Search USGS⌕ Search

Geology topics

Research about Grafton County, New Hampshire

Source-linked reports with geographic coverage including Grafton County, New Hampshire.

14 recordsLinked to original sources
USGS2024

Bedrock geologic map of the Woodstock quadrangle, Grafton County, New Hampshire

The bedrock geology of the Woodstock 7.5-minute quadrangle consists of highly deformed metasedimentary rocks of the Central Maine trough, including the Silurian Rangeley and Perry Mountain Formations and the Devonian Littleton Formation. The central, northern, and eastern parts of the quadrangle are underlain by the oldest rocks in the area, the Rangeley Formation. In the southwest and south-central part of the quadrangle, metaturbidites of the Perry Mountain Formation and subsequent Littleton Formation overly the Rangeley Formation in a deformed F 1 synform, herein informally called the Bagley Brook basin. The metasedimentary rocks were intruded by widespread syn- to post-tectonic granitoids of the Devonian New Hampshire Plutonic Suite and minor post-metamorphic Jurassic-Cretaceous mafic dikes of the White Mountain Plutonic-Volcanic Suite. The metasedimentary rocks were affected by at least two episodes of deformation in the Devonian Acadian orogeny. The dominant regional foliation is second-generation (S 2 /D 2 ) and formed during the development of sillimanite-muscovite mineral assemblages. Large bodies of the Early Devonian Kinsman Granodiorite intruded the metasedimentary rocks semi-concordantly during D 2 deformation. Dikes of the Late Devonian Concord Granite cut the Kinsman Granodiorite and the metasedimentary rocks and were emplaced either syn- or post-D 2 . The map pattern in the Rangeley Formation is dominated by northeast to northwest trending, moderately to steeply north-dipping F 2 and F 3 folds. Map-scale F 1 folds are defined by the Bagley Brook basin. Previous division of Rangeley Formation stratigraphy in this region into “upper” and “lower” parts was not corroborated by 1:24,000-scale mapping of lithodemic units, and rocks previously mapped as part of the Smalls Falls and Madrid Formations are here reassigned to the Rangeley Formation. Some rocks previously mapped as the lower part of the Littleton Formation are now assigned to the Perry Mountain Formation. The Littleton Formation on this map is approximately equivalent to rocks previously mapped as the upper part of the same formation. Steeply dipping fractures in the quadrangle show a preferred northeast orientation, consistent with subsurface fracture orientations in the well fields near Mirror Lake. Jurassic-Cretaceous mafic dikes and normal faults show preferred northeast orientations, similar to the fractures, suggesting that the extensional stress field that controlled dike orientation during the Mesozoic also produced the dominant brittle fabrics in the area.

New Hampshire↗
USGS2018

Bedrock geologic map of the Lisbon quadrangle, and parts of the Sugar Hill and East Haverhill quadrangles, Grafton County, New Hampshire

The bedrock geologic map of the Lisbon quadrangle, and parts of the Sugar Hill and East Haverhill quadrangles, Grafton County, New Hampshire, covers an area of approximately 73 square miles (189 square kilometers) in west-central New Hampshire. This map was created as part of a larger effort to produce a new bedrock geologic map of Vermont through the collection of field data at a scale of 1:24,000. A large part of the map area consists of the Bronson Hill anticlinorium, a post-Early Devonian structure that is cored by metamorphosed Cambrian to Devonian sedimentary, volcanic, and plutonic rocks. The Bronson Hill anticlinorium is the apex of the Middle Ordovician to earliest-Silurian Bronson Hill magmatic arc that contains the Ammonoosuc Volcanics, Partridge Formation, and Oliverian Plutonic Suite, and extends from Maine, through western New Hampshire (down the eastern side of the Connecticut River), through southern New England to Long Island Sound. The deformed and partially eroded arc is locally overlain by a relatively thin Silurian section of metasedimentary rocks (Clough Quartzite and Fitch Formation) that thickens to the east. The Silurian section near Littleton is disconformably overlain by a thicker, Lower Devonian section that includes mostly metasedimentary and minor metavolcanic rocks of the Littleton Formation. The Bronson Hill anticlinorium is bisected by a series of northeast-southwest trending Mesozoic normal faults. Primarily among them is the steeply northwest-dipping Ammonoosuc fault that divides older and younger units (lower and upper sections) of the Ammonoosuc Volcanics. The Ammonoosuc Volcanics are lithologically complex and predominantly include interlayered and interfingered rhyolitic to basaltic volcanic and volcaniclastic rocks, as well as lesser amounts of slate, phyllite, ironstone, chert, sandstone, and pelite. The Albee Formation underlies the Ammonoosuc Volcanics and is predominantly composed of interbedded metamorphosed sandstone, siltstone, and phyllite. During the Late Ordovician, a series of arc-related plutons intruded the Ammonoosuc Volcanics including the Moody Ledge pluton and the Scrag granite of Billings (1937). Subsequent plutonism related to the Acadian orogeny occurred after volcanism and deposition resulted in the Littleton Formation during the Late Devonian, including the intrusion of the Haverhill pluton and French Pond Granite found in the southern part of the map. This report consists of a geologic map and an online geographic information systems database that includes contacts of bedrock geologic units, faults, outcrops, and structural geologic information. The geologic map is intended to serve as a foundation for applying geologic information to problems involving land use decisions, groundwater availability and quality, earth resources such as natural aggregate for construction, assessment of natural hazards, and engineering and environmental studies for waste disposal sites and construction projects.

New Hampshire↗
USGS2007

The Piermont allochthon revisited and redefined at its type locality: Discussion

Timms (2004) has presented a very restricted interpretation of an important structural feature in the New England Appalachians that I originally termed the Piermont allochthon and interpreted as a far-traveled Acadian thrust sheet (Moench et al., 1987; Moench, 1990). As described herein, subsequent mapping has led me to a very different conclusion that, whether right or wrong, is crucial to understand because it bears directly on how we interpret northern Appalachian tectonics for Late Ordovician to Early Devonian time (see also Billings [1992] and Moench [1992]). Figures 1 and 2 of this paper and 2 and 3 of Timms (2004), at the same scale, are vastly different depictions of stratigraphy and structure at the very southern tip of the Piermont “allochthon” (quotes mine), which I now term the Piermont-Frontenac parautochthon. Timms appears to have been unaware of my concurrent work in the area and the evolution of my understanding of the Piermont-Frontenac parautochthon since the 1990s, which is discussed below.

New Hampshire↗
USGS2004

Time-series monitoring in fractured-rock aquifers

Time-lapse monitoring of subsurface processes is an emerging and promising area of hydrogeophysics. The combined use of non-invasive or minimally invasive geophysical methods with hydraulic and geochemical sampling is a cost-effective approach for aquifer characterization, long-term aquifer monitoring, and remediation monitoring. Time-lapse geophysical surveys can indirectly measure time-varying hydrologic parameters such as fluid saturation or solute concentration. Monitoring of time-varying hydrologic processes provides insight into aquifer properties and structure and aquifer responses to natural or induced stresses, such as seasonal fluctuations or fluid injection experiments for active remediation. The U.S. Geological Survey (USGS) Office of Ground Water, Branch of Geophysics, in cooperation with USGS Toxic Substances Hydrology Program, Environmental Protection Agency (USEPA), Department of Defense, the University of Connecticut, and Stanford University researchers, has applied time-lapse geophysics for site characterization and remediation monitoring in a number of studies. Recent and ongoing examples of time-lapse monitoring in fractured-rock aquifers include: 1) application of attenuation-difference, boreholeradar tomography used to monitor a series of sodium chloride tracer injection tests in fractured crystalline rock; 2) application of attenuation- and velocity-difference tomography and radar-reflection data to monitor steam injection in a fractured limestone aquifer; 3) design of an electrical resistivity tomography investigation to monitor the injection of resistive water into brackish water in a fractured limestone aquifer for aquifer storage and recovery (ASR); and 4) combined application of borehole-geophysical logging with long-term discreteinterval monitoring of hydraulic head and water-chemistry in a fractured crystalline-rock aquifer. These investigations demonstrate the application of geophysical methods to provide quantitative information about the subsurface critical for characterizing aquifer structure, flow dynamics, and hydraulic processes.

New Hampshire↗
USGS2003

Time‐lapse imaging of saline‐tracer transport in fractured rock using difference‐attenuation radar tomography

Accurate characterization of fractured‐rock aquifer heterogeneity remains one of the most challenging and important problems in groundwater hydrology. We demonstrate a promising strategy to identify preferential flow paths in fractured rock using a combination of geophysical monitoring and conventional hydrogeologic tests. Cross‐well difference‐attenuation ground‐penetrating radar was used to monitor saline‐tracer migration in an experiment at the U.S. Geological Survey Fractured Rock Hydrology Research Site in Grafton County, New Hampshire. Radar data sets were collected every 10 min in three adjoining planes for 5 hours during each of 12 tracer tests. An innovative inversion method accounts for data acquisition times and temporal changes in attenuation during data collection. The inverse algorithm minimizes a combination of two functions. The first is the sum of weighted squared data residuals. Second is a measure of solution complexity based on an a priori space‐time covariance function, subject to constraints that limit radar‐attenuation changes to regions of the tomograms traversed by high difference‐attenuation ray paths. The time series of tomograms indicate relative tracer concentrations and tracer arrival times in the image planes; from these we infer the presence and location of a preferential flow path within a previously identified zone of transmissive fractures. These results provide new insights into solute channeling and the nature of aquifer heterogeneity at the site.

New Hampshire↗
USGS1998

Use of multi-offset borehole-radar reflection method in fractured crystalline bedrock at Mirror Lake, Grafton County, New Hampshire

Multi-offset, single-hole, borehole-radar reflection surveys were conducted at the U.S. Geological Survey Fractured Rock Research Site at Mirror Lake, in Grafton County, New Hampshire. The study was conducted to evaluate the benefits of applying multi-offset seismic processing techniques to borehole-radar reflection surveys in fractured rock. The multi-offset reflection surveys were conducted in conjunction with a saline tracer- injection experiment. During injection, a sodium chloride (NaCl) solution was continuously pumped into a hydraulically conductive zone that was isolated by specially constructed, reusable, PVC straddle packers suspended from PVC casing. Eight common-offset borehole reflection profiles were collected within the PVC-sleeved portion of the borehole before and during the tracer injection. The offset between the transmitter and receiver antennas ranged from 6.4 to 9.9 m (meters). The common offset data were filtered, sorted into common distance-point (CDP) gathers, normal move-out (NMO) corrected, and stacked to produce a zero-offset borehole CDP profile. Comparison of the common-offset and CDP profiles indicates that multi-offset data acquisition and CDP processing; (1) increases the resolution of reflectors near the borehole, (2) decreases the effects of direct wave coupling, antenna ringing, and system noise, and (3) improves the clarity of difference images used to identify the effects of saline tracer on reflections from transmissive fractures.

New Hampshire↗
USGS1998

Mapping hydraulically permeable fractures using directional borehole radar and hole-to-hole tomography with a saline tracer

Reflection-mode borehole radar and transmission-mode radar tomograms image heterogeneity in the electromagnetic properties of rock. Heterogeneity may be produced by interfaces between different rock types, foliation, and fracturing. In crystalline rock, hydraulic flow is primarily through fracture networks rather than through the rock matrix. Borehole radar methods have been applied to help map flow paths in crystalline rock. Correlation of features identified in borehole radar reflection records and tomograms with hydraulic flow paths is generally uncertain because the records show responses to heterogeneity of all- kinds, not just to hydraulically permeable fractures. Even in lithologically uniform rock, it is often not possible to distinguish fractures of high hydraulic permeabilities from those with low permeabilities. It is possible to “erase” signatures from lithologic interfaces and rock fabric to identify the signatures of hydraulically permeable fractures by using a saline tracer in fractured crystalline rock because the electrical properties of the rock, except for the fractures that are open to infiltration by the brine solution, remain the same after the injection of the brine and may be removed by examining differences. Saline tracer experiments were carried out in 1995, 1996, and 1997 in the FSE well field at the Mirror Lake fractured-rock hydrology research site in Grafton County, New Hampshire. Comparisons of results from directional radar reflection surveys to well-to-well difference attenuation tomography in the same pairs of wells show generally good correspondence between the location of radar reflections and attenuation anomalies. Our results demonstrate the advantage of using a saline tracer for before-and-after difference mapping of hydraulically permeable fractures in lithologically heterogeneous rock and the utility of the coordinated use of directional borehole radar and hole-to-hole radar tomography.

New Hampshire↗
USGS1997

Numerical simulation of ground-water flow through glacial deposits and crystalline bedrock in the Mirror Lake area, Grafton County, New Hampshire

This report documents the development of a computer model to simulate steady-state (long-term average) flow of ground water in the vicinity of Mirror Lake, which lies at the eastern end of the Hubbard Brook valley in central New Hampshire. The 10-km2 study area includes Mirror Lake, the three streams that flow into Mirror Lake, Leeman's Brook, Paradise Brook, and parts of Hubbard Brook and the Pemigewasset River. The topography of the area is characterized by steep hillsides and relatively flat valleys. Major hydrogeologic units include glacial deposits, composed of till containing pockets of sand and gravel, and fractured crystalline bedrock, composed of schist intruded by granite, pegmatite, and lamprophyre. Ground water occurs in both the glacial deposits and bedrock. Precipitation and snowmelt infiltrate to the water table on the hillsides, flow downslope through the saturated glacial deposits and fractured bedrock, and discharge to streams and to Mirror Lake. The model domain includes the glacial deposits, the uppermost 150m of bedrock, Mirror Lake, the layer of organic sediments on the lake bottom, and streams and rivers within the study area. A streamflow routing package was included in the model to simulate baseflow in streams and interaction between streams and ground water. Recharge from precipitation is assumed to be areally uniform, and riparian evapotranspiration along stream banks is assumed negligible. The spatial distribution of hydraulic conductivity is represented by dividing the model domain into several zones, each having uniform hydraulic properties. Local variations in recharge and hydraulic conductivities are ignored; therefore, the simulation results characterize the general ground-water system, not local details of ground-water movement. The model was calibrated using a nonlinear regression method to match hydraulic heads measured in piezometers and wells, and baseflow in three inlet streams to Mirror Lake. Model calibration indicates that recharge from precipitation to the water table is 26 to 28 cm/year. Hydraulic conductivities are 1.7 x 10-6 to 2.7 x 10-6 m/s for glacial deposits, about 3 x 10-7 m/s for bedrock beneath lower hillsides and valleys, and about 6x10-8 m/s for bedrock beneath upper hillsides and hilltops. Analysis of parameter uncertainty indicates that the above values are well constrained, at least within the context of regression analysis. In the regression, several attributes of the ground-water flow model are assumed perfectly known. The hydraulic conductivity for bedrock beneath upper hillsides and hilltops was determined from few data, and additional data are needed to further confirm this result. Model fit was not improved by introducing a 10-to-1 ration of horizontal-to-vertical anisotropy in the hydraulic conductivity of the glacial deposits, or by varying hydraulic conductivity with depth in the modeled part (uppermost 150m) of the bedrock. The calibrated model was used to delineate the Mirror Lake ground-water basin, defined as the volumes of subsurface through which ground water flows from the water table to Mirror Lake or its inlet streams. Results indicate that Mirror Lake and its inlet streams drain an area of ground-water recharge that is about 1.5 times the area of the surface-water basin. The ground-water basin extends far up the hillside on the northwestern part of the study area. Ground water from this area flows at depth under Norris Brook to discharge into Mirror Lake or its inlet streams. As a result, the Mirror Lake ground-water basin extends beneath the adjacent ground-water basin that drains into Norris Brook. Model simulation indicates that approximately 300,000 m3/year of precipitation recharges the Mirror Lake ground-water basin. About half the recharge enters the basin in areas where the simulated water table lies in glacial deposits; the other half enters the basin in areas where the simulated water table lies in be

New Hampshire↗
USGS1997

Cross‐hole radar attenuation tomography using a frequency centroid down‐shift method: Consideration of non‐linear frequency dependence of EM wave attenuation

This paper presents a cross-hole radar attenuation tomography method based on analysis of the down-shift in the spectrum centroid frequency, and spectral broadening of the received radar signals. The method uses a parameter that combines centroid frequency down shift and variance increase for the projection function to construct the tomography algorithm. In comparison with other methods for estimating attenuation, the frequency down shift method is relatively insensitive to the effects of geometric spreading, antenna coupling, antenna radiation pattern,and instrument response, but the method requires the data to be broad-band so the frequency shift is easily measured. This method is well suited for difference tomography when electrically conductive tracers are used. The method was tested using cross-hole radar data acquired before and during a saline tracer injection experiment at the U.S.Geological Survey’s Fractured Rock Research Site at Mirror Lake, in Grafton County, New Hampshire. The attenuation-difference tomogram clearly outlines the location of the saline tracer within the tomography plane.

New Hampshire↗