Search USGS⌕ Search

Geology topics

Research about England

Source-linked reports with geographic coverage including England.

9 recordsLinked to original sources
USGS2026

Characterisation of bituminite and testing reproducibility of vitrinite and bituminite reflectance measurements in organic‑carbon-rich intervals of the Kimmeridge Clay Formation: ICCP Identification of Dispersed Organic Matter Working Group round robin exercises

Three round robin exercises (RRE) aimed at characterizing bituminite and testing the reproducibility of random vitrinite (VR o %) and bituminite (BitR o %) reflectance measurements on samples of dispersed organic matter from organic‑carbon rich shale intervals of Kimmeridge Clay Formation were conducted in 2016, 2018, and 2020. This work was conducted by the Identification of Dispersed Organic Matter Working Group (IDOM WG) of the International Committee for Coal and Organic Petrology (ICCP). The Kimmeridge Clay Formation represents the major marine source rock for the North Sea hydrocarbon province. Samples collected from Kimmeridge Bay, Dorset, England, United Kingdom and Filey Bay, North Yorkshire, England, United Kingdom outcrops and the 16/17–14 well in the Tiffany oil field, Viking Graben, North Sea, were analyzed by 19 to 23 participants in 15 to 17 laboratories from 14 to 15 countries. Samples contain moderate to high organic matter content [5.32 to 12.10 wt% total organic carbon (TOC) content] with thermal maturity ranging from immature to thermally mature (T max 418 to 445 °C). Participants used a standard description sheet to record bituminite morphological characteristics, including its form, size, mode of appearance, and impurities, for use in the revision of the bituminite definition. The usage of previously published classifications of bituminite types (e.g., bituminite I sensu Teichmüller and Ottenjann, 1977 ) in the RRE was not found to be helpful. The indistinct, amorphous character of boundaries of bituminite, and the poor preparation of whole rock pellets for the 2018 and 2020 RRE hampered identification of bituminite. Mean random BitR o %, including outlying values, varied in all three RRE from 0.19 to 0.35% and is reported here for the first time. Application of the criterion standard deviation (SD) < 0.15 × BitR o % to exclude outlying BitR o % values showed virtually no change in modified BitR o % in immature samples (2016 and 2018 RRE) and an unexpected increase to 0.43% BitR o in the thermally mature sample (2020 RRE). Mean VR o values, including outliers in the three RRE, range from 0.47 to 0.71%, confirming the immature to thermally mature nature of samples of the Kimmeridge Clay Formation used in this study. Application of the criterion SD < 0.15 × VR o to exclude outlying values results in a comparable range of modified VR o values and a decrease in group standard deviation. Precision of VR o values (including outlying values) evaluated via the averaged unsigned multiple of the standard deviation rule (< 1.5) showed moderate to high precision comparable to historical values from similar RRE. An average reproducibility limit (RL) of 0.29% (including outlying values) showed an improvement in reproducibility relative to similar historical RRE (0.35%), which was attributed to the application of a common methodology (ASTM D7708, 2014b, 2023) to enhance the quality of data from the reflectance test method.

Kimmeridge Bay↗
USGS2022

Characterization of bituminite in Kimmeridge Clay by confocal laser scanning and atomic force microscopy

This work investigates bituminite (amorphous sedimentary organic matter) in Upper Jurassic Kimmeridge Clay source rock via confocal laser scanning microscopy (CLSM) and atomic force microscopy (AFM). These petrographic tools were used to provide better understanding of the nature of bituminite, which has been historically difficult to identify and differentiate from similar organic matter types in source rocks. As part of an International Committee for Coal and Organic Petrology (ICCP) working group, an immature (0.42% vitrinite reflectance), organic-rich (44.1 wt% total organic carbon content) sample of Kimmeridge Clay was distributed to multiple laboratories for CLSM characterization. The primary observations from CLSM imaging and spectroscopy include: 1) the interpreted presence of Botryococcus algae as a contributor to bituminite precursors; 2) color red-shift of sulfide reflectance and bituminite auto-fluorescence from below the sample surface; 3) positive alteration of bituminite from laser-induced photo-oxidation of the sample surface, including fluorescence blue-shift; 4) fluorescence blue-shift associated to higher fluorescence intensity regions in bituminite indicative of compositional (fluorophore) differences; 5) the need for fluorescence spectroscopy standardization as applied via CLSM; and 6) the suitability of CLSM fluorescence spectroscopy to predict solid bitumen reflectance from bituminite spectral emission via calibration to an extant dataset. Secondary CLSM observations include detection of reflected laser light from highly reflective inclusions in bituminite, including sulfides and fusinite, and radiolytic alteration of bituminite caused by substitution of U for Fe in sulfides. Findings from AFM include the observation that surface roughening or surface flattening of bituminite are induced by differential broad ion beam (BIB) milling and are dependent on the location and scale of AFM topology measurement. This result highlights our still limited understanding of the effects of BIB milling on sedimentary organic matter and indicates the need for further research before this technique can be advanced as a standard practice in petrographic sample preparation. Collectively, the results of this study illustrate the general applicability and versatility of AFM and CLSM as tools for organic petrology research, specifically for better understanding of the nature and properties of the bituminite maceral.

Kimmeridge↗
USGS2020

Critical shifts in trace metal transport and remediation performance under future low river flows

Exceptionally low river flows are predicted to become more frequent and more severe across many global regions as a consequence of climate change. Investigations of trace metal transport dynamics across streamflows reveal stark changes in water chemistry, metal transformation processes, and remediation effectiveness under exceptionally low-flow conditions. High spatial resolution hydrological and water quality datasets indicate that metal-rich groundwater will exert a greater control on stream water chemistry and metal concentrations because of climate change. This is because the proportion of stream water sourced from mined areas and mineralized strata will increase under predicted future low-flow scenarios (from 25% under Q45 flow to 66% under Q99 flow in this study). However, mineral speciation modelling indicates that changes in stream pH and hydraulic conditions at low flow will decrease aqueous metal transport and increase sediment metal concentrations by enhancing metal sorption directly to streambed sediments. Solute transport modelling further demonstrates how increases in the importance of metal-rich diffuse groundwater sources at low flow could minimize the benefits of point source metal contamination treatment. Understanding metal transport dynamics under exceptionally low flows, as well as under high flows, is crucial to evaluate ecosystem service provision and remediation effectiveness in watersheds under future climate change scenarios.

Environmental Science & Technology↗
USGS2019

U-Pb geochronology of tin deposits associated with the Cornubian Batholith of southwest England: Direct dating of cassiterite by in situ LA-ICPMS

The Cornwall and Devon vein- and greisen-type copper and tin deposits of southwest England are spatially and genetically related to shallow-seated granitic intrusions. These late Variscan intrusions, collectively known as the Cornubian Batholith, extend over 200 km and form a continuous granitic spine from the Isles of Scilly Granite in the west to the Dartmoor Granite in the east. The granitic plutons of the Cornubian Batholith were intruded from ~ 295 to 270 Ma without a major hiatus. Twelve samples of cassiterite (SnO 2 ) were obtained from tin deposits associated with seven different plutons within the Cornubian Batholith for in situ LA-ICPMS U–Pb dating. This study of cassiterite was undertaken to obtain the first results of direct dating of ore mineral to refine the geochronology of tin mineralization in this region. Of the cassiterite samples analyzed, the oldest ages were determined within the Kit Hill and Hingston–Gunnislake Granites in the central part of the Cornubian Batholith. The Hingston–Gunnislake cassiterite, from Drakewalls Mine, was the oldest sample dated at 291.8 ± 3.4 Ma. The next oldest dates, 290.5 ± 2.8 and 288.5 ± 2.9 Ma, were from two cassiterite samples extracted from the adjacent Kit Hill Consolidated Mines within the Kit Hill Granite. At the eastern end of the study area, two cassiterite samples within the Dartmoor Granite produced ages of 286.0 ± 1.8 and 284.1 ± 1.3 Ma. The youngest sample from this study, 275.4 ± 1.6 Ma, is from the Balleswidden Mine within the westernmost Land’s End Granite. The cassiterite dates do not reveal any readily observable relationship between ore ages and geographic relationship from west to east throughout the Cornubian Batholith. Incorporating the associated errors, the geochronology does indicate continuous mineralization within the granites for ~ 21 million years, from ca. 295 to 274 Ma. This span falls within the established period of granitic magmatism of ca. 295 to 270 Ma for the Cornubian Batholith and further confirms the reliability of in situ LA-ICPMS U–Pb dating of cassiterite.

Mineralium Deposita↗
USGS1990

The laser microprobe mass analyser for determining partitioning of minor and trace elements among intimately associated macerals: An example from the Swallow Wood coal bed, Yorkshire, UK

A study of the elemental composition of intimately associated coal macerals in the English Swallow Wood coal bed was conducted using a laser microprobe mass analyser, and indicated a similar trace and minor elemental chemistry in the vitrinite and cutinite and a different elemental signature in the fusinite. Three to six sites were analysed within each maceral during the study by laser micro mass spectrometry (LAMMS). Al, Ba, Ca, Cl, Cr, Dy, F, Fe, Ga, K, Li, Mg, Na, S, Si, Sr, Ti, V, and Y were detected by LAMMS in all three macerals but not necessarily at each site analysed. The signal intensities of major isotopic peaks were normalized to the signal intensity of the m z "> mz 85 peak (C 7 H) to determine the relative minor- and trace-element concentrations among the three dominant macerals. The vitrinite and the cutinite were depleted in Ba, Ca, Dy, Li, Mg, Sr, and Y relative to their concentrations observed in the fusinite. The cutinite was distinguished over vitrinite by less Ti, V, Cr and Ca, and K Ca $ &#x306; 1 "> KCa$1 (relative signal intensities). The fusinite, relative to the cutinite and vitrinite, was relatively depleted in Cr, Sc, Ti, and V. The fusinite, as compared with both the cutinite and vitrinite, was relatively enriched in Ba, Ca, Dy, Li, Mg, Sr, and Y, and also showed the most intense m z "> mz 64, 65, 66 signals (possibly S 2 + , HS 2 + , H 2 S 2 + , respectively). The LAMMS data indicate a common source for most elements and selective loss from the maceral precursors in the peat or entrapment of certain elements as mineral matter, most likely during the peat stage or during early diagenesis. The relatively high amounts of Ba, Ca, Dy, Li, Mg, Sr, and Y in the fusinite are consistent with micron and submicron mineral-matter inclusions such as carbonates and Ca-Al phosphates (probably crandallite group minerals). Mineralogical data on the whole coal, the LAMMS chemistry of the vitrinite and cutinite, and scanning electron microscopy/energy dispersive X-ray analysis (SEM/EDAX) of the elements in the macerals are consistent with the presence of micron and submicron inclusions of clays such as kaolinite, illite, and Ca-rich or Ca-bearing minerals (e.g. calcite, Ca-Al phosphates, and illite) which are different in kind and proportions in the three macerals. The variance as measured by the F -statistic for all three macerals indicates generally a nonuniform distribution of minor and trace elements in all three macerals, thus supporting a mineral-matter (inorganic) origin of the elements analysed. Exceptions are Al, K, Fe, Ga, and Sr in the vitrinite and cutinite, which is consistent with organic complexing or a uniform distribution of micron or submicron mineral matter such as illite and phosphate(s).

Yorkshire↗
USGS1979

The flow mechanism in the Chalk based on radio-isotope analyses of groundwater in the London Basin

14 C analyses of groundwaters from the Chalk of the London Basin are re-interpreted and the age of the groundwater is revised. Radio-isotope analyses are used to examine the flow mechanism in the aquifer. The evidence supports the view that a network of micro-fissures and larger intergranular pores in the matrix provides a significant part of the water pumped from Chalk wells and the major fissures distribute the water to the wells. Most of the matrix is fine-grained and contains a very old water. This diffuses into the micro-fissures and larger pores and is carried to the wells by the major fissures.

southeast England↗
USGS1977

The age of groundwater in the Lincolnshire Limestone, England and its relevance to the flow mechanism

Groundwater samples from the Lincolnshire Limestone have been analysed for tritium, radiocarbon, and the stable-isotope ratios 13 C 12 C "> 13 C 12 C , 18 O 16 O "> 18 O 16 O and D/H. The age of the water increases in a downgradient direction below overlying confining deposits and reaches a maximum age greater than 25,000 years within 15 km of the outcrop. The δ 13 C ratio ultimately attains the unusually low negative values of −2‰ in a downgradient direction; this is approaching that of the aquifer matrix which is +2.35‰. The reason is believed to be exchange of carbon between the groundwater and the matrix by a continuous process of precipitation and further solution of calcium carbonate. The δ 18 O and δ D ratios imply that recharge of the aquifer during the late Pleistocene took place in the spring and autumn rather than the winter as at present. The data are interpreted by assuming that movement of water through the saturated zone is a combination of flow in fissures and “piston flow” through the micro-fissures and pores of the rock. The mechanism of water movement in the saturated zone is dominated by relatively rapid flow in fissures, but the fissure flow includes a contribution of much older water from “intergranular” storage which enters the fissures from the rock matrix by pressure differentials in the fissure distribution system and by diffusion. The distribution of water of different ages in the aquifer is closely related to recent groundwater abstraction patterns.

Journal of Hydrology↗
USGS1969

Peridotite-gabbro complexes as keys to petrology of mid-oceanic ridges

Two suites of olivine-rich ultramafic and feldspathic rocks appear to be present in the Mid-Atlantic Ridge: one which seems to have alkalic affinities, and one similar to the chromitite- bearing alpine peridotite-gabbro complexes. The similarities of rocks in the two environments—continental and oceanic—imply that much about the petrology of mid-oceanic ridges may be learned from studies of continental complexes, and that silicic rocks have been formed in the mantle. Although gabbros in St. Paul Rocks and similar rocks at Tinaquillo, Venezuela, and Lizard, England, have been interpreted as not comagmatic with intimately associated peridotite by some petrologists, evidence to the contrary at Lizard is discussed. Association of fresh gneissic gabbro, some containing quartz, with talcose serpentinite, amphibole schist, quartz diorite and epidotic but unsheared basalts along the Mid-Atlantic Ridge is believed to indicate presence of alpine-type rocks that occur normally in eugeosynclinal belts. Gabbro, described as partly interlayered with peridotite by gravitational differentiation, forms major parts of three widely separated ultramafic complexes which have been interpreted as slices of oceanic crust and upper mantle: the Troodos massif in Cyprus, the Bowutu Mountains in Papua, and the Camagiiey complex in central Cuba. If, as Dietz has suggested, peridotite and related rocks in eugeosynclines represent fragments of ocean rind formed along mid-oceanic ridges and moved laterally by ocean-floor spreading, gabbro must be an essential constituent of the upper mantle. This could account for many geophysical anomalies, but would complicate some postulated mechanisms involved in ocean-floor spreading.

England↗