Geology topics

Yoshihiro Konno

Publications and source records attributed to Yoshihiro Konno.

3 recordsLinked to original sources

USGS2019

Permeability variation and anisotropy of gas hydrate-bearing pressure-core sediments recovered from the Krishna–Godavari Basin, offshore India

Permeability measurements were conducted on gas hydrate-bearing pressure-core sediments recovered from the Krishna-Godavari Basin during India's National Gas Hydrate Program Expedition 02. Pressure cores collected in the deep seabed of the Indian Ocean were cut and stored under high pressure and low temperature on the D/V Chikyu using pressure core analyzing tools. A total of 25 1.2-m storage chambers were transferred to Japan from India for pressure core studies using pressure-core analysis tools at the National Institute of Advanced Industrial Science and Technology. The sediment core's pressure and temperature were maintained within the hydrate stability conditions during the entire process of transfer and loading into a triaxial testing apparatus called TACTT, which can simulate the in-situ stress state under triaxial conditions. The hydrate saturation of the samples was in the range of 50¬90%. It was found that the initial effective water permeability was in range of 0.01 mD to tens of mD, depending on the hydrate saturation and the mean particle size of the host sediment. The hydrate pore space morphology is also a critical factor, and results suggest hydrates are forming in the pore centers, but also as a sediment grain coating. In a first for gas hydrate-bearing pressure cores, the permeability anisotropy was established via vertical and horizontal flow tests combined with a pore fluid flow simulation. The horizontal/vertical permeability ratio was found to be 4. Additionally, the effective stress dependency of permeability was investigated by performing flow tests at different effective stresses. Due to decreasing porosity and particle crushing, the permeability dropped by approximately 90% for an effective stress increase of 10 MPa.

Krishna–Godavari Basin↗

USGS2019

Pressure core based onshore laboratory analysis on mechanical properties of hydrate-bearing sediments recovered during India's National Gas Hydrate Program Expedition (NGHP) 02

A solid understanding of the mechanical properties of hydrate-bearing sediments is essential for the safe and economic development of methane hydrate as an energy resource. In 2015, 104 pressure cores were collected, recovering sediments from above and within concentrated hydrate reservoirs in the Krishna-Godavari Basin, as part of India’s National Gas Hydrate Program Expedition 02 (NGHP-02). These cores provided minimally-disturbed sediment, retained at pressures and temperatures within the hydrate stability field, for the first-ever systematic triaxial test of dozens of subsections of hydrate-bearing pressure core sediments. Post-cruise testing in Japan, evaluated multiple physical and hydro-mechanical properties. Consolidated drained and undrained triaxial compression tests, uniaxial (unconfined in effective stress) compression tests, multistage consolidation and compression tests, and alternating strain-rate compression tests were also performed. Triaxial compression test results showed an increase in the strength and stiffness, as well as the positive dilatancy, with increasing hydrate saturation, supporting previous research on laboratory-formed and natural hydrate-bearing sediments. However, some strength results in this study were low compared to prior analyses of hydrate-bearing sediments. This low strength was likely caused by the host sediment’s small particle size and loose packing, and the relatively slow applied compression strain rate. Results from uniaxial compression and multi-step compression tests confirmed that pore-space hydrates produce an apparent cohesion in hydrate-bearing sediment. More severe strength loss in sediments during the initial loading for multistage compression was also attributable to the presence of hydrates. The applicability of this multistage compression test for determining in situ properties was not confirmed, but results do provide bounds on the in situ values. Finally, from the variable strain-rate tests, it was revealed that strength in hydrate-bearing sediment has a large strain-rate dependence.

Marine and Petroleum Geology↗

USGS2019

India National Gas Hydrate Program Expedition 02 summary of scientiﬁc results: Numerical simulation of reservoir response to depressurization

The India National Gas Hydrate Program Expedition 02 (NGHP-02) discovered gas hydrate at high saturation in sand reservoirs at several sites in the deepwater Bay of Bengal. To assess the potential response of those deposits to scientific depressurization experiments, comprehensive geologic models were constructed to enable numerical simulation for two sites. Both sites (NGHP-02-09 and NGHP-02-16) feature thick sequences of thinly-interbedded reservoir and non-reservoir facies at sub-seafloor depths of less than 300 m and sub-sea depths of 2,400 m or more. These settings pose significant challenges to current modeling capabilities. First, the thinly-bedded reservoir architecture complicates the determination of basic reservoir parameters from both log and core data due to measurement resolution issues. Secondly, the fine-scale variation in sediment properties imparts great contrasts in key parameters over very short distances, creating high gradients at multiple scales and varying orientations that necessitate careful design of high-definition simulation grids. Thirdly, the deposits include internal sources of water, as well as a range of complex boundary conditions, including variable permeability within the overlying mud-rich “seals”, that complicate reservoir depressurization. Lastly, because of the unique combination of great water depth and relatively shallow sub-seafloor depth, models designed to maximize the dissociation rate impose large pressure drawdowns on relatively low-strength sediments. This condition renders the proper evaluation and integration of the geomechanical response to hydrate dissociation critical. In this report, we review the history of gas hydrate reservoir simulation, discuss methods for creating geologic input models, and summarize the key findings and implications of the collaborative NGHP-02 numerical simulation effort. Together, the studies confirm the viability of the modeled accumulations for scientific testing and identify key challenges related to the selection of specific test sites and the design of test wells.

Journal of Marine and Petroleum Geology↗