0.1 million with combined surface and ground water. About 5.2 million acres (half of the plain) are undeveloped rangeland, 1.0 million acres (one-tenth) are classified as barren. The remaining land is a mixture of dryland agriculture, water bodies, wetland, forests, and urban areas.

Idaho;Oregon

Power resources of Snake River between Huntington, Oregon and Lewiston, Idaho: Chapter C in Contributions to the hydrology of the United States, 1923-1924

Thousands of people are familiar with that part of Snake River where it flows for more than 300 miles in a general westward course across the plains of southern Idaho, but few have traversed the river where it flows northward and for 200 miles forms the boundary between Idaho and Oregon and for 30 miles the boundary between Idaho and Washington. Below the mining town of Homestead, Oreg., which is the end of a branch line of the Oregon Short Line Railroad, Snake River finds its way through the mountain ranges that seem to block its way to Columbia River in a canyon which, though not so well known, so majestic, nor so kaleidoscopic in color, is in some respects worthy of comparison with the Grand Canyon of the Colorado, for at some places it is deeper and narrower than the Grand Canyon at El Tovar. The Snake, unlike the Colorado, can be reached at many points through the valleys of tributary streams, and the early prospectors no doubt thoroughly explored all parts of the canyon. To traverse the river between Homestead, Oreg., and Lewiston, Idaho, is, however, a difficult undertaking and there are only a few records of boat journeys through the entire stretch. It has long been known that this portion of Snake River contains large potential water powers, but until recently no detailed surveys or examinations covering the entire stretch of the river had been made to determine their location or extent. A railroad has been proposed between Homestead and Lewiston which would provide a direct connection between the railroad systems of northern and southern Idaho. One function of the Geological Survey is to determine the possible interface between transportation routes on land and potential water-power development, and the information set forth in this paper has a bearing on that problem.

Idaho;Oregon