Geology topics

Yang Cheng

Publications and source records attributed to Yang Cheng.

5 recordsLinked to original sources

USGS2024

Scattered tree death contributes to substantial forest loss in California

In recent years, large-scale tree mortality events linked to global change have occurred around the world. Current forest monitoring methods are crucial for identifying mortality hotspots, but systematic assessments of isolated or scattered dead trees over large areas are needed to reduce uncertainty on the actual extent of tree mortality. Here, we mapped individual dead trees in California using sub-meter resolution aerial photographs from 2020 and deep learning-based dead tree detection. We identified 91.4 million dead trees over 27.8 million hectares of vegetated areas (16.7-24.7% underestimation bias when compared to field data). Among these, a total of 19.5 million dead trees appeared isolated, and 60% of all dead trees occurred in small groups ( ≤ 3 dead trees within a 30 × 30 m grid), which is largely undetected by other state-level monitoring methods. The widespread mortality of individual trees impacts the carbon budget and sequestration capacity of California forests and can be considered a threat to forest health and a fuel source for future wildfires.

California↗

USGS2023

Interlaboratory comparison of testing hydraulic, elastic, and failure properties in compression: Lessons learned

Many geoscientific problems require us to exploit synergies of experimental and numerical approaches, which in turn lead to questions regarding the significance of experimental details for validation of numerical codes. We report results of an interlaboratory comparison regarding experimental determination of mechanical and hydraulic properties of samples from five rock types, three sandstone varieties with porosities ranging from 5% to 20%, a marble, and a granite. The objective of this study was to build confidence in the participating laboratories’ testing approaches and to establish tractable standards for several physical properties of rocks. We addressed the issue of sample-to-sample variability by investigating the variability of basic physical properties of samples of a particular rock type and by performing repeat tests. Compressive strength of the different rock types spans an order of magnitude and shows close agreement between the laboratories. However, differences among stress–strain relations indicate that the external measurement of axial displacement and the determination of system stiffness require special attention, apparently more so than the external load measurement. Furthermore, post-failure behavior seems to exhibit some machine-dependence. The different methods used for the determination of hydraulic permeability, covering six orders of magnitude for the sample suite, yield differences in absolute values and pressure dependence for some rocks but not for others. The origin of the differences in permeability, in no case exceeding an order of magnitude, correlate with the compressive strength and potentially reflect a convolution of end plug–sample interaction, sample-to-sample variability, heterogeneity on sample scale, and/or anisotropy, the last two aspects are notably not accounted for by the applied evaluation procedures. Our study provides an extensive data set apt for “benchmarking” considerations, be it regarding new laboratory equipment or numerical modeling approaches.

Environmental Earth Sciences↗

USGS2023

Increasing Alaskan river discharge during the cold season is driven by recent warming

Arctic hydrology is experiencing rapid changes including earlier snow melt, permafrost degradation, increasing active layer depth, and reduced river ice, all of which are expected to lead to changes in stream flow regimes. Recently, long-term (>60 years) climate reanalysis and river discharge observation data have become available. We utilized these data to assess long-term changes in discharge and their hydroclimatic drivers. River discharge during the cold season (October–April) increased by 10% per decade. The most widespread discharge increase occurred in April (15% per decade), the month of ice break-up for the majority of basins. In October, when river ice formation generally begins, average monthly discharge increased by 7% per decade. Long-term air temperature increases in October and April increased the number of days above freezing (+1.1 d per decade) resulting in increased snow ablation (20% per decade) and decreased snow water equivalent (−12% per decade). Compared to the historical period (1960–1989), mean April and October air temperature in the recent period (1990–2019) have greater correlation with monthly discharge from 0.33 to 0.68 and 0.0–0.48, respectively. This indicates that the recent increases in air temperature are directly related to these discharge changes. Ubiquitous increases in cold and shoulder-season discharge demonstrate the scale at which hydrologic and biogeochemical fluxes are being altered in the Arctic.

Alaska↗

USGS2022

Global cycling and climate effects of aeolian dust controlled by biological soil crusts

Biological soil crusts (biocrusts) cover ~12% of the global land surface. They are formed by an intimate association between soil particles, photoautotrophic and heterotrophic organisms, and they effectively stabilize the soil surface of drylands. Quantitative information on the impact of biocrusts on the global cycling and climate effects of aeolian dust, however, is not available. Here, we combine the currently limited experimental data with a global climate model to investigate the effects of biocrusts on regional and global dust cycling under current and future conditions. We estimate that biocrusts reduce the global atmospheric dust emissions by ~60%, preventing the release of ~0.7 Pg dust per year. Until 2070, biocrust coverage is expected to be severely reduced by climate change and land-use intensification. The biocrust loss will cause an increased dust burden, leading to a reduction of the global radiation budget of around 0.12 to 0.22 W m−2, corresponding to about 50% of the total direct forcing of anthropogenic aerosols. This biocrust control on dust cycling and its climate impacts have important implications for human health, biogeochemical cycling and the functioning of the ecosystems, and thus should be considered in the modelling, mitigation and management of global change.

Nature Geoscience↗

USGS2005

Initial results of rover localization and topographic mapping for the 2003 mars exploration rover mission

This paper presents the initial results of lander and rover localization and topographic mapping of the MER 2003 mission (by Sol 225 for Spirit and Sol 206 for Opportunity). The Spirit rover has traversed a distance of 3.2 km (actual distance traveled instead of odometry) and Opportunity at 1.2 km. We localized the landers in the Gusev Crater and on the Meridiani Planum using two-way Doppler radio positioning technology and cartographic triangulations through landmarks visible in both orbital and ground images. Additional high-resolution orbital images were taken to verify the determined lander positions. Visual odometry and bundle-adjustment technologies were applied to overcome wheel slippages, azimuthal angle drift and other navigation errors (as large as 21 percent). We generated timely topographic products including 68 orthophoto maps and 3D Digital Terrain Models, eight horizontal rover traverse maps, vertical traverse profiles up to Sol 214 for Spirit and Sol 62 for Opportunity, and five 3D crater models. A web-based landing-site Geographic Information System (GIS) has been set up at The Ohio State University to update and disseminate the daily localization and topographic information to support tactical and strategic operations of the mission. Also described in this paper are applications of the data for science operations planning, geological traverse survey, survey of wind-related features, and other science applications. The majority of the instruments onboard both rovers are healthy at this moment, and they will continue to explore the two landing sites on the Martian surface. We expect to report further localization and topographic mapping results to be achieved in the rest of the mission period and in post-mission data processing.

Photogrammetric Engineering and Remote Sensing↗