Geology topics
Source-linked reports with geographic coverage including Bolivia.
In the Department of Beni, northeastern Bolivia , there are remnants of cultivated fields, roadways, and canals that are distributed over an area of 15,000 square miles. These features are interpreted as indicating the former existence of a highly organized, populous, agrarian society that antedates the culture of the Indian tribes now in the area.
This study produced a geospatial database for use in a decision support system by the Bolivian authorities to investigate further development and investment potentials in sustainable hydropower in Bolivia. The study assessed theoretical hydropower of all 1-kilometer (km) stream segments in the country using multisource satellite data and a hydrologic modeling approach. With the assessment covering the 2 million square kilometer (km 2 ) region influencing Bolivia’s drainage network, the potential hydropower figures are based on theoretical yield assuming that the systems generating the power are 100 percent efficient. There are several factors to consider when determining the real-world or technical power potential of a hydropower system, and these factors can vary depending on local conditions. Since this assessment covers a large area, it was necessary to reduce these variables to the two that can be modeled consistently throughout the region, streamflow or discharge, and elevation drop or head. First, the Shuttle Radar Topography Mission high-resolution 30-meter (m) digital elevation model was used to identify stream segments with greater than 10 km 2 of upstream drainage. We applied several preconditioning processes to the 30-m digital elevation model to reduce errors and improve the accuracy of stream delineation and head height estimation. A total of 316,500 1-km stream segments were identified and used in this study to assess the total theoretical hydropower potential of Bolivia. Precipitation observations from a total of 463 stations obtained from the Bolivian Servicio Nacional de Meteorología e Hidrología (Bolivian National Meteorology and Hydrology Service) and the Brazilian Agência Nacional de Águas (Brazilian National Water Agency) were used to validate six different gridded precipitation estimates for Bolivia obtained from various sources. Validation results indicated that gridded precipitation estimates from the Tropical Rainfall Measuring Mission (TRMM) reanalysis product (3B43) had the highest accuracies. The coarse-resolution (25-km) TRMM data were disaggregated to 5-km pixels using climatology information obtained from the Climate Hazards Group Infrared Precipitation with Stations dataset. About a 17-percent bias was observed in the disaggregated TRMM estimates, which was corrected using the station observations. The bias-corrected, disaggregated TRMM precipitation estimate was used to compute stream discharge using a regionalization approach. In regionalization approach, required homogeneous regions for Bolivia were derived from precipitation patterns and topographic characteristics using a k -means clustering approach. Using the discharge and head height estimates for each 1-km stream segment, we computed hydropower potential for 316,490 stream segments within Bolivia and that share borders with Bolivia. The total theoretical hydropower potential (TTHP) of these stream segments was found to be 212 gigawatts (GW). Out of this total, 77.4 GW was within protected areas where hydropower projects cannot be developed; hence, the remaining total theoretical hydropower in Bolivia (outside the protected areas) was estimated as 135 GW. Nearly 1,000 1-km stream segments, however, were within the boundaries of existing hydropower projects. The TTHP of these stream segments was nearly 1.4 GW, so the residual TTHP of the streams in Bolivia was estimated as 133 GW. Care should be exercised to understand and interpret the TTHP identified in this study because all the stream segments identified and assessed in this study cannot be harnessed to their full capacity; furthermore, factors such as required environmental flows, efficiency, economics, and feasibility need to be considered to better identify a more real-world hydropower potential. If environmental flow requirements of 20–40 percent are considered, the total theoretical power available reduces by 60–80 percent. In addition, a 0.72 efficiency factor further reduces the estimation by another 28 percent. This study provides the base theoretical hydropower potential for Bolivia, the next step is to identify optimal hydropower plant locations and factor in the principles to appraise a real-world power potential in Bolivia.
Cerro Rico de Potosi, Bolivia, is the world's largest silver deposit and has been mined since the sixteenth century for silver, and for tin and zinc during the twentieth century, together with by-product copper and lead. The deposit consists primarily of veins that cut an altered igneous body that we interpret to be a dacitic volcanic dome and its underlying tuff ring and explosion breccia. The deposit is compositionally and thermally zoned, having a core of cassiterite, wolframite, bismuthinite, and arsenopyrite surrounded by a peripheral, lower-temperature mineral assemblage consisting principally of sphalerite, galena, lead sulfosalt, and silver minerals. The low-temperature assemblage also was superimposed on the high-temperature assemblage in response to cooling of the main hydrothermal system. Both the dacite dome and the ore fluids were derived from a larger magmatic/hydrothermal source at depth. The dome was repeatedly fractured by recurrent movement on the fault system that guided its initial emplacement. The dome was extruded at 13.8 ± 0.2 Ma (2σ), based on U-Th-Pb dating of zircon. Mineralization and alteration occurred within about 0.3 my of dome emplacement, as indicated by a 40 Ar/ 39 Ar date of 13.76 ± 0.10Ma (1σ) for sericite from the pervasive quartz-sericite-pyrite alteration associated with the main-stage, high-temperature, mineralization. The last thermal event able to reset zircon fission tracks occurred no later than 12.5 ± 1.1 Ma (1σ), as indicated by fission-tract dating. Minor sericite, and magmatic-steam alunite veins, were episodically formed around 11 Ma and between 8.3 and 5.7 Ma; the younger episodes occurring at the time of extensional fracturing at Cerro Rico and wide-spread volcanism in the adjacent Los Frailes volcanic field. None of these younger events appear to be significant thermal/mineralizing events; the exceptionally flat thermal release pattern of 39 Ar from sericite and the results of the fission-tract dating of zircon show that none of the younger events was hot enough, and lasted long enough, to cause significant loss of Ar or annealing of zircon fission tracks. U-Th-Pb dating of zircon cores indicates a Precambrian progenitor for some zircons, and REE analyses of dated samples of hydrothermally altered dacite show the presence of a prominent positive Eu anomaly, which constrains interpretations of the origin and evolution of the magmatic/hydrothermal system.
No abstract available.
Preliminary investigations at Salar de Uyuni and the nearby salars (salt pans) of Coipasa and Empexa in the southern part of the Bolivian Altiplano show the presence of widespread lithium-rich brines. Widely scattered brine samples from Salar de Uyuni, which has an area of about 9000 km 2 and is the largest salt pan on earth, show lithium values ranging from 80 to 1500 ppm. High values of 300–700 ppm are most prevalent in an area of about 2500 km 2 in the east-central and southeastern part of the salar. A few brine samples in small areas in Coipasa and Empexa Salars have values ranging from 170 to 580 ppm Li. All the brines are essentially saturated with halite and are moderately high in sulfate (5000–15,000 ppm SO 4 ) but low in carbonate (<500 ppm HCO 3 ). Potassium and magnesium values are relatively high, chiefly in the range of 2000–20,000 ppm, and the K Mg "> KMg ratio is about 1:1. The Li K "> LiK and Li Mg "> LiMg ratios are relatively constant at about 1:20. The crystalline saline material and brines in these salars are residual from a former large lake, Lago Minchin, that occupied much of the southern Bolivian Altiplano during late Pleistocene time, augmented by saline material carried to the salars by streams since final drying of this lake. Thermal springs associated with rhyolitic volcanic rocks of Quaternary age may have been a major source of the lithium.
Colluma Crater, on the semiarid Altiplano (high plain) of western Bolivia, is an oval structure having overall dimensions of 6.7 km by 6.0 km. The structure has two almost concentric cuestaform rims (the inner rim is 3.6 km by 3.1 km) composed of poorly consolidated clastic sediments that dip outward. The center of the crater is about 80 m below the maximum height of the rims and about at the altitude of the surrounding plain. Because of the double rim, the centripetal drainage, and the absence of volcanic rocks, this structure is considered a collapsed dome. We believe it was probably formed by the doming of lower Quaternary (?) sediments by a subjacent igneous intrusion, partial retreat of the magma, collapse of the central part of the dome, erosional etching of the two rims, and partial filling of the center by detritus from the walls. Evidence for origin by impact (nickel-iron materials, shock structures, ejecta, and so forth) is lacking or was unrecognized, but this mode of origin is not rejected at this time. Geophysical surveys are recommended to determine whether the structure continues in depth and if an igneous, plug is below the crater.
Strongly oriented lineaments, defined by lake shores and stream and vegetation alignments, are distributed throughout more than 45,000 square miles of the Beni basin in northeastern Bolivia. The area in which these features occur is a flat, poorly drained, lake-studded plain. It is underlain by flat-lying, poorly consolidated, continental clastic sediments of Late Cenozoic age which, in turn, overlie crystalline basement. To the west the basin sediments abut abruptly against the folded and faulted Andean foothills and to the east they gradually overlap gently rolling crystalline outcrops of the Brazilian Shield. The main lineaments within the basin show preferred orientations perpendicular to each other in northwest-southeast and northeast-southwest directions. These two preferred directions of lineament orientation occur in sediments that extend from the margin of the Brazilian Shield westward 200 miles to where the basin sediments are 10,000 feet thick. Two poorly developed sets of lineaments that trend roughly north-south and east-west are also present within the basin. Most lakes are strongly rectilinear in outline with shores that commonly trend northwest-southeast and northeast-southwest. They range in size from about 1000 feet square to 5.4 by 12.4 miles. Only a few lakes have streams draining into or out of them. Those that have been studied on the ground are shallow with relatively flat bottoms and abrupt steep sides. The water surfaces are almost level with the surrounding flat terrain. The two major northwest-southeast and northeast-southwest trends are probably controlled by a regionally oriented system of longitudinal and cross fractures in the crystalline basement; the poorly developed north-south and east-west sets of lineaments may reflect basement “shear” fractures. The oriented lakes and many of the major northwest-southeast and northeast-southwest-trending lineaments occupy shallow surficial subsidences that appear to form by progressive downfaulting of basement blocks or differential compaction of uncon-solidated deposits over basement blocks. The minor north-south and east-west sets and some of the northwest-southeast and northeast-southwest-trending stream and vegetation lineaments may reflect individual fractures in the underlying basement rather than areal subsidence over basement blocks. The youthful appearance of some oriented features indicates that they are probably forming at the present. Because of the unique environment of the Beni basin, where alluvial deposits are accumulating over a relatively stable shield margin in an area of flat terrain and high water table, many of the subtle surficial depressions are clearly visible as lakes with orthogonally oriented shore lines. Lakes of comparable size, shape, and degree of orientation are known to occur elsewhere only in the Old Crow Plain area of Canada. It is postulated that prelithification fractures, such as those in the Beni basin, must play a significant role during compaction, jointing, faulting, and folding of sedimentary sequences. Criteria are needed to distinguish between fracture trends that are inherited from basement rocks, and those formed by postdepositional deformation.