Search USGS⌕ Search

Geology topics

Research about Colorado, Utah

Source-linked reports with geographic coverage including Colorado, Utah.

At least 55 records · Page 3Linked to original sources

Summary of fluvial sediment collected at selected sites on the Gunnison River in Colorado and the Green and Duchesne Rivers in Utah, Water Years 2005-2008

The Colorado River Basin provides habitat for 14 native fish, including four endangered species protected under the Federal Endangered Species Act of 1973 - Colorado pikeminnow (Ptychocheilus lucius), razorback sucker (Xyrauchen texanus), bonytail (Gila elegans), and humpback chub (Gila cypha). These endangered fish species once thrived in the Colorado River system, but water-resource development, including the building of numerous diversion dams and several large reservoirs, and the introduction of nonnative fish, resulted in large reductions in the numbers and range of the four species. Knowledge of sediment dynamics in river reaches important to specifc life-stages of the endangered fishes is critical to understanding the effects of flow regimes on endangered fish habitats. The U.S. Geological Survey, in cooperation with the Upper Colorado River Endangered Fish Recovery Program, Bureau of Reclamation, U.S. Fish and Wildlife Service, and Wyoming State Engineer's Office, implemented daily sediment sampling at three locations in critical habitat reaches in the Upper Colorado River Basin. This report presents a summary of data collected at these sites, including water and suspended-sediment discharge, streambed compositions, and channel and flood-plain topography. The locations are at U.S. Geological Survey streamflow-gaging stations 09152500, Gunnison River near Grand Junction, Colorado; 09261000, Green River near Jensen, Utah; and 09302000, Duchesne River near Randlett, Utah.

Colorado, Utah↗

Application of morphologic burrow interpretations to discern continental burrow architects: Lungfish or crayfish?

A methodology for trace fossil identification using burrowing signatures is tested by evaluating ancient and modern lungfish and crayfish burrows and comparing them to previously undescribed burrows in a stratigraphic interval thought to contain both lungfish and crayfish burrows. Permian burrows that bear skeletal remains of the lungfish Gnathorhiza , from museum collections, were evaluated to identify unique burrow morphologies that could be used to distinguish lungfish from crayfish burrows when fossil remains are absent. The lungfish burrows were evaluated for details of the burrowing mechanism preserved in the burrow morphologies together forming burrowing signatures and were compared to new burrows in the Chinle Formation of western Colorado to test the methodology of using burrow signatures to identify unknown burrows. Permian lungfish aestivation burrows show simple, nearly vertical, unbranched architectures and relatively smooth surficial morphologies with characteristic quasi‐horizontal striae on the burrow walls and vertical striae on the bulbous terminus. Burrow lengths do not exceed 0.5 m. In contrast, modern and ancient crayfish burrows exhibit simple to highly complex architectures with highly textured surficial morphologies. Burrow lengths may reach 4 to 5 m. Burrow morphologies unlike those identified in Gnathorhiza aestivation burrows were found in four burrow groups from museum collections. Two of these groups exhibit simple architectures and horizontal striae that were greater in sinuosity and magnitude, respectively. One of these burrows contains the remains of Lysoro‐phus , but the burrow surface reveals no reliable surficial characteristics. It is not clear whether Lysorophus truly burrowed or merely occupied a pre‐existing structure. The other two groups exhibit surficial morphologies similar to those found on modern and ancient crayfish burrows and may provide evidence of freshwater crayfish in the Permian. Burrows from the Upper Triassic Chinle Formation in western Colorado exhibit simple to moderately complex architectural morphologies, ranging from predominantly vertical, unbranched, with little or no chamber development to predominantly vertical, few branches, and with minor chamber development. Surficial burrow morphologies are moderate to highly textured. The burrows have scrape marks, scratch marks, mud and lag‐liners, knobby surfaces, pleopod striae, and body impressions. Although no fossil remains of the burrowing organism were found within or associated with the Chinle burrows from western Colorado, the similarity of architectural and surficial burrow morphologies to those in the Chinle of Canyonlands, Utah and to modern crayfish burrows, clearly indicates that the Colorado burrows are the product of burrowing crayfish rather than lungfish. Evaluation of burrowing signatures preserved in the architectural and surficial burrow morphologies is a very useful tool to compare and contrast Chinle burrows from different regions on the Colorado Plateau. Documentation of crayfish burrows in the Chinle of Utah and Colorado strongly suggests that other large‐diameter Chinle burrows elsewhere on the Colorado Plateau and in stratigraphically equivalent units may also be the product of crayfish activity.

Colorado, Utah↗

Results of chemical analyses of soil, shale, and soil/shale extract from the Mancos Shale formation in the Gunnison Gorge National Conservation Area, southwestern Colorado, and at Hanksville, Utah

Results of chemical and some isotopic analyses of soil, shale, and water extracts collected from the surface, trenches, and pits in the Mancos Shale are presented in this report. Most data are for sites on the Gunnison Gorge National Conservation Area (GGNCA) in southwestern Colorado. For comparison, data from a few sites from the Mancos landscape near Hanksville, Utah, are included. Twelve trenches were dug on the GGNCA from which 258 samples for whole-rock (total) analyses and 187 samples for saturation paste extracts were collected. Sixteen of the extract samples were duplicated and subjected to a 1:5 water extraction for comparison. A regional soil survey across the Mancos landscape on the GGNCA generated 253 samples for whole-rock analyses and saturation paste extractions. Seventeen gypsum samples were collected on the GGNCA for sulfur and oxygen isotopic analysis. Sixteen samples were collected from shallow pits in the Mancos Shale near Hanksville, Utah.

Colorado, Utah↗

Facies analysis and sequence stratigraphic framework of upper Campanian strata (Neslen and Mount Garfield formations, Bluecastle Tongue of the Castlegate Sandstone, and Mancos Shale), Eastern Book Cliffs, Colorado and Utah

Facies and sequence-stratigraphic analysis identifies six high-resolution sequences within upper Campanian strata across about 120 miles of the Book Cliffs in western Colorado and eastern Utah. The six sequences are named after prominent sandstone units and include, in ascending order, upper Sego sequence, Neslen sequence, Corcoran sequence, Buck Canyon/lower Cozzette sequence, upper Cozzette sequence, and Cozzette/Rollins sequence. A seventh sequence, the Bluecastle sequence, is present in the extreme western part of the study area. Facies analysis documents deepening- and shallowing- upward successions, parasequence stacking patterns, downlap in subsurface cross sections, facies dislocations, basinward shifts in facies, and truncation of strata.All six sequences display major incision into shoreface deposits of the Sego Sandstone and sandstones of the Corcoran and Cozzette Members of the Mount Garfield Formation. The incised surfaces represent sequence-boundary unconformities that allowed bypass of sediment to lowstand shorelines that are either attached to the older highstand shorelines or are detached from the older highstand shorelines and located southeast of the main study area. The sequence boundary unconformities represent valley incisions that were cut during successive lowstands of relative sea level. The overlying valley-fill deposits generally consist of tidally influenced strata deposited during an overall base level rise. Transgressive surfaces can be traced or projected over, or locally into, estuarine deposits above and landward of their associated shoreface deposits. Maximum flooding surfaces can be traced or projected landward from offshore strata into, or above, coastal-plain deposits. With the exception of the Cozzette/Rollins sequence, the majority of coal-bearing coastal-plain strata was deposited before maximum flooding and is therefore within the transgressive systems tracts. Maximum flooding was followed by strong progradation of parasequences and low preservation potential of coastal-plain strata within the highstand systems tract. The large incised valleys, lack of transgressive retrogradational parasequences, strong progradational nature of highstand parasequences, and low preservation of coastal-plain strata in the highstand systems tracts argue for relatively low accommodation space during deposition of the Sego, Corcoran, and Cozzette sequences. The Buck Canyon/Cozzette and Cozzette/Rollins sequences contrast with other sequences in that the preservation of retrogradational parasequences and the development of large estuaries coincident with maximum flooding indicate a relative increase in accommodation space during deposition of these strata. Following maximum flooding, the Buck Canyon/Cozzette sequence follows the pattern of the other sequences, but the Cozzette/Rollins sequence exhibits a contrasting offlapping pattern with development of offshore clinoforms that downlap and eventually parallel its maximum flooding surface. This highstand systems tract preserves a thick coal-bearing section where the Rollins Sandstone Member of the Mount Garfield Formation parasequences prograde out of the study area, stepping up as much as 800 ft stratigraphically over a distance of about 90 miles. This progradational stacking pattern indicates a higher accommodation space and increased sedimentation rate compared to the previous sequences.

Colorado, Utah↗

Petroleum systems and geologic assessment of oil and gas in the Uinta-Piceance Province, Utah and Colorado

The purpose of the U.S. Geological Survey's (USGS) National Oil and Gas Assessment is to develop geology-based hypotheses regarding the potential for additions to oil and gas reserves in priority areas of the United States, focusing on the distribution, quantity, and availability of oil and natural gas resources. The USGS has recently completed an assessment of the undiscovered oil and gas potential of the Uinta-Piceance Province of northeastern Utah and northwestern Colorado (USGS Province 5020). The Uinta- Piceance Province is a priority province for the National Assessment because of its potential for significant natural gas resources. The assessment of this province is based on geologic principles and uses the total petroleum system concept. The geologic elements of a total petroleum system include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy, petrophysical properties), and hydrocarbon traps (trap formation and timing). In the Uinta-Piceance Province, the USGS used this geologic framework to define five total petroleum systems and 20 assessment units within the total petroleum systems, and quantitatively estimated the undiscovered oil and gas resources within each assessment unit. Many more details about the project and about individual chapters of this report are readily available in the very readable Chapter 2 of this volume, 'The Uinta-Piceance Province-Introduction to a geologic assessment of undiscovered oil and gas resources.' Use Acrobat Reader to access the PDF for this chapter.

Colorado, Utah↗

Assessment of Undiscovered Oil and Gas Resources of the Uinta-Piceance Province of Colorado and Utah, 2002

The U.S. Geological Survey (USGS) recently completed an assessment of the undiscovered oil and gas potential of the UintaPiceance Province of northwestern Colorado and northeastern Utah (fig. 1). The assessment of the Uinta-Piceance Province is geology based and uses the Total Petroleum System concept. The geologic elements of Total Petroleum Systems include hydrocarbon source rocks (source rock maturation, hydrocarbon generation and migration), reservoir rocks (sequence stratigraphy, petrophysical properties), and hydrocarbon traps (trap formation and timing). Using this geologic framework, the USGS defined five Total Petroleum Systems and 20 Assessment Units within these Total Petroleum Systems, and quantitatively estimated the undiscovered oil and gas resources within each Assessment Unit (table 1).

Colorado, Utah↗

Stratigraphy of the Upper Cretaceous Mancos Shale (upper part) and Mesaverde Group in the southern part of the Uinta and Piceance basins, Utah and Colorado

Cross section A–A' was constructed in support of the oil and gas assessments of the Mesaverde and Mancos/Mowry Total Petroleum Systems in the Uinta and Piceance Basins of Utah and Colorado (fig. 1) (U.S. Geological Survey Uinta-Piceance Province Assessment Team, in press). This citation is referred to henceforth as simply “USGS, in press.” The Mesaverde Total Petroleum System contains continuous gas derived primarily from carbonaceous shale and coal in the Mesaverde Group [chapter by Johnson and Roberts in USGS (in press)]. The Mancos/Mowry Total Petroleum System contains continuous gas derived primarily from marine source rocks in the Mancos and Mowry Shales [chapter by Kirschbaum in USGS (in press)]. Cross section A–A' illustrates the stratigraphy of these Upper Cretaceous rocks, emphasizing the fluvial, coal-bearing coastal plain, nearshore marine, and offshore marine strata. The cross section is presented as a hard copy in this report and as a chapter by Hettinger and Kirschbaum (USGS, in press).

Colorado, Utah↗

Burial and thermal history of the Paradox Basin, Utah and Colorado, and petroleum potential of the Middle Pennsylvanian Paradox Formation

The Ismay-Desert Creek interval and Cane Creek cycle of the Alkali Gulch interval of the Middle Pennsylvanian Paradox Formation in the Paradox Basin of Utah and Colorado contain excellent organic-rich source rocks having total organic carbon contents ranging from 0.5 to 11.0 percent. The source rocks in both intervals contain types I, II, and III organic matter and are potential source rocks for both oil and gas. Organic matter in the Ismay-Desert Creek interval and Cane Creek cycle of the Alkali Gulch interval (hereinafter referred to in this report as the "Cane Creek cycle") probably is more terrestrial in origin in the eastern part of the basin and is interpreted to have contributed to some of the gas produced there. Thermal maturity increases from southwest to northeast for both the Ismay-Desert Creek interval and Cane Creek cycle, following structural and burial trends throughout the basin. In the northernmost part of the basin, the combination of a relatively thick Tertiary sedimentary sequence and high basinal heat flow has produced very high thermal maturities. Although general thermal maturity trends are similar for both the Ismay-Desert Creek interval and Cane Creek cycle, actual maturity levels are higher for the Cane Creek due to the additional thickness (as much as several thousand feet) of Middle Pennsylvanian section. Throughout most of the basin, the Ismay-Desert Creek interval is mature and in the petroleum-generation window (0.10 to 0.50 production index (PI)), and both oil and gas are produced; in the south-central to southwestern part of the basin, however, the interval is marginally mature (<0.10 PI) for petroleum generation, and mainly oil is produced. In contrast, the more mature Cane Creek cycle contains no marginally immature areas—it is mature (>0.10 PI) in the central part of the basin and is overmature (past the petroleum-generation window (>0.50 PI)) throughout most of the eastern part of the basin. The Cane Creek cycle generally produces oil and associated gas throughout the western and central parts of the basin and thermogenic gas in the eastern part of the basin. Burial and thermal-history models were constructed for six different areas of the Paradox Basin. In the Monument upwarp area, the least mature part of the basin, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.10 and 0.20 PI and were buried to 13,400 ft and 14,300 ft, respectively. A constant heat flow through time of 40 mWm -2 (milliwatts per square meter) is postulated for this area. Significant petroleum generation began at 45 Ma for the Ismay-Desert Creek interval and at 69 Ma for the Cane Creek cycle. In the area around the confluence of the Green and Colorado Rivers, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.20 and 0.25 PI and were buried to 13,000 ft and 14,200 ft, respectively. A constant heat flow through time of 42 mWm -2 is postulated for this area. Significant petroleum generation began at 60 Ma for the Ismay-Desert Creek interval and at 75 Ma for the Cane Creek cycle. In the area around the town of Green River, Utah, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.60 and greater and were buried to 14,000 ft and 15,400 ft, respectively. A constant heat flow through time of 53 mWm -2 is proposed for this area. Significant petroleum generation began at 82 Ma for the Ismay-Desert Creek interval and at 85 Ma for the Cane Creek cycle. Around Moab, Utah, in the deeper, eastern part of the basin, the Ismay-Desert Creek interval and Cane Creek cycle have thermal maturities of 0.30 and around 0.35 PI and were buried to 18,250 ft and 22,000 ft, respectively. A constant heat flow through time of 40 mWm -2 is postulated for this area. Significant petroleum generation began at 79 Ma for the Ismay-Desert Creek interval and at 90 Ma for the Cane Creek cycle. At Lisbon Valley, also in the structurally deeper part of the basin, the Ismayy–Desert Creek interval and Cane Creek cycle have thermal maturities of 0.30 and greater than 0.60 PI and were buried to 15,750 ft and 21,500 ft, respectively. A constant heat flow through time of 44 mWm –2 is postulated for this area. Significant petroleum generation began at 79 Ma for the Ismay–Desert Creek interval and at 100 Ma for the Cane Creek cycle. The area around Hermosa, Colo., in the southeastern part of the basin, has experienced a shallower burial history than the other areas in the basin, yet it has one of the highest thermal maturities. Here, the Ismay–Desert Creek interval and Cane Creek cycle have vitrinite reflectance values of 1.58 and 1.63 percent and were buried to 13,700 ft and 15,500 ft, respectively. Due to Tertiary igneous activity in this part of the basin, a variable heat flow is proposed: from 600 to 30 Ma, 45 mWm –2 ; from 30 to 25 Ma, 63 mWm –2 ; and from 25 Ma to present, 50 mWm –2 . Significant petroleum generation began at 72 Ma for the Ismay–Desert Creek interval and at 76 Ma for the Cane Creek cycle.

Colorado, Utah↗

Bibliography, indices, and data sources of water-related studies, upper Colorado River basin, Colorado and Utah, 1872-1995

As part of the U.S. Geological Survey's National Water-Quality Assessment Program, current water-quality conditions in the Upper Colorado River Basin in Colorado and Utah are being assessed. This report is an initial effort to identify and compile information on water-related studies previously conducted in the basin and consists of a bibliography, coauthor and subject indices, and sources of available water-related data. Computerized literature searches of scientific data bases were carried out to identify past water-related studies in the basin, and government agencies and private organizations were contacted regarding their knowledge or possession of water-related publications and data. Categories of information in the bibliography include: aquatic biology, climate, energy development, geology, land use, limnology, runoff, salinity, surface- and ground-water hydrology, water chemistry, water quality and quantity, and water use and management. The approximately 1,400 indexed references date from 1872 through February 1995 and include books, journal articles, maps, and reports. In many instances, an abstract has been provided for a given reference. Sources of water-related data in the basin are included in a table.

Colorado, Utah↗