Search USGS⌕ Search

Geology topics

Research about Colorado Plateau

Source-linked reports with geographic coverage including Colorado Plateau.

At least 73 records · Page 4Linked to original sources

Proceedings of the third biennial conference of research on the Colorado Plateau

The papers in this volume are contributions from federal, state, and private sector researchers, who have come together to share scientific information with land managers on the Colorado Plateau. This Proceedings is the third in a series of publications that focuses on providing information to land managers on baseline scientific information pertaining to physical, cultural and biological resources of the Colorado Plateau. Support for these studies came from a spectrum of federal, state, and private partners concerned about the well-being of the Plateau's resources. I applaud the effort of the contributors. With modest funding and a broad base of public and institutional support, these authors have pursued important lines of work in the four states that comprise the Colorado Plateau biogeographic region.

Arizona, Colorado, New Mexico, Utah↗

Proceedings of the second biennial conference on research in Colorado Plateau National Parks

On 25-28 October 1993 in Flagstaff, Arizona, the National Biological Service Colorado Plateau Research Station (formerly National Park Service Cooperative Park Studies Unit) and Northern Arizona University hosted the Second Biennial Conference of Research on the Colorado Plateau. The conference theme focused on research, inventory, and monitoring on the federal, state, and private lands in the Colorado Plateau biogeographic province.

Utah;Colorado;Arizona;New Mexico↗

Molluscan paleoecology and sedimentation patterns of the Cenomanian-Turonian extinction interval in the southern Colorado Plateau region

Lithology, carbonate and organic carbon geochemistry, and molluscan macrofauna were investigated in fine-grained clay-dominated strata spanning the Cenomanian-Turonian Stage boundary in the southern Colorado Plateau region. Analyses of these data show basinal and onshore to offshore changes in sedimentologic and molluscan assemblage trends through the upper Cenomanian Sciponoceras gracile and Neocardioceras juddii and lower Turonian Watinoceras coloradoense Biozones. Diverse infaunal/epifaunal bivalve assemblages are best developed in the Sciponoceras gracile Biozone and at the more clay-rich nearshore sections. Gastropod and infaunal bivalve abundance and diversity decrease in an offshore and up-section direction as carbonate and organic carbon percentages generally increase. The Neocardioceras juddii Biozone precedes the stage boundary and is characterized in Utah and Arizona by pulsed increases in organic carbon and detrital-feeding gastropods, and by a shift in infaunal bivalve dominance toward species adapted for soft-substrate conditions. These data suggest that pulses of increased organic detrital resources and decreased substrate firmness were associated with the stage boundary extinctions. The stage boundary is marked by a change to depauperate epifaunal assemblages at western sections. At all sections, the base of the Watinoceras coloradoense Biozone is reflected by an abrupt increase in carbonate and decrease in organic carbon percentages as well as by the immigration of Mytiloides bivalves. Periods of progressive recovery through this biozone were associated with carbonate-rich depositional periods.

Arizona, Colorado, New Mexico, Utah↗

Maps showing the distribution of uranium-deposit clusters in the Colorado Plateau uranium province

The Colorado Palteau Uranium Province (CPUP) is defined by the distribution of uranium deposits, chiefly the sandstone-type, in upper Paleozoic and Mesozoic sedimentary rocks within the Colorado Plateau physiographic province (Granger and others, 1986). The uranium province is bordered by widely distributed and mostly minor uranium deposits in Precambrian and Tertiary rocks and by outcrops of Tertiary extrusive and intrusive igneous rocks.

Colorado Plateau↗

Paleomagnetism and tectonic rotation of the lower Miocene Peach Springs Tuff: Colorado Plateau, Arizona, to Barstow, California

We have determined remanent magnetization directions of the lower Miocene Peach Springs Tuff at 41 localities in western Arizona and southeastern California. An unusual northeast and shallow magnetization direction confirms the proposed geologic correlation of isolated outcrops of the tuff from the Colorado Plateau to Barstow, California, a distance of 350 km. The Peach Springs Tuff was apparently emplaced as a single cooling unit about 18 or 19 Ma and is now exposed in 4 tectonic provinces west of the Plateau, including the Transition Zone, Basin and Range, Colorado River extensional corridor, and central Mojave Desert strike-slip zone. As such, the tuff is an ideal stratigraphic and structural marker for paleomagnetic assessment of regional variations in tectonic rotations about vertical axes. From 4 sites on the stable Colorado Plateau, we have determined a reference direction of remanent magnetization (I = 36.4°, D = 33.0°, α 95 = 3.4°) that we interpret as a representation of the ambient magnetic field at the time of eruption. A steeper direction of magnetization (I = 54.8°, D = 22.5°, α 95 = 2.3°) was observed at Kingman where the tuff is more than 100 m thick, and similar directions were determined at 7 other thick exposures of the Peach Springs Tuff. The steeper component is presumably a later-stage magnetization acquired after prolonged cooling of the ignimbrite. When compared to the Plateau reference direction, tilt-corrected directions from 3 of 6 sites in the central Mojave strike-slip zone show localized rotations up to 13° in the vicinity of strike-slip faults. The other three sites show no significant rotations with respect to the Colorado Plateau. Both clockwise and counterclockwise rotations were measured, and no systematic regional pattern is evident. Our results do not support kinematic models which require consistent rotation of large regions to accommodate the cumulative displacement of major post-middle Miocene strike-slip faults in the central Mojave Desert. Most of our sites in the Transition Zone and Basin and Range province have had no significant rotation, although small counterclockwise rotation in the McCullough and New York Mountains may be related to sinistral shear along en echelon faults southwest of the Lake Mead shear zone. The larger rotations occur in the Colorado River extensional corridor, where 8 of 14 sites show rotations ranging from 37° clockwise to 51° counterclockwise. These rotations occur in allochthonous tilt blocks which have been transported northeastward above the Chemehuevi-Whipple Mountains detachment fault. Upper-plate blocks within 1 km of the exposed detachment unexpectedly show no significant rotation. From this relation, we infer that rotations are accommodated along numerous low-angle faults at higher structural levels above the detachment surface.

Arizona, California↗

Colorado Plateau

Field studies in the Colorado Plateau occupy an honored place in the development of geomorphic theory. The purpose of this chapter is to briefly review the foundational, regional, and process-oriented studies in the region, and to provide a review of promising threads of inquiry set in a context of more than a century of geomorphologic research in the region. The Colorado Plateau has sharply defined boundaries that separate it from neighboring geomorphic provinces (Fig. 1; for details see Thornbury, 1965). On the west, faults and the perimeters of volcanic plateaus mark the boundary between the Colorado Plateau and the Basin and Range Province. The boundary extends across the southern edge of the plateau where it is less radically defined, but is nonetheless visible on the surface in the form of an uplifted edge of sedimentary rocks known as the Mogollon Rim, which extends from northwest Arizona diagonally into north-central New Mexico. The eastern and northern boundaries are delineated by the contact between sedimentary rocks and upthrust or folded crystalline rocks of the Rocky Mountains. The plateau is a definable tectonic unit relatively easily separated from other provinces, but it shows considerable internal variation (Fig. 1; for details see Hunt, 1974a). The interior of the kidney-shaped Colorado Plateau Province reveals a series of subsections that depend on geologic and geomorphologic definition. The centrally located Canyon Lands Section is dominated by gently folded sedimentary rocks, while the western High Plateaus Section reveals widespread accumulations of volcanic materials.

Arizona, Colorado, New Mexico, Utah↗

Fluvial sedimentation on a quivering craton: Influence of slight crustal movements on fluvial processes, upper Jurassic Morrison formation, western Colorado Plateau

One of the most important challenges facing the fluvial sedimentologist is identification of processes outside the stream channel that influence deposition of fluvial sediments. Detailed studies in the lower sequence of the Salt Wash Member (Morrison Formation, Upper Jurassic) demonstrate that crustal deformation at the site of deposition may considerably influence braided-stream processes. Late Jurassic crustal movements in the western part of the Colorado Plateau are interpreted largely from thickness variations and facies distribution, but other features such as vertical repetition of facies, coincidence with at least parts of present-day folds, and the geographic distribution of bedding parameters measured in the fluvial deposits, are also used as corroborating evidence of syndepositional tectonism. These features indicate that several of the large uplifts and basins in the region as well as some of the smaller folds within them were actively moving during deposition of the lower sequence. Tectonic activity altered the stream gradients, which in turn governed sinuosity, flow regime, energy levels, and sediment distribution. Cross-bedding studies indicate that reduced gradients within downwarped areas led to slight increases in sinuosity of the braided-stream channels and of the small sub-channels within them. The lowered gradients apparently resulted in a decrease in the depth of the channels and allowed the streams to flood more readily, producing abundant upper-flow regime horizontal laminations in the channel deposits. In addition, greater quantities of sediment containing higher proportions of sand were deposited in downwarped areas than in positive localities. The inability of the streams to transport bed load through downwarped areas indicates loss of stream energy. However, an increase in the quantity of upper-flow regime horizontal laminations in the same downwarped areas suggests that an increase in flow regime is not necessarily accompanied by an increase in energy levels, at least in regions of slight tectonic activity where the local configuration of the stream channels may change appreciably. Strata presently dip less than 2° throughout most of the region, and this relatively small amount of deformation reflects the combined effects of Late Jurassic, Cretaceous and Tertiary tectonism. This demonstrates that the amount of structural deformation at the site of deposition may appear to be insignificant, yet it can cause appreciable changes in the nature of braided-stream deposits.

Arizona, Utah↗

Late Cenozoic uplift of the southwestern Colorado Plateau and adjacent lower Colorado River region

Rocks deposited near sea level under marine, estuarine, and lacustrine conditions, and located along the course of the lower Colorado River from the mouth of the Grand Canyon as far as the Mexican border, have been displaced to present positions as high as 880 m a.s.l. and as low as 1600 m b.s.l. The rocks include the marine and estuarine Bouse Formation and the lacustrine or marine Hualapai Limestone Member of the Muddy Creek Formation. A profile joining spot elevations that represent the highest erosional remnants of these rocks preserved at any one locality gives an approximation (in most cases a minimum value) for the uplift or downdropping of the region relative to sea level since about 5.5 m.y. ago, the K/Ar age of the most widespread and critical unit. The profile shows that most of the lower Colorado region has risen at least 550 m through broad and rather uniform upwarping and at an average rate of about 100 m/m.y. In addition to these 550 m, the nearby Colorado Plateau has risen by discrete movement along Wheeler fault, which is parallel to and about 8 km west of the plateau's edge, to a total uplift of at least 880 m, at a rate that may be as high as 160 m/m.y. Before warping and faulting, the top of the plateau was about 1100 m above the fill of adjacent basins; the top of this fill probably was at or a little below sea level. The profile shows two major south-facing rises in slope. The bigger one, near Yuma, occurs where the profile intersects the northwest-trending San Andreas-Salton trough system of faults; it is interpreted as rifting resulting from transcurrent movement along the faults. At the Mexican border, the base of the Bouse Formation is 1600 m b.s.l., which corresponds to a rate of subsidence since the beginning of Bouse time that may be as high as 290 m/.m.y. The top of the Bouse is at 1000 m b.s.l., corresponding to a rate of subsidence of about 180 m/m.y. In this area, the “older marine sedimentary rocks” of Olmsted et al., (1973) occur as much as 2100 m b.s.l. These rocks are evidence for marine invasion and deformation that predate the Bouse Formation. The second rise in slope occurs at the intersection with a regional northwest-trending lineament that separates widely different geologic terranes and is associated with extensive Miocene volcanism. This lineament may represent an old transform fault similar in geologic function to the present San Andreas system.

Arizona, California, Colorado, Nevada↗

Similarities, differences, and some genetic problems of the Wyoming and Colorado plateau types of uranium deposits in sandstone

Uranium deposits of the Wyoming roll type and the Colorado Plateau peneconcordant type are the principal domestic resources of uranium. Both types occur in lenticular sandstone beds of continental origin, have a similar suite of elements and minerals, are associated with mildly altered rock, and are thought to have formed by reduction precipitation from ground waters before significant regional deformation. They differ in several respects. The Wyoming deposits are in unlithified sandstone that is highly arkosic, whereas the Colorado Plateau deposits are in lithified sandstone that is only slightly to moderately arkosic. Uranium is the only ore metal in the Wyoming deposits, whereas vanadium or copper is more abundant than uranium in some of the Plateau deposits. The Wyoming deposits are elongate crescent-shaped bodies that extend vertically through, or partly through, a sandstone unit and which are scattered, like widely spaced beads on a string, along miles-long interfaces between oxidized (altered) and unoxidized sandstone, whereas the Plateau deposits are thin tabular layers that are nearly concordant to bedding and which occur as discrete bodies, like raisins in raisin bread, enveloped in rock altered by reduction. The Wyoming ore rolls and interfaces were dynamic, having been pushed downdip by downward-moving oxygen-bearing water that passed through the interfaces and deposited the ore minerals on the reducing side, whereas the Plateau deposits seemingly formed as static bodies, localized by intensive reducing "patches" in a mildly reducing environment. These differences focus attention on genetic problems relating to the Eh of the ore-bearing and altering solutions, the shape and localization of deposits, and the source of the uranium.

Arizona, Colorado, New Mexico, South Dakota, Utah,↗